should be fine on either ubuntu 20.04/21.04 as Huevos applied the needed patches to the OE-A for 21.04Originally Posted by lincsat
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Do you need nodejs/qt/stalker/kodi?
I don't and have copied the oe-alliance-feeds.bbappend file from the previous folder
Huevos (17-03-22)
I have successfully built a Vu+ Ultimo4K image but am failing on the ZGemma H7 image.
This is the section in the cooker log
I have attached the compile log. Hopefully someone can have a look, if you need anything else let me knowCode:ERROR: libdvdcss-1.4.3+gitAUTOINC+ba96b4b2aa-r0 do_compile: oe_runmake failed ERROR: libdvdcss-1.4.3+gitAUTOINC+ba96b4b2aa-r0 do_compile: ExecutionError('/home/openvixbuilder/6.1/openvix/build-enviroment/builds/openvix/developer/h7/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/libdvdcss/libdvdcss-1.4.3+gitAUTOINC+ba96b4b2aa-r0/temp/run.do_compile.3229505', 1, None, None) ERROR: Logfile of failure stored in: /home/openvixbuilder/6.1/openvix/build-enviroment/builds/openvix/developer/h7/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/libdvdcss/libdvdcss-1.4.3+gitAUTOINC+ba96b4b2aa-r0/temp/log.do_compile.3229505 NOTE: recipe libdvdcss-1.4.3+gitAUTOINC+ba96b4b2aa-r0: task do_compile: Failed ERROR: Task (/home/openvixbuilder/6.1/openvix/build-enviroment/meta-oe-alliance/meta-oe/recipes-multimedia/vlc/libdvdcss_git.bb:do_compile) failed with exit code '1'
Can you try cleaning the recipe and start again.
Not sure how to clean an individual recipe, so have cleared the lot and started again from scratch. It's running now
Would be like this (making the path correct for your build env):
Code:cd /home/openvix/6.1/builds/openvix/developer/vuultimo4k . env.source bitbake -c clean libdvdcss bitbake libdvdcss
I've done another build today and compiling the usb-dvb-dvbsky is failing. I did try purging that and recompiling it but that still fails. I've attached the log
EDIT: A ZGemma build succeeds OK, Ultimo4K fails
Last edited by lincsat; 21-03-22 at 17:31.
Its a Vu+ requirement.
When I had xtrends, I permanently removed this from my builds because it always failed.
However, if you don,t need it trying removing from the makefile not a good fix, but sometimes you just need to move on…..
oe-alliance-core/meta-oe/recipes-oe-alliance/enigma2-dvb-drivers/dvb-usb-drivers-meta.bb
And then to be doubly sure rename the .bb to .xx
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
lincsat (22-03-22)
Thanks, I'll give that a try.
The edit I added was because a ZGemma build successfully builds the enigma2-plugin-drivers-dvb-usb-dvbsky-classic_2.0-r2_all.ipk, don't know if that's any different
Just a quick question regarding feeds.
I built a release version of ViX 6.1 and uploaded the feeds to my own server but I'm only getting picons and settings in the plugin downloads.
I then built a developer version without feeds and it's the same.
Should the developer version have the feeds already online?
I followed the build instructions here:
2022-03-23_191627.png
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Zero 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################
So your feeds are built in your build directory, but in /meta-oe/conf/distro/openvix.conf, the feeds point to openvix(see below) so you need to change to whereever you decide to keep them.
Huevos sets a link to where they are built on the PC, I change it to my NAS (but have to move the feeds there after building)
DISTRO_FEED_URI ?= "${@bb.utils.contains("DISTRO_TYPE", "release", "http://www.openvix.co.uk/feeds/${DISTRO_NAME}/${DISTRO_TYPE}/${DISTRO_VERSION}/${MACHINE}" , "http://openvixdev.satellites-xml.org/feeds/${DISTRO_NAME}/${DISTRO_TYPE}/${DISTRO_VERSION}/${MACHINE}", d)}"
When you flash the image, the feeds are in /etc/opkg so you can change the 4 or 5 files to point to your actual built feeds, but thats usually last resort, much easier to change them in the conf file
Last edited by twol; 23-03-22 at 20:53.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
What does this mean? "and uploaded the feeds to my own server". Have you updated the feeds URI to reflect that location?
This is from my site.conf
2022-03-23_201528.jpgCode:DISTRO_FEED_URI = "http://willobuild.net/files/feeds/${DISTRO_NAME}/${DISTRO_TYPE}/${DISTRO_VERSION}/${MACHINE}"
The 6.1 directory was originally in release but I moved it to developer to test it.
I just left the developer build with default feeds expecting that they would be on the vix server.
Last edited by Willo3092; 23-03-22 at 21:18.
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Zero 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################
You are missing the MACHINE folder from your file path.Code:DISTRO_FEED_URI = "http://willobuild.net/files/feeds/${DISTRO_NAME}/${DISTRO_TYPE}/${DISTRO_VERSION}/${MACHINE}"
Willo3092 (23-03-22)
Posting Permissions
Reply With Quote