Also, from the debug log...
Means it is accessing the feeds. If not it would say...Code:22:06:05.3185 [OnlineUpdateCheck][kernelMismatch] no kernel mismatch found
Code:[OnlineUpdateCheck][kernelMismatch] error fetching http://myvixbuild.xyz/feeds/openvix/release/5.5/sf8008/sf8008/Packages.gz
If I go into the install plugins screen I just get a blank screen and pressing any button brings up the access denied symbol at top right.
1_0_19_22D9_80D_2_11A0000_0_0_0_20210915095508.jpg
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Just tested downloading a skin via putty using the full path and it downloaded and installed okay:
Code:opkg install http://myvixbuild/feeds/openvix/release/5.5/sf8008/sf8008/enigma2-plugin-skins-openvix-youvix-purple_5.5+git2786+331c423-r4_sf8008.ipk
Would it be because I built a release image perhaps? Does it need to be developer at this stage.
I've tried the PluginBrowser.py from the dev build but that doesn't make any difference either.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
They're on a NAS.
I've now tried to use the feeds from the openvix-5.5.015.003.Py3-sf8008_mmc.zip and that doesn't work either although the About Boxbranding screen shows my server address so not sure if I need to change something there?
I've also tried the PluginBrowser.py from that image as well.
I've also built images for 2 different boxes and they are the same as well.
I can download from my server through a browser and via putty using the same url as in the feeds and I've set the feeds up exactly the same as in ViX 5.4 which works perfectly.
Running out of ideas now
Last edited by twol; 15-09-21 at 19:00.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Sorry, my bad. It's not a NAS it's on my website on hosting24.
I can access plugin feeds on it from a ViX 5.4 build with no problems.
Everything exactly the same apart from the feeds are in a 5.5 directory rather than 5.4.
@Willo3092 - You are going to hate this - installed your opkg feed conf's, and listed plugins no issues.
Telnet to box, opkg update ............ downloads from your build url .... no issues
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (16-09-21)
Thanks twol, I really appreciate you taking the time to test. At least I know it's not my server or feeds now.
Must be something wrong with the image I'm building then because I get the same on 3 different boxes.
I set my build environment up using the guide for ATV 7.0, is it any different for ViX and is there a github page with a guide?
There is:
https://github.com/OpenViX/enigma2/t...on3-compatible
but its basically same as OpenATV.
I still believe its a hang on the network.
Download for instance Huevos py3 sf8008, flash a slot and then replace the /etc/opkg feed conf files with yours.... see if that works......... if you need another box then let me know and I will build it - at the moment I can still do it(my office will be empty shortly as we are having new floors and room has to be emptied).
If it works its your build, which I find hard to believe - unless you are excluding some files from the build
if it doesn't work then its your network access.
Last edited by twol; 16-09-21 at 11:42.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (16-09-21)
I copied my feeds to Huevos py3 build and all working fine
As you say I will have to look at the image because I did exclude some stuff weeks ago when I kept getting build failures on a mips box.
I'll try building again without the exclusions. Thanks twol