Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 7 FirstFirst 1234 ... LastLast
Results 16 to 30 of 91

Thread: Multiboot error - no startup in boot partition

  1. #16
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Which version of Vix please - be precise!
    SO flashed from which version to which version?
    Can you also give me a screen shot - use the web interface its easier.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  2. #17

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Quote Originally Posted by twol View Post
    Which version of Vix please - be precise!
    SO flashed from which version to which version?
    Can you also give me a screen shot - use the web interface its easier.
    Using vix 5.2.026

  3. #18

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Installed openatv 6.2 into slot 2. Openvix reboots but the LCD panel on front says boot and it doesn't do anything.

  4. #19
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    maybe you added a LCD skin that crashed , hence display is blank

  5. #20

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Quote Originally Posted by abu baniaz View Post
    maybe you added a LCD skin that crashed , hence display is blank
    ?? You cannot add a skin as it is just a number LCD.

  6. #21
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by Coldfire View Post
    Installed openatv 6.2 into slot 2. Openvix reboots but the LCD panel on front says boot and it doesn't do anything.
    So ViX 5.2.26 is in slot 1? You flashed OpenATV into slot 2 with ViX and now its stuck in boot?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  7. #22

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Quote Originally Posted by twol View Post
    So ViX 5.2.26 is in slot 1? You flashed OpenATV into slot 2 with ViX and now its stuck in boot?
    Yep followed all the instructions to a t. Openvix is in slot one and openatv in slot 2. It just won't boot

  8. #23
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    So power off, remove the sdcard and it should boot into slot 1.
    Then menu/info .. confirm what version is running.
    Put into deep standby , reinsert teh sdcard, power up.
    Then long press power button, multiboot and see what the system thinks is on the slots
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  9. #24
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Quote Originally Posted by Coldfire
    [quote name="abu baniaz" post=481642]maybe you added a LCD skin that crashed , hence display is blank


    ?? You cannot add a skin as it is just a number LCD.[/quote]
    sorry.

  10. #25

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Says successfully flashed and then rebooting box. The boot shows on LCD and the screen shows the satellite image and thengoes black and back to the satellite image

  11. #26

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Taken the SD card out and still doesn't boot

  12. #27

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Ok so powered on pressing power button and then selected slot 2. Booted into openatv setup and then longer pressed power button went to multiboot and selected slot 1 and it booted openvix but going to multiboot in openvix and selected slot 2 it will get stuck in a boot loop again and will not boot

  13. #28
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Well it should do! But no help to you.
    I have just tried and works perfectly for me ...... put the sd card back in and reboot and boots to the sd card.

    So you will have to usb flash the latest ViX then turn on debug logs and save them to usb.
    Flash ATV to slot 2 and if it fails then pull off the log from the usb (will be in logs directory) via PC and post here please.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  14. #29

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    Quote Originally Posted by twol View Post
    Well it should do! But no help to you.
    I have just tried and works perfectly for me ...... put the sd card back in and reboot and boots to the sd card.

    So you will have to usb flash the latest ViX then turn on debug logs and save them to usb.
    Flash ATV to slot 2 and if it fails then pull off the log from the usb (will be in logs directory) via PC and post here please.
    Just openvix to anything else will not boot by multiboot in standby/restart then multiboot.

  15. #30

    Title
    Senior Member
    Join Date
    May 2013
    Posts
    256
    Thanks
    25
    Thanked 22 Times in 19 Posts
    It doesn't fail the install it just doesn't boot when it reboots.

Page 2 of 7 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.