Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 10 of 10

Thread: Need Help

  1. #1

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Need Help

    Hi,
    anyone help me.i using openatv image & try to openpli image.after the installation Multiboot press & rebooting start.after then in receiver display show (hd51 stb 4k)no thing work also remote cannot work.please help me.
    i get hd51 STB 4K on display , but doesnt seem to have rebooted.
    thanks.
    Last edited by pk12; 23-12-18 at 17:11.

  2. #2

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts
    my issue solved.before power plugin i push the power button.after some time it will be rebooted with openatv image started.

  3. #3

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts
    again before power plugin i push the power button please help me.

  4. #4

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts
    my openATV image in STARTUP-2 but STARTUP-2 cannot show in Flash online.these shows in FLASH ONLINE(STARTUP --STARTUP-1--STARTUP-3 & STARTUP-4).how can i do

  5. #5
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    If it doesn‘t show then you may have a corrupted boot partition.
    Access the receiver with filezilla (ip address, root, no password), then see whats in /boot
    You should have STARTUP and STARTUP_1 ——> STARTUP_4
    WHen you boot it will use STARTUP, so what is booting up ATV or ?
    It would help if you could copy to a PC and then post the files here.

    You would be better with ViX at least OpenViX tells you what image is in each multiboot slot - rather than the useless STARTUP information
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  6. #6

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts
    these boots files
    STARTUP(boot emmcflash0.kernel2 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1')
    STARTUP_1(boot emmcflash0.kernel1 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1')
    STARTUP_2(boot emmcflash0.kernel2 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1')
    STARTUP_3(boot emmcflash0.kernel3 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p7 rw rootwait hd51_4.boxmode=1')
    STARTUP_4(boot emmcflash0.kernel4 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p9 rw rootwait hd51_4.boxmode=1')

  7. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    See PM...............
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  8. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    You should not be pushing the power button on the receiver.
    Do everything via the remote
    Long press the remotes power button and select multiboot then choose image you want to boot.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  9. #9

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts
    help me what i can do.

  10. #10
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    To install OpenViX download and ftp to a library used by OpenATV to store downloads (HDD/usb) and use flashonline
    For openpli download the multiboot version (there are 2 versions for the HD51 - one for multiboot, one for usb flashing) and then ftp to the receiver etc.
    In OPenViX, you use the ViX plugin & ImageManager to do all this.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.