Changed channel and then crashed, loop of GUI-restart.
Ref: 1544522579.46 mailed.
Forgot that I had to cut the Power to end the loop, after Cold-boot all seems to be OK for now.
Cheers!
Changed channel and then crashed, loop of GUI-restart.
Ref: 1544522579.46 mailed.
Forgot that I had to cut the Power to end the loop, after Cold-boot all seems to be OK for now.
Cheers!
Vu+ Duo 4K 1 x FBC S2(X) on 0.8º W, 4 TB HD 2.5"
Vu+ Ultimo 4K 1 x FBC S2(X) on 0.8º W, 2 TB HD 2.5"
All with latest stable image
80 cm dish with Diavolo Unicable II LNB
noticed same here on both duo2 boxes yesterday.After hard reboot all fine and observing.Thought it was a problem with EPG.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
I don't think anyone reads those crash log emails. You need to attach them to the forum.
Toja60 (11-12-18)
OK, I will attach the file here, so it might be helpful
Vu+ Duo 4K 1 x FBC S2(X) on 0.8º W, 4 TB HD 2.5"
Vu+ Ultimo 4K 1 x FBC S2(X) on 0.8º W, 2 TB HD 2.5"
All with latest stable image
80 cm dish with Diavolo Unicable II LNB
logs where not enabled and hard reboot so no logs saved
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
+1 for crashes on duo2 at the minute on 5.2.018, I have seen a crash when using client mode, main box dies and only way to recover is power cycle. No idea if its related.
mainbox duo2, clientbox = duo
I have a Solo4K and an older Solo2, both running the latest Openvix, and yesterday the Solo2 was frozen in standby and now just loops starting the GUI. I've tried everything, removing power and reflashing from usb (front and rear with different flash drives used previously) but it won't acknowledge the usb sticks. I've usb flashed this box many times with major Openvix updates with the same usb sticks which work in my Solo4K so I'm wondering if it's a hardware failure. The EPG data is on the rear usb stick and it's got a 1TB internal hard drive. I bought this about 30 months ago from the sponsors. Has anyone any ideas ?
Take the usb out of the rear port if you are trying to flash via usb. Also can I ask why you are storing epg data to a usb when you have an internal HDD?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Yes, I can connect to the Solo2 for some of the time immediately after a reboot then after a few GUI loops the box freezes and I lose the connection.
I've always used filezilla to copy IPTV and VPN etc. settings files to the two boxes. This is the first problem I've had with either Vu+ receiver.
I got the Solo4K about a year ago after I got a 55" LG OLED 4K TV and moved the Solo2 to use in my study with a 42" LG 3D HD TV.
Once you've got logged in with telnet/putty, type init 4
This will stop enigma. Then have a look at this thread to get debug logs....
https://www.world-of-satellite.com/s...Linux-commands
Glad you are sorted. Remember to go into your EPG settings and store to your HDD, then you can get rid of the usb and use it for something else.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)