Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.

View Entry Info: Crashed and unstopable GUI-loop

Category:
Possible Bug
What ViX Image build number are you using?
Please provide your ViX Team image build number. Menu > Information > About > Build number > ENTER THIS NUMBER e.g. 4.2.028
5.2.018
Have you tried a flash WITHOUT settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
No
Have you tried a flash WITH settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
No
Attachments
Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Crashed and unstopable GUI-loop

  1. #1

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2016
    Location
    Sweden
    Posts
    75
    Thanks
    74
    Thanked 8 Times in 6 Posts

    Crashed and unstopable GUI-loop

    Changed channel and then crashed, loop of GUI-restart.

    Ref: 1544522579.46 mailed.

    Forgot that I had to cut the Power to end the loop, after Cold-boot all seems to be OK for now.

    Cheers!
    Vu+ Duo 4K 1 x FBC S2(X) on 0.8º W, 4 TB HD 2.5"
    Vu+ Ultimo 4K 1 x FBC S2(X) on 0.8º W, 2 TB HD 2.5"
    All with latest stable image
    80 cm dish with Diavolo Unicable II LNB

  2. #2
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,725
    Thanks
    58
    Thanked 317 Times in 273 Posts
    noticed same here on both duo2 boxes yesterday.After hard reboot all fine and observing.Thought it was a problem with EPG.
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  3. #3
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,360
    Thanks
    6,440
    Thanked 9,160 Times in 6,235 Posts
    I don't think anyone reads those crash log emails. You need to attach them to the forum.

  4. The Following User Says Thank You to abu baniaz For This Useful Post:

    Toja60 (11-12-18)

  5. #4

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2016
    Location
    Sweden
    Posts
    75
    Thanks
    74
    Thanked 8 Times in 6 Posts
    OK, I will attach the file here, so it might be helpful
    Attached Files Attached Files
    Vu+ Duo 4K 1 x FBC S2(X) on 0.8º W, 4 TB HD 2.5"
    Vu+ Ultimo 4K 1 x FBC S2(X) on 0.8º W, 2 TB HD 2.5"
    All with latest stable image
    80 cm dish with Diavolo Unicable II LNB

  6. #5
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,725
    Thanks
    58
    Thanked 317 Times in 273 Posts
    logs where not enabled and hard reboot so no logs saved
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  7. #6
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,777
    Thanks
    237
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by Toja60 View Post
    OK, I will attach the file here, so it might be helpful
    It's got a SIGSEGV in the eventData destructor (eventData::~eventData()).
    Not sure how helpful that may be...
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  8. #7

    Title
    Member
    Join Date
    Jul 2013
    Posts
    57
    Thanks
    0
    Thanked 2 Times in 2 Posts
    +1 for crashes on duo2 at the minute on 5.2.018, I have seen a crash when using client mode, main box dies and only way to recover is power cycle. No idea if its related.

    mainbox duo2, clientbox = duo

  9. #8

    Title
    Junior Member
    Join Date
    Feb 2011
    Location
    Northeast UK
    Posts
    26
    Thanks
    5
    Thanked 3 Times in 2 Posts
    I have a Solo4K and an older Solo2, both running the latest Openvix, and yesterday the Solo2 was frozen in standby and now just loops starting the GUI. I've tried everything, removing power and reflashing from usb (front and rear with different flash drives used previously) but it won't acknowledge the usb sticks. I've usb flashed this box many times with major Openvix updates with the same usb sticks which work in my Solo4K so I'm wondering if it's a hardware failure. The EPG data is on the rear usb stick and it's got a 1TB internal hard drive. I bought this about 30 months ago from the sponsors. Has anyone any ideas ?

  10. #9
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Take the usb out of the rear port if you are trying to flash via usb. Also can I ask why you are storing epg data to a usb when you have an internal HDD?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  11. #10

    Title
    Junior Member
    Join Date
    Feb 2011
    Location
    Northeast UK
    Posts
    26
    Thanks
    5
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by Andy_Hazza View Post
    Take the usb out of the rear port if you are trying to flash via usb. Also can I ask why you are storing epg data to a usb when you have an internal HDD?


    Sent from my iPhone using Tapatalk
    I tried reflashing from the front usb with the rear one both in and out and it made no difference. I thought it was a good idea to have the EPG on the rear usb to avoid waking the hdd so would be faster. Is that not the case ?

  12. #11
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by artful View Post
    I tried reflashing from the front usb with the rear one both in and out and it made no difference. I thought it was a good idea to have the EPG on the rear usb to avoid waking the hdd so would be faster. Is that not the case ?
    Storing the epg data to your HDD is fine, no need for epg on a usb. Can you still connect to the Solo2 via something like filezilla?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  13. #12

    Title
    Junior Member
    Join Date
    Feb 2011
    Location
    Northeast UK
    Posts
    26
    Thanks
    5
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by Andy_Hazza View Post
    Storing the epg data to your HDD is fine, no need for epg on a usb. Can you still connect to the Solo2 via something like filezilla?


    Sent from my iPhone using Tapatalk
    Yes, I can connect to the Solo2 for some of the time immediately after a reboot then after a few GUI loops the box freezes and I lose the connection.

    I've always used filezilla to copy IPTV and VPN etc. settings files to the two boxes. This is the first problem I've had with either Vu+ receiver.

    I got the Solo4K about a year ago after I got a 55" LG OLED 4K TV and moved the Solo2 to use in my study with a 42" LG 3D HD TV.

  14. #13
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,277 Times in 1,089 Posts
    Once you've got logged in with telnet/putty, type init 4

    This will stop enigma. Then have a look at this thread to get debug logs....

    https://www.world-of-satellite.com/s...Linux-commands

  15. #14

    Title
    Junior Member
    Join Date
    Feb 2011
    Location
    Northeast UK
    Posts
    26
    Thanks
    5
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by ccs View Post
    Once you've got logged in with telnet/putty, type init 4

    This will stop enigma. Then have a look at this thread to get debug logs....

    https://www.world-of-satellite.com/s...Linux-commands
    Thanks all for the advice, as a last resort I tried an alternative 2GB usb stick and was able to reflash with the latest openvix and restore my latest backup and it's working fine. No idea what caused the problem.

  16. #15
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Glad you are sorted. Remember to go into your EPG settings and store to your HDD, then you can get rid of the usb and use it for something else.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.