Evening guys, i have just tried updating my Vu Uno from 5.2.011 to the latest version however upon reboot its stuck on starting and I can’t get it past this point.
Any ideas how I can troubleshoot or is a re-flash my quickest option?
Evening guys, i have just tried updating my Vu Uno from 5.2.011 to the latest version however upon reboot its stuck on starting and I can’t get it past this point.
Any ideas how I can troubleshoot or is a re-flash my quickest option?
If you start in console mode, it will show error. Guide in my signature if you need it.
Thanks Abu, will let you know
Sent from my iPhone using Tapatalk
I just checked your guide and it mentions the use of putty, only problem I got is the box is not responding to a ping there I doubt I will be able to communicate with it. The red light is on the front along with the words “starting”. Do you think the box is knackered or will a reflash work?
Sent from my iPhone using Tapatalk
Might have run out of space as we install several skins now. Or PSU has died.
Try a reflash.
Reflash sorted it, once I restored from backup I had 15M flash available. My box has nothing extra installed on it apart from Sundek Control Panel & an extra skin. I removed the new skins which increased the flash to 20M, do you think this could have caused the crash?
Sent from my iPhone using Tapatalk
You might just ensure that logs go to other than flash (setup, system, logs, settings) so that if there is a crash you can post the log.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
abu baniaz (28-11-18)
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi Andy, yes I have a 256MB swap on the hard disk configured
Sent from my iPhone using Tapatalk
Andy_Hazza (28-11-18)