Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 5 123 ... LastLast
Results 1 to 15 of 61

Thread: VU+ Solo SE v2 Tuner problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts

    VU+ Solo SE v2 Tuner problem

    I've started getting "Tuner failed" notifications on my second DVB-C - B Tuner.
    The configuration is no different to the DVB-C A Tuner, but until I disable it, I cannot re-scan the Bouquetmaker without the same message appearing and stopping the process.
    When disabled, the scan works correctly.
    Do I need a new DVB-C B tuner, or is something else happening here.
    I'm running Open VIX
    Thanks

  2. #2

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,009
    Thanks
    1,347
    Thanked 427 Times in 391 Posts
    recheck your getting a signal on both tuners.

  3. #3

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    I don't think I am, because the message comes up "cannot load channels"
    As I understand it, this VU+ has only one coaxial input which should be automatically shared with both tuners...
    Perhaps if it's a plugin module on the M/B, I should remove and re-seat ?

  4. #4

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    My version is fitted with a 1X TWIN HYBRID DVB-C/T/T2 TUNER MODULE.
    I'm trying to find out if I need to replace the Tuner.

  5. #5
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    Thread retitled from
    VU+Solo 2 SE Tuner problem

    to
    VU+ Solo SE V2 Tuner problem


  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    "cannot load channels"

    That is more likely a configuration/image error than tuner issue. If the tuner was faulty, you would get tune failed message.

    Which image are you on by the way? Please don't say "latest"

  7. #7

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by abu baniaz View Post
    "cannot load channels"

    That is more likely a configuration/image error than tuner issue. If the tuner was faulty, you would get tune failed message.

    Which image are you on by the way? Please don't say "latest"
    Sorry but this technical stuff is going over my head.... and I have unintentionally mislead you.....
    The alert box error, is indeed, "Error Tuner fail" and the Image is VIX 5.1.002 ( release )
    I have tried pulling the tuner and re-seating, which didn't solve the problem.
    What I can also tell you is, with Tuner B disconnected in the config, the VU+ works perfectly on the remaining Tuner A.
    As soon as I re-connect it in it's config, the same settings come up as on Tuner A, and any attempt to record two channels or record one channel and try to watch a second different channel causes the "Error Tuner fail" alert box.
    Hope this information allows you to help me further....

  8. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    Both tuners are on one card, you can't really replace one of them. If it is faulty. you will have to replace the whole card. Try reseating it first.

    Can you also paste the output of this command please. Use Putty or terminal. Guide in my signature if you need it.
    Code:
    cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt
    Can you please post the debug log after you run ABM. See this thread:
    https://www.world-of-satellite.com/s...port-questions

  9. #9
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts

    VU+ Solo SE v2 Tuner problem

    There was a bug that affected twin tuner modules on the Vu receivers. I am not sure if your receiver was affected. We added a workaround for them.

    Can you flash 5.2 001 and see if it is the same?

  10. #10

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by abu baniaz View Post
    There was a bug that affected twin tuner modules on the Vu receivers. I am not sure if your receiver was affected. We added a workaround for them.

    Can you flash 5.2 001 and see if it is the same?
    I have flashed 5.2.001 and it has not cured my problem, I still get "Tuner failed"
    On top of that, I have lost my old AutoBouquetMaker so the channels are just one long list in dir Last Scanned... How can I get it back, it doesn't appear to be in the pluggin list ?

    Any help would be appreciated......

  11. #11
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    Quote Originally Posted by abu baniaz View Post
    There was a bug that affected twin tuner modules on the Vu receivers. I am not sure if your receiver was affected. We added a workaround for them.
    I have looked the bug section, one of the posts said the bug only affected receivers with three tuners. So that is ruled out.

  12. #12
    dsayers's Avatar
    Title
    ViX Beta Tester
    Join Date
    Mar 2016
    Posts
    1,764
    Thanks
    473
    Thanked 607 Times in 433 Posts
    Quote Originally Posted by abu baniaz View Post
    I have looked the bug section, one of the posts said the bug only affected receivers with three tuners. So that is ruled out.
    Wouldn't having dvb-t enabled aswel as having dvb-c be classed as more than 2 tuners enabled?

  13. #13

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    I'll give it a try..... Thanks

  14. #14
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,361
    Thanks
    6,442
    Thanked 9,160 Times in 6,235 Posts
    Did you restore your settings?

    What is special about the older ABM that the newer won't do? ABM is already installed in the ViX image.

    Awaiting results of posts 6 request

  15. #15

    Title
    Member
    Join Date
    Mar 2016
    Posts
    79
    Thanks
    12
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by abu baniaz View Post
    Did you restore your settings?
    I thought I had, but I didn't have an image backup

    Quote Originally Posted by abu baniaz View Post

    What is special about the older ABM that the newer won't do? ABM is already installed in the ViX image.
    The old one sorted channels into categories ie. News, Sport etc, and I can't find a cable ABM in the new Image

    Quote Originally Posted by abu baniaz View Post

    Awaiting results of posts 6 request


    I don't understand how to use putty, I only use FileZilla

Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.