Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: Unicable II, Inverto IDLU-32UL40-UNB00-0PP, FBC tuners

  1. #1

    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2015
    Posts
    22
    Thanks
    8
    Thanked 14 Times in 3 Posts

    Unicable II, Inverto IDLU-32UL40-UNB00-0PP, FBC tuners

    I thought this might help you! I have just managed to record channels simultaneously.
    Here is my setup. I am running OpenVix 5.1 Build 33 on a Vu+ Solo 4K dual FBC tuner

    Unicable 2 LNB attached to Tuner A


    Tuner A
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    SCR (Unicable/JESS) type: LNB
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 1 (1210)
    Connected: No
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner B
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    SCR (Unicable/JESS) type: LNB
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 2 (1420)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner C
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 3 (1680)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner D
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 4 (2040)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner E
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 5(984)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner F
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 6(1020)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner G
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 7(1056)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No

    Tuner H
    Configuration mode: Advanced
    Satellite: 28.2E
    LNB: LNB 1
    Priority: Auto
    Type of LNB/Device: SCR(Unicable/Jess)
    Manufacturer: Inverto
    Model: IDLU-32UL40-UNB00-0PP
    Position: 1
    Channel: User band 8 (1092)
    Connected: Yes
    Connected to: Tuner A (one with wire attached)
    DiSEqC mode: None
    Force legacy signal stats: No



    Ron
    Attached Images Attached Images
    Last edited by abu baniaz; 30-12-18 at 04:48. Reason: SCR > Userband

  2. The Following 4 Users Say Thank You to shortheath For This Useful Post:

    Eifion (05-02-24),ISeeFridges (29-03-19),okmes (17-09-19),Willo3092 (02-09-18)

  3. #2
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    If following above guide for a different device, adjust the manufacturer and model names.
    Ensure that no SCR channel is assigned to more than one tuner across all receivers accessing the LNB


    The sponsor sells a 24 channel LNB which is more than adequate for most people.

    https://www.world-of-satellite.co.uk...e-II-24scr-lnb

  4. The Following 3 Users Say Thank You to abu baniaz For This Useful Post:

    Sicilian (05-09-18),Willo3092 (02-09-18)

  5. #3

    Title
    Junior Member
    Join Date
    Oct 2014
    Posts
    20
    Thanks
    3
    Thanked 1 Time in 1 Post
    Hello, thanks. I've got a FBC (vu duo 4k) tuner connected to a Spaun 21 F with only 2 user bands (SCRS). Does that limit me to use only tuner A and B (connected to A) and leave C-H in FBC automatic mode? In FBC automatic it seems that I am only able to record two channels and then I am restricted to a subset of channels...
    Regards

  6. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    I would attach cables to both physical tuners and leave the other 6 as FBC automatic.

    Best to get a switch with more SCRs

  7. The Following User Says Thank You to abu baniaz For This Useful Post:

    asktrevis (30-09-19)

  8. #5

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Hi all, just changed my LNB to the same Inverto one as detailed here, and set up all 8 tuners as per above. I have a Duo 4k, with a splitter behind the tv, so two feeds to the dual tuner card.
    The issue is that when I try and record more than 3 programs at once, I am getting a conflict report. What have I done wrong?

  9. #6

    Title
    Moderator
    Join Date
    Jul 2011
    Location
    germania
    Posts
    5,122
    Thanks
    106
    Thanked 1,434 Times in 1,137 Posts
    Hi,
    which dual tuner card? With one cable from an JESS/UniCable II LNB you can use all 8 transponder and there should be no conflict. I use only 1 cable from my JESS switch and quad pip on my 4K VUs (incl. Duo4K) is working perfectly. At least my "normal" DVB-S2 FBC modul has 8 tuner on board and can receive 8 transponder with one cable. I do not know if is also the case with the DVB-S2X FBC because I always read here twin tuner.

    Ralf
    ---
    Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
    Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard

  10. #7
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Can you run his command in Putty/terminal and post back the file it creates in /tmp directory
    Code:
    cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt
    See here if required
    https://www.world-of-satellite.com/s...Linux-commands

  11. #8

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Sorry if I'm being thick. I've installed putty and run the command - how do I access the tmp file? Tried windows explorer, but ialthough if finds Vuduo4k as a network element, it says it can't access it.

  12. #9
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Use Filezilla client (or any other FTP software) to transfer files to/from receiver.

  13. #10
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,573
    Thanks
    2,004
    Thanked 4,925 Times in 3,259 Posts
    FTP, e.g. Filezilla.
    Help keep OpenViX servers online.Please donate!

  14. #11

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    config.Nims.0.advanced.lnb.1.lof=unicable
    config.Nims.0.advanced.lnb.1.scrfrequency=1210
    config.Nims.0.advanced.lnb.1.scrList=1
    config.Nims.0.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.0.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.0.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.0.advanced.sat.192.lnb=1
    config.Nims.0.advanced.sat.282.lnb=1
    config.Nims.0.advanced.sats=282
    config.Nims.0.configMode=advanced
    config.Nims.0.diseqcA=282
    config.Nims.0.diseqcB=3601
    config.Nims.0.diseqcC=3601
    config.Nims.0.diseqcD=3601
    config.Nims.1.advanced.lnb.1.lof=unicable
    config.Nims.1.advanced.lnb.1.scrfrequency=1420
    config.Nims.1.advanced.lnb.1.scrList=2
    config.Nims.1.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.1.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.1.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.1.advanced.sat.192.lnb=1
    config.Nims.1.advanced.sat.282.lnb=1
    config.Nims.1.advanced.sats=282
    config.Nims.1.advanced.unicableconnected=True
    config.Nims.1.advanced.unicableconnectedTo=0
    config.Nims.1.configMode=advanced
    config.Nims.1.diseqcA=282
    config.Nims.1.diseqcB=3601
    config.Nims.1.diseqcC=3601
    config.Nims.1.diseqcD=3601
    config.Nims.2.advanced.lnb.1.lof=unicable
    config.Nims.2.advanced.lnb.1.scrfrequency=1680
    config.Nims.2.advanced.lnb.1.scrList=3
    config.Nims.2.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.2.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.2.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.2.advanced.sat.282.lnb=1
    config.Nims.2.advanced.sats=282
    config.Nims.2.advanced.unicableconnected=True
    config.Nims.2.advanced.unicableconnectedTo=0
    config.Nims.2.configMode=advanced
    config.Nims.3.advanced.lnb.1.lof=unicable
    config.Nims.3.advanced.lnb.1.scrfrequency=2040
    config.Nims.3.advanced.lnb.1.scrList=4
    config.Nims.3.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.3.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.3.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.3.advanced.sat.192.lnb=1
    config.Nims.3.advanced.unicableconnected=True
    config.Nims.3.advanced.unicableconnectedTo=0
    config.Nims.3.configMode=advanced
    config.Nims.4.advanced.lnb.1.lof=unicable
    config.Nims.4.advanced.lnb.1.scrList=5
    config.Nims.4.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.4.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.4.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.4.advanced.sat.192.lnb=1
    config.Nims.4.advanced.unicableconnected=True
    config.Nims.4.advanced.unicableconnectedTo=0
    config.Nims.4.configMode=advanced
    config.Nims.5.advanced.lnb.1.lof=unicable
    config.Nims.5.advanced.lnb.1.scrList=6
    config.Nims.5.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.5.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.5.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.5.advanced.sat.192.lnb=1
    config.Nims.5.advanced.unicableconnected=True
    config.Nims.5.advanced.unicableconnectedTo=0
    config.Nims.5.configMode=advanced
    config.Nims.6.advanced.lnb.1.lof=unicable
    config.Nims.6.advanced.lnb.1.scrList=7
    config.Nims.6.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.6.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.6.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.6.advanced.sat.192.lnb=1
    config.Nims.6.advanced.unicableconnected=True
    config.Nims.6.advanced.unicableconnectedTo=0
    config.Nims.6.configMode=advanced
    config.Nims.7.advanced.lnb.1.lof=unicable
    config.Nims.7.advanced.lnb.1.scrList=8
    config.Nims.7.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.7.advanced.lnb.1.unicableManufacturer= Inverto
    config.Nims.7.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
    config.Nims.7.advanced.sat.192.lnb=1
    config.Nims.7.advanced.unicableconnected=True
    config.Nims.7.advanced.unicableconnectedTo=0
    config.Nims.7.configMode=advanced

  15. #12
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Which satellite are you configuring this for? 19.2 or 28.2?

  16. #13

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    it's for 28.2

  17. #14

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    17
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Ah - well spotted! Just seen the problem.

  18. #15
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Make sure you disable 19.2 on all tuners where the mistake has been made. A common mistake is to add 28.2 and leave the incorrect one there.
    Attached Images Attached Images

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.