Hi
I open Setup —> Tuner Config menu but i cannot see Manual and Auto Scan menu. Only the items listed below are seen:
Tuner Setup
Miscellaneous
AutoBouquetsMaker
Blind Scan
Fallback Configuration
How can enable or find Manual or Auto Scan menu item?
What tuner config have you set?
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
How can i find what the tuner config set? Could you please help me to answer your question? From where, i can see what tuner config have set?
go into tuner setup.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
4A6DC2A2-DCD1-4756-9BD8-C159E7D23066.jpgu
I attached that.
We'll have to look into this. There was a change so that those menus do not show if tuners are not set. You can't scan if tuners are not set. Yours are set.
Can you try a restart?
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
I have tried that nothing changed.
I understood that you will look into this. Could you please tell me when you fix that? Thanks.
Can you enable debug logs and restart GUI to activate.
Go into the tuner config menu.
Save debug log to PC and attach here
Can you also run this command. A file called mytunerconfig.txt will be created in /tmp/ directory. Attach it here too. Guide in my signature if you need it. You may want to have a look at the screenshots guide too
Code:cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt
Hi,
I attached debug log file and mytunerconfig.txt file.
abu baniaz (24-06-18)
Tuner 1, port C, this is still set to automatic(auto diseqc). Please set it to a satellite.
Tuner 2. This is still not set. Set it as not configured please. Restart using menus and the try again.
Hi
I have set a satelitte to port c of tuner 1 and also set “not configured” to tuner 2. After reboot, nothing changed, i have not seen the menus yet.
2CE29ABD-60B0-472B-8350-CB688F2C237D.jpg
Be quicker just to reflash the receiver with the latest image.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Sorry to ask, are you rebooting by remote control or using switch at the back?
Ohh, it is very difficult for me. Because i have many customization, settings and plugins. Any shortway for this or will you fix this problem?
Posting Permissions
Reply With Quote