Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: Edision Primo IP S2 - Firmware Recovery/Clean Firmware Flash

  1. #1
    RustySpoons's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2013
    Posts
    89
    Thanks
    36
    Thanked 28 Times in 17 Posts

    Edision Primo IP S2 - Firmware Recovery/Clean Firmware Flash

    If for whatever reason you manged to brick your box or want to do a clean re-install/upgrade (Normal update does not do a clean install and factory reset does not clear everything)



    Warning! this will remove any settings you have changed! Including all channels/transponders you have saved.


    Do the following steps:

    1: Download the firmware you wish to install, unzip it and put it on the root directory of a USB stick (Ideally make sure its formatted first)
    2: Put the USB stick in to one of the USB ports on the receiver.
    2: Unplug power lead from the receiver.
    3: Ensure the HDMI lead is connected and your TV is on and the correct input is selected.
    4: Plug the power cable in, as soon as you see the word "boot" displayed on the front of the receiver press the power button until this changes to "upg".
    5: You will see the boot logo displayed, then wait patiently and a "Firmware Update" menu is displayed.

    From here press the red key on the remote, it will then pop up with the firmware file on the USB drive, select this file and press "OK" on the remote, it will then ask "Do you want to update firmware" select yes and press "OK"

    Your receivers firmware will update and it will reboot.
    Dishes: Channel Master 1.2m 18" Actuator/Polar Mount IBU Single - Channel Master 1.2m Moteck H180 - Gibertini OP100L STAB HH100 IBU Twin - Zone 2 Quad LNB
    Receivers: Mutant HD51 - Edision Primo IP S2 - Minitiouner V2- Sony 55" 4K

  2. The Following 3 Users Say Thank You to RustySpoons For This Useful Post:

    jolatacqce (23-08-18),sathex (28-12-19),Sicilian (01-05-18)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.