Hi again!
Tried today openatv, and the same problem: no video. When I returned back to openvix 5.1.022 everything is ok again...
The problem is the same for me with any openvix image >5.1.022.
The same with my gigablue quad+.
maybe its a driver issue
regards
The Khan
i can confirm thisOriginally Posted by magnumkhan
It my well be a driver issue. Please confirm TV model, test with another set.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
My tv-set is a Samsung UE65MU6195.
If it helps.
ragards
Can you test on another display please?
Hi!
Tried today 5.1.031 but with the same result (quad). Menus are fine and audio but with No video. Tried it in on my Samsung UE65MU6195 and on a HPZR22W. Went back to 5.1.022 and everithing is fine again. Driver problems?
Have these video driver issues been resolved as I just upgraded to the latest Open Vix 5.1.0.32 today on a Gigablue quad with BCM7356 chipset. I have tried in on Lg and Hisense UHD tv with the same results....sound and menu but no picture. When I revert back to 5.1.0.22 all is fine
Like with any driver issues, you will need to contact them directly. The more that do, a quicker response you will get, hopefully.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
OK Thanks for the reply. I thought posting in the relevant Vix forum would produce a response from the development team or is there a different approach ?
No, drivers are purely down to the manufacturer of the receiver. I would email them directly and tell them your issues and hopefully they will respond.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Same here....just received my new GigaBlue UHD QUAD 4K yesterday. I updated to 5.1.031 and you get the black screen but are able to see menus. Revert to 5.1.022 and everything ok. I have a samsung OLED55E6V. I also have issues with HDMI CEC, with my old Technomate TM-NANO-3T Combo I could set it to go to standby when switching off the TV, applying the same settings using the Gigablue this does not happen.
Samsung don‘t make oled tv‘s I assume you mean LG???
I have giga 4K‘s (both ue & quad) and have none of these issues, so you need to play with the settings on both receiver and TV. If you are able to see menus on teh TV then try changing some of the Video settings and see what happens.
I assume you are directly connected to the TV???????
There was a driver change in April but nobody over here (where the majority of the giga‘s are installed) is screaming about any issues.
Last edited by twol; 27-07-18 at 18:39.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Samsung don’t do an OLED tv. Anyhow what are your display setting on your receiver? Are you using 1080 or 2160? Are you using Multi for Refresh rate?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
@Twol, he may mean the poor equivalent QLED. haha
But luckily I think it is an LG he has.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Sorry it is an LG do apologise. I have it set at 2160p refresh rate 50hz.
Last edited by dntaylor; 27-07-18 at 18:41.
Posting Permissions
Reply With Quote