Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: Mutant hd51 crashing

  1. #1

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts

    Mutant hd51 crashing

    Hi all.

    Fresh install of latest openvix is crashing.
    See crash logs

    Any idea of the reason?

    https://cloud.tapatalk.com/s/5aa95187c2a2d/crash.zip

    Sent from my Moto G (4) using Tapatalk

  2. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Do you have a USB tuner installed? Have you tried flashing and setting up without the USB tuner?
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  3. The Following User Says Thank You to Sicilian For This Useful Post:

    cargen (14-03-18)

  4. #3

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by Sicilian View Post
    Do you have a USB tuner installed? Have you tried flashing and setting up without the USB tuner?
    Yes, I have a usb dvb-t installed.
    I haven't tried without.
    For clarity, it doesn't creek all the time.
    It crashed twice, and now it seems fine.
    Just wondering if from the crash log it is clear what the reason is.

    Thanks

    Sent from my Moto G (4) using Tapatalk

  5. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Quote Originally Posted by cargen View Post
    Yes, I have a usb dvb-t installed.
    I haven't tried without.
    For clarity, it doesn't creek all the time.
    It crashed twice, and now it seems fine.
    Just wondering if from the crash log it is clear what the reason is.

    Thanks

    Sent from my Moto G (4) using Tapatalk
    One of the logs appears to implicate the vtuner that’s used for usb tuner.


    Sent from my iPhone using Tapatalk
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  6. The Following User Says Thank You to Sicilian For This Useful Post:

    cargen (14-03-18)

  7. #5

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by Sicilian View Post
    One of the logs appears to implicate the vtuner that’s used for usb tuner.


    Sent from my iPhone using Tapatalk
    Thanks

    Sent from my Moto G (4) using Tapatalk

  8. #6
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,771
    Thanks
    235
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by cargen View Post
    Hi all.

    Fresh install of latest openvix is crashing.
    See crash logs

    Any idea of the reason?

    https://cloud.tapatalk.com/s/5aa95187c2a2d/crash.zip
    The file system needs fixing, which might be causing the issue.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  9. #7
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,771
    Thanks
    235
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by Sicilian View Post
    One of the logs appears to implicate the vtuner that’s used for usb tuner.
    The rtl2823u is supposed to be working on kernels 4.6+ (and this is 4.10.12).
    EDIT: Sorry, that's (probably) the rtl2832p. The rtl2832u was working before then.
    Last edited by birdman; 14-03-18 at 21:21.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  10. #8

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by birdman View Post
    The file system needs fixing, which might be causing the issue.
    Which filesystem?
    Not sure It was just installed from scratch

    Sent from my Moto G (4) using Tapatalk

  11. #9
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,771
    Thanks
    235
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by cargen View Post
    Which filesystem?
    This one.

    Code:
    <4>[    1.618116] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
    ....
    <5>[  332.768410] EXT4-fs (mmcblk0p3): error count since last fsck: 2
    <5>[  332.774427] EXT4-fs (mmcblk0p3): initial error at time 1521044440: ext4_mb_generate_buddy:758
    <5>[  332.783019] EXT4-fs (mmcblk0p3): last error at time 1521044440: ext4_mb_generate_buddy:758
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  12. #10

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by birdman View Post
    This one.

    Code:
    [    1.618116] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
    ....
    [  332.768410] EXT4-fs (mmcblk0p3): error count since last fsck: 2
    [  332.774427] EXT4-fs (mmcblk0p3): initial error at time 1521044440: ext4_mb_generate_buddy:758
    [  332.783019] EXT4-fs (mmcblk0p3): last error at time 1521044440: ext4_mb_generate_buddy:758
    I don't have any filesystem with this name.
    I am a bit lost

    Code:
    root@mutant51:~# df -h
    Filesystem                Size      Used Available Use% Mounted on
    /dev/root               766.8M    229.8M    493.0M  32% /
    devtmpfs                185.8M      4.0K    185.8M   0% /dev
    tmpfs                    64.0K         0     64.0K   0% /media
    /dev/mmcblk0p1            3.0M     10.0K      3.0M   0% /boot
    tmpfs                   502.0M    952.0K    501.1M   0% /var/volatile
    /dev/sda1               111.3G    127.2M    111.1G   0% /media/hdd
    Sent from my Moto G (4) using Tapatalk


    Adding dmesg output as well.

    Code:
    Trying 192.168.178.29...
    Connected to 192.168.178.29.
    Escape character is '^]'.
    
    Welcome to OpenViX for mutant51
    openvix 5.1 mutant51
    
    mutant51 login: root
    Last login: Thu Mar 15 05:35:56 GMT 2018 on pts/0
    root@mutant51:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 4.10.12 (vix@ns3044876.ip-51-255-93.eu) (gcc version 6.3.0 (GCC) ) #1 SMP Sun Nov 19 23:45:55 GMT 2017
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
    [    0.000000] CPU: div instructions available: patching division code
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] OF: fdt:Machine model: BCM97251SSV
    [    0.000000] cma: Reserved 440 MiB at 0x0000000014800000
    [    0.000000] cma: Reserved 192 MiB at 0x0000000030000000
    [    0.000000] cma: Failed to reserve 440 MiB
    [    0.000000] cma: Failed to reserve 192 MiB
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 262144
    [    0.000000] free_area_init_node: node 0, pgdat c0924b80, node_mem_map d3e1c000
    [    0.000000]   Normal zone: 1728 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 196608 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
    [    0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
    [    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
    [    0.000000] Kernel command line: brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[    0.000000] Memory: 380552K/1048576K available (6677K kernel code, 364K rwdata, 1824K rodata, 340K init, 217K bss, 20856K reserved, 647168K cma-reserved, 65536K highmem)
    [    0.000000] Virtual kernel memory layout:
                       vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                       fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                       vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                       lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                       pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                       modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                         .text : 0xc0008000 - 0xc068db00   (6679 kB)
                         .init : 0xc0885000 - 0xc08da000   ( 340 kB)
                         .data : 0xc08da000 - 0xc0935378   ( 365 kB)
                          .bss : 0xc0937000 - 0xc096d434   ( 218 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]   Build-time adjustment of leaf fanout to 32.
    [    0.000000]   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
    [    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
    [    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
    [    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
    [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
    [    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
    [    0.000011] Switching to timer-based delay loop, resolution 37ns
    [    0.000300] Console: colour dummy device 80x30
    [    0.000319] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000329] pid_max: default: 32768 minimum: 301
    [    0.000439] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000446] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000904] CPU: Testing write buffer coherency: ok
    [    0.001156] CPU0: update cpu_capacity 1024
    [    0.001163] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.001372] Setting up static identity map for 0x8440 - 0x8498
    [    0.003407] smp: Bringing up secondary CPUs ...
    [    0.004130] CPU1: update cpu_capacity 1024
    [    0.004133] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.004195] smp: Brought up 1 node, 2 CPUs
    [    0.004206] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.004212] CPU: All CPU(s) started in SVC mode.
    [    0.004605] devtmpfs: initialized
    [    0.011118] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.011313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
    [    0.011334] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.025270] NET: Registered protocol family 16
    [    0.025745] DMA: preallocated 256 KiB pool for atomic coherent allocations[    0.031409] cpuidle: using governor ladder
    [    0.035368] cpuidle: using governor menu
    [    0.043897] No ATAGs?
    [    0.044588] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    [    0.044599] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.059634] SCSI subsystem initialized
    [    0.060002] libata version 3.00 loaded.
    [    0.060229] usbcore: registered new interface driver usbfs
    [    0.060277] usbcore: registered new interface driver hub
    [    0.060323] usbcore: registered new device driver usb
    [    0.060374] Linux cec interface: v0.10
    [    0.060409] Linux video capture interface: v2.00
    [    0.060466] pps_core: LinuxPPS API ver. 1 registered
    [    0.060470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.060487] PTP clock support registered
    [    0.061122] Advanced Linux Sound Architecture Driver Initialized.
    [    0.062486] clocksource: Switched to clocksource arch_sys_counter
    [    0.062759] FS-Cache: Loaded
    [    0.068978] NET: Registered protocol family 2
    [    0.069361] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.069401] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.069474] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.069560] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.069585] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.069695] NET: Registered protocol family 1
    [    0.070158] RPC: Registered named UNIX socket transport module.
    [    0.070164] RPC: Registered udp transport module.
    [    0.070167] RPC: Registered tcp transport module.
    [    0.070171] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.070179] PCI: CLS 0 bytes, default 64
    [    0.070543] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
    [    0.071864] workingset: timestamp_bits=14 max_order=18 bucket_order=4
    [    0.072500] FS-Cache: Netfs 'nfs' registered for caching
    [    0.072629] NFS: Registering the id_resolver key type
    [    0.072648] Key type id_resolver registered
    [    0.072652] Key type id_legacy registered
    [    0.072665] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.072669] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    0.072839] FS-Cache: Netfs 'cifs' registered for caching
    [    0.072892] Key type cifs.spnego registered
    [    0.073031] fuse init (API version 7.26)
    [    0.074928] bounce: pool size: 64 pages
    [    0.074974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.074982] io scheduler noop registered
    [    0.074988] io scheduler deadline registered
    [    0.075018] io scheduler cfq registered (default)
    [    0.075294] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
    [    0.075600] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
    [    0.076030] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
    [    0.076623] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
    [    0.077140] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
    [    0.111973] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.113552] console [ttyS0] disabled
    [    0.113591] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
    [    0.822843] console [ttyS0] enabled
    [    0.826908] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
    [    0.836247] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
    [    0.852549] brd: module loaded
    [    0.859387] loop: module loaded
    [    0.863379] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
    [    0.872556] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
    [    0.878630] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
    [    0.895868] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
    [    0.904849] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
    [    0.913994] scsi host0: brcm-ahci
    [    0.917591] scsi host1: brcm-ahci
    [    0.921077] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
    [    0.929009] ata2: DUMMY
    [    0.931469] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
    [    0.938616] libphy: Fixed MDIO Bus: probed
    [    0.943042] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.960829] libphy: bcmgenet MII bus: probed
    [    0.987803] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    [    0.993656] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    [    1.017608] ehci-brcm: EHCI BRCM driver
    [    1.021573] ehci-brcm f0470300.ehci: EHCI Host Controller
    [    1.027008] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
    [    1.044711] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
    [    1.056832] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
    [    1.063301] hub 1-0:1.0: USB hub found
    [    1.067092] hub 1-0:1.0: 1 port detected
    [    1.071295] ehci-brcm f0470500.ehci: EHCI Host Controller
    [    1.076724] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
    [    1.094412] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
    [    1.106833] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
    [    1.113208] hub 2-0:1.0: USB hub found
    [    1.116991] hub 2-0:1.0: 1 port detected
    [    1.121119] ohci-brcm: OHCI BRCM driver
    [    1.125123] ohci-brcm f0470400.ohci: BRCM OHCI controller
    [    1.130550] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
    [    1.138195] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
    [    1.200229] hub 3-0:1.0: USB hub found
    [    1.204018] hub 3-0:1.0: 1 port detected
    [    1.208169] ohci-brcm f0470600.ohci: BRCM OHCI controller
    [    1.208847] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.219790] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
    [    1.220284] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [    1.220287] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.230236] ata1.00: configured for UDMA/133
    [    1.230600] scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.22 PQ: 0 ANSI: 5
    [    1.252323] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
    [    1.272521] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
    [    1.280098] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.285501] sd 0:0:0:0: [sda] Write Protect is off
    [    1.290319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.290442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.302862]  sda: sda1
    [    1.306084] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.314424] hub 4-0:1.0: USB hub found
    [    1.318225] hub 4-0:1.0: 1 port detected
    [    1.322389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.328958] ehci-pci: EHCI PCI platform driver
    [    1.333479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.339684] ohci-pci: OHCI PCI platform driver
    [    1.344598] xhci-hcd f0471000.xhci: xHCI Host Controller
    [    1.349947] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
    [    1.357676] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
    [    1.366251] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
    [    1.372745] hub 5-0:1.0: USB hub found
    [    1.376541] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    1.383805] xhci-hcd f0471000.xhci: xHCI Host Controller
    [    1.389140] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
    [    1.396684] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
    [    1.405172] hub 6-0:1.0: USB hub found
    [    1.408961] hub 6-0:1.0: 2 ports detected
    [    1.413287] usbcore: registered new interface driver uas
    [    1.418701] usbcore: registered new interface driver usb-storage
    [    1.424804] usb 1-1: new high-speed USB device number 2 using ehci-brcm
    [    1.431625] mousedev: PS/2 mouse device common for all mice
    [    1.437477] i2c /dev entries driver
    [    1.441269] IR NEC protocol handler initialized
    [    1.445821] IR RC5(x/sz) protocol handler initialized
    [    1.450884] IR RC6 protocol handler initialized
    [    1.455447] IR JVC protocol handler initialized
    [    1.459987] IR Sony protocol handler initialized
    [    1.464617] IR SANYO protocol handler initialized
    [    1.469334] IR Sharp protocol handler initialized
    [    1.474050] IR MCE Keyboard/mouse protocol handler initialized
    [    1.479894] IR XMP protocol handler initialized
    [    1.484434] smssdio: Siano SMS1xxx SDIO driver
    [    1.488886] smssdio: Copyright Pierre Ossman
    [    1.493546] sdhci: Secure Digital Host Controller Interface driver
    [    1.499740] sdhci: Copyright(c) Pierre Ossman
    [    1.504105] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.513258] hub 1-1:1.0: USB hub found
    [    1.517181] hub 1-1:1.0: 4 ports detected
    [    1.542837] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    1.550434] hidraw: raw HID events driver (C) Jiri Kosina
    [    1.556036] usbcore: registered new interface driver usbhid
    [    1.561630] usbhid: USB HID core driver
    [    1.568089] NET: Registered protocol family 17
    [    1.572614] Key type dns_resolver registered
    [    1.577014] ThumbEE CPU extension supported.
    [    1.581303] Registering SWP/SWPB emulation handler
    [    1.593656] ALSA device list:
    [    1.596661]   No soundcards found.
    [    1.600649] Waiting for root device /dev/mmcblk0p3...
    [    1.689900] mmc0: new high speed MMC card at address 0001
    [    1.695696] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
    [    1.700387] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
    [    1.706464] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
    [    1.712527] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
    [    1.721794] Alternate GPT is invalid, using primary GPT.
    [    1.727156]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
    [    1.735317] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
    [    1.746301] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
    [    1.758779] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [    1.766942] VFS: Mounted root (ext4 filesystem) on device 179:3.
    [    1.773712] devtmpfs: mounted
    [    1.777095] Freeing unused kernel memory: 340K
    [    1.781553] This architecture does not have kernel memory protection.
    [    1.807849] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
    [    1.854196] random: fast init done
    [    1.908873] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
    [    2.048496] Adding 502780k swap on /dev/mmcblk0p10.  Priority:-1 extents:1 across:502780k SS
    [    2.700499] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    2.859286] hd51_1: module_layout: kernel tainted.
    [    2.864114] Disabling lock debugging due to kernel taint
    [    2.869444] hd51_1: loading out-of-tree module taints kernel.
    [    2.876566] usbcore: registered new interface driver tpm
    [    8.515505] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    8.526156] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    8.682444] dvbdev: DVB: registering new adapter (dvb0)
    [    8.690654] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
    [    8.709858] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
    [    8.969593] input: front panel as /devices/virtual/input/input2
    [    8.992728] Registered IR keymap rc-cec
    [    8.996900] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
    [    9.007118] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
    [    9.103860] SGI XFS with security attributes, realtime, no debug enabled
    [    9.429962] usb 1-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
    [    9.501240] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
    [    9.510931] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
    [    9.528066] i2c i2c-8: Added multiplexed i2c bus 9
    [    9.532931] rtl2832 8-0010: Realtek RTL2832 successfully attached
    [    9.539107] usb 1-1.3: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
    [    9.555280] r820t 9-001a: creating new instance
    [    9.569735] r820t 9-001a: Rafael Micro r820t successfully identified
    [    9.595896] Registered IR keymap rc-empty
    [    9.600160] input: Realtek RTL2832U reference design as /devices/platform/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1/input4
    [    9.613555] rc rc1: Realtek RTL2832U reference design as /devices/platform/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1
    [    9.626445] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input5
    [    9.635401] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs
    [    9.654853] usb 1-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
    [    9.665022] usbcore: registered new interface driver dvb_usb_rtl28xxu
    [    9.695089] usbcore: registered new interface driver cdc_acm
    [    9.700804] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [    9.825591] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
    [   11.138889] NET: Registered protocol family 10
    [   11.144654] Segment Routing with IPv6
    [   11.317835] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   11.327317] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    [   11.334579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.971242] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
    [   13.979487] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   24.201846] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
    [   24.642313] random: crng init done
    [  332.618616] EXT4-fs (mmcblk0p3): error count since last fsck: 2
    [  332.624577] EXT4-fs (mmcblk0p3): initial error at time 1521044440: ext4_mb_generate_buddy:758
    [  332.633123] EXT4-fs (mmcblk0p3): last error at time 1521044440: ext4_mb_generate_buddy:758
    root@mutant51:~#
    Last edited by cargen; 15-03-18 at 06:44.

  13. #11
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    The HD51 has 4 multiboot partitions, it's having issues with one of them.

    Maybe this thread will help...

    http://www.world-of-satellite.com/sh...hd51+multiboot
    Last edited by ccs; 15-03-18 at 10:36.

  14. #12

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by ccs View Post
    The HD51 has 4 multiboot partitions, it's having issues with one of them.

    Maybe this thread will help...

    http://www.world-of-satellite.com/sh...hd51+multiboot
    Thanks.
    I an even more confused now .

    Probably not skilled enough to understand.

    I have run the command findmnt -l and it look the main / partition has the problem and reflashing doesn't fix it.

    Is this an hardware problem?
    How can I fix it?

    The box is brand new. Arrived on Monday.


    Code:
     
    Trying 192.168.178.29...
    Connected to 192.168.178.29.
    Escape character is '^]'.
    
    Welcome to OpenViX for mutant51
    openvix 5.1 mutant51
    
    mutant51 login: root
    Last login: Thu Mar 15 05:43:12 GMT 2018 on pts/0
    root@mutant51:~# findmnt -l
    TARGET        SOURCE         FSTYPE OPTIONS
    /             /dev/mmcblk0p3 ext4   rw,relatime,data=ordered
    /dev          devtmpfs       devtmp rw,relatime,size=190276k,nr_inodes=47569,/proc         proc           proc   rw,relatime
    /sys          sysfs          sysfs  rw,relatime
    /sys/kernel/debug
                  debugfs        debugf rw,relatime
    /media        tmpfs          tmpfs  rw,relatime,size=64k
    /boot         /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepag/var/volatile tmpfs          tmpfs  rw,relatime
    /media/hdd    /dev/sda1      ext4   rw,relatime,data=ordered
    /dev/pts      devpts         devpts rw,relatime,gid=5,mode=620,ptmxmode=000
    /media/autofs /etc/auto.network
                                 autofs rw,relatime,fd=6,pgrp=1952,timeout=5,minproot@mutant51:~#
    Sent from my Moto G (4) using Tapatalk

  15. #13

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    hi All,

    some update on my problem.

    i discovered the problem with the filesystem error is the Kodi plugin.
    i did a fresh install again with no errors.
    i installed one by one the following plugins with a reboot between each install.
    1. Oscam-emu
    2. rtl2832u drivers
    3. Kodi



    after the installation of Kodi, bang!! the error is there.

    installed everything again without Kodi and no errors anymore

    a bit disappointing, as the reason of buying the box is the compatibility with Kodi.
    may i ask to someone with the same box if you can try to replicate the error?

    Thanks again for the support.


    Code:
    <4>[    1.618116] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
    ....
    <5>[  332.768410] EXT4-fs (mmcblk0p3): error count since last fsck: 2
    <5>[  332.774427] EXT4-fs (mmcblk0p3): initial error at time 1521044440: ext4_mb_generate_buddy:758
    <5>[  332.783019] EXT4-fs (mmcblk0p3): last error at time 1521044440: ext4_mb_generate_buddy:758

  16. #14
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Your storage device SDA1, is it formatted with the receiver ext4?


    Sent from my iPhone using Tapatalk
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  17. #15

    Title
    Senior Member
    Join Date
    Jul 2013
    Posts
    105
    Thanks
    34
    Thanked 17 Times in 11 Posts
    Quote Originally Posted by Sicilian View Post
    Your storage device SDA1, is it formatted with the receiver ext4?


    Sent from my iPhone using Tapatalk
    I think so.
    I can give it another formatting to see if changes anything and let you know

    Sent from my Moto G (4) using Tapatalk

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.