Evening all.
Took delivery late last week of the above and a dish/lnb from W of S, but with the weather and work getting in the way have not had chance to install, maybe a good thing as I'm having problems with the motor, rung W of S this aft for some technical advice but was told to come on here and raise a ticket, before that I thought I'd ask in here.
So dusted down the vu solo2 and installed the latest Vix image.
Made up a short cable for connection to lnb/motor. Used this to connect to the box just to get a feel of the positioner setup.
Go into tuner config and set tuner A as simple/positioner and input my long/lat. Set tuner B as not configured.
Red and green leds flashing on the motor, motor at 0' on scale so all good.
Go to Positioner Setup, set Goto to 28.2 and press yellow button, motor moves but not to 28.2 according to the scale, checked the led display and nothing [not as inteligent as I thought]
With a brief press of either the east/west buttons the led read 32.6
Tried this numerous times with different sats but always the same result -
42e get 47.5
28.2 - 32.6
19.2 - 22.7
16 - 19.1
30w get 31.6
45 - 47.9
Used the Goto0 quite a few times and this is spot on.
Then downloaded Vhannibles settings from the plugins but the results were the same.
Any help guys and thanks for reading.