Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 7 of 7

Thread: Setup 23.5°E, 19.2°E, 13°E with DiSEqC 2.0 switch S4/1PCN-W1 running OpenViX

  1. #1

    Title
    Junior Member
    Join Date
    Dec 2017
    Posts
    10
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Setup 23.5°E, 19.2°E, 13°E with DiSEqC 2.0 switch S4/1PCN-W1 running OpenViX

    I would like to set up Ultimo4K with latest OpenViX on it with 1 in-feed that has DiSEqC 2.0 switch S4/1PCN-W1 and 3 LBN's pointing to 23.5°E, 19.2°E, 13°E.

    The recommended setup for Sky UK worked great with AutoBouquetsMaker,
    but the "AutoBouquetsMaker" is only limited to few satelites and 23.5°E, 19.2°E, 13°E are not there ...
    VU+ Ultimo4K for Freeview and Freesat UK
    OE-Alliance 4.1 / OpenViX 5.1.006 (2017-12-20) / 3.14.28 / 20171219
    ViX-Night-HD SKIN

    1 X Cable DVB-C FBC Tuner - UNused at the mo
    1 X Twin Satellite DVB-S/S2 FBC Tuner
    1 X Twin Hybrid DVB-C/T/T2 Tuner

  2. #2
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    AutoBouquetsMaker (ABM) does not "scan" satellites, it "scans" providers. It will only offer you the providers that you can receive. It checks your tuner configuration and does not show the ones you cannot receive.

  3. #3

    Title
    Junior Member
    Join Date
    Dec 2017
    Posts
    10
    Thanks
    2
    Thanked 0 Times in 0 Posts
    I see, so forgot to set-up the tuner .......



    My settings are switch S4/1PCN-W1:
    Port A: 19.2E Astra 1KR/1L/1M/1N
    Port B: 23.5E Astra 3B
    Port C: 13.0E Eutelsat Hot Bird 13B/13C/13E


    So I have setup in: 1 Setup - 2 Tuner config - 1 Tuner setup - Tuner I Vuplus DVB-S NIM (45208 FBC) (DVB-S2):

    Configuration mode: simple
    Mode: DiSEqC A/B/C/D
    Port A: 19.2E Astra 1KR/1L/1M/1N
    Port B: 23.5E Astra 3B
    Port C: 13.0E Eutelsat Hot Bird 13B/13C/13E
    Port D: nothing connected
    Set voltage and 22KHz: yes
    Send DiSEqC only on satellite change: yes
    Force Legacy Signal Stats: yes
    [green] to Save

    Then go to: 1 Setup - 2 Tuner config - 1 Tuner setup - 7 Signal finder
    Tuner: Tuner I Vuplus DVB-S NIM (45208 FBC) (DVB-S2)

    Satelite: 19.2E Astra 1KR/1L/1M/1N
    Tune: predefined transponder
    Transponder: 10714 H 22000 2/3
    Scan: will find 6 channels, Mainfranken HD, Franken Fernsehen HD, TVA-OTA HD, ..........


    So change to:
    Satellite: 23.5E Astra 3B
    Tune: predefined transponder
    Transponder: 11644 H 5500 3/4
    Scan: will find 60 channels 2040 - ESKA Gorzow, 2050 ESKA Kielce .....


    Then change to
    Satellite: 13.0E Eutelsat Hot Bird 13B/13C/13E
    Tune: predefined transponder
    Transponder: 10719 V 27000 3/4
    And nothing ........ I can not get the Ultimo4K to tune to 13.0E Eutelsat Hot Bird on port C or (IN3) on switch .....



    I am using DiSEqC 2.0 4x1 weatherproof switch S4/1PCN-W1 from:
    https://www.ebay.com/itm/DiSEqC-2-0-...-/251777994505
    VU+ Ultimo4K for Freeview and Freesat UK
    OE-Alliance 4.1 / OpenViX 5.1.006 (2017-12-20) / 3.14.28 / 20171219
    ViX-Night-HD SKIN

    1 X Cable DVB-C FBC Tuner - UNused at the mo
    1 X Twin Satellite DVB-S/S2 FBC Tuner
    1 X Twin Hybrid DVB-C/T/T2 Tuner

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Do you want to scan the three satellites?

  5. #5

    Title
    Junior Member
    Join Date
    Dec 2017
    Posts
    10
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Yes, all at once.

    Or should I scan them individually?
    VU+ Ultimo4K for Freeview and Freesat UK
    OE-Alliance 4.1 / OpenViX 5.1.006 (2017-12-20) / 3.14.28 / 20171219
    ViX-Night-HD SKIN

    1 X Cable DVB-C FBC Tuner - UNused at the mo
    1 X Twin Satellite DVB-S/S2 FBC Tuner
    1 X Twin Hybrid DVB-C/T/T2 Tuner

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Always best to say what you want to do/achieve as well as what you are doing.

    In manual scan, select the tuner that is configured/set to receive the satellites you want to scan.

    Type of scan: multisat.

    Enable the sats you want to scan. Press Green when ready.

  7. #7

    Title
    Junior Member
    Join Date
    Dec 2017
    Posts
    10
    Thanks
    2
    Thanked 0 Times in 0 Posts
    [SOLVED]


    I have restored settings to default, then set the tuners and ports again for the switch and all working now.
    VU+ Ultimo4K for Freeview and Freesat UK
    OE-Alliance 4.1 / OpenViX 5.1.006 (2017-12-20) / 3.14.28 / 20171219
    ViX-Night-HD SKIN

    1 X Cable DVB-C FBC Tuner - UNused at the mo
    1 X Twin Satellite DVB-S/S2 FBC Tuner
    1 X Twin Hybrid DVB-C/T/T2 Tuner

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.