Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Unable to Flash New Image to TM-TWIN-4K

  1. #1

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Unable to Flash New Image to TM-TWIN-4K

    I attempted to flash the new Vix Image 5.2.002, first disconnecting my USB attached HDD (storage), and using a formatted FAT32 8GB stick and following the recommended procedure(***see last lines). It was impossible to get the box to boot itself from the USB stick. After several attempts I decided to use Image Manager to restore an Image from the USB stick. This could not be achieved either.
    I am thinking there is a bug somewhere, so tried the following:-
    Re initialised the USB stick in Setup> Storage > Initialise:
    Created fresh backups in Backup Manager and Image Manager.
    Viewed the newly created backups using "list".
    Both the .gz (system backup) and the .zip (image backup) were listed in /media/sda1/ which I assume is the USB stick.
    I then attempted to restore both these files using Image Manager and Backup Manager respectively.
    Image Manager showed the .zip Image backup file in /media/sda1 however the Restore button was not enabled. For this screen, the VIX Manual v1.1 text states the yellow button = Restore, whilst the image shows blue = Restore and Yellow = Download. On my box Yellow button = Download and Blue button is not enabled. With .zip Image selected, neither the Blue button, nor OK has any effect. The MENU button shows a blank SETUP screen which is empty with Red/Green as Cancel and Save.
    Likewise it is impossible to do a Restore from the .gz system file within Backup Manager.

    Am I right in thinking Flashing a .zip image by booting from the USB stick is the same as Restoring a .zip image within Image Manager? Then if I solve the inability to Restore my existing System and Image files from the backups I created, I no need to worry why the box will not boot from the usb stick. I would simply place VIX 5.2.002 .zip file onto the newly formatted USB stick and use Image Manager.
    (***) I did read the "How to Flash to TM-TWIN-4K.pdf" which advises to unzip the download and place the entire contents in root of USB stick. I did try this initially, which created /update/tmtwin4k/xxxxx files (5 totally).
    I also tried placing the .zip file in root of usb stick, and the five xxxxx files themselves in usb stick root. Then I tried the same copying to usb stick \update\. None of these worked either.

    Meanwhile the box is working fine on my out-of-the-box version 5.1.032
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  2. #2
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    If you initialise a USB stuck using the receiver, it won't be in fat32, in will be in ext4.

  3. #3

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Right. I did try with FAT32 format in the very first attempts. After trying every way to noot from stick, and Restoring former backups when even then there is no Restore Buttom enabled. what should I do? Well, I tried with the Initialise proceddure and repeated it all again. I can imagine you may need a FAT32 stick to boot a .BIN file, but why does Restore not work?
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  4. #4
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts

    Unable to Flash New Image to TM-TWIN-4K

    Quote Originally Posted by Midori View Post
    Right. I did try with FAT32 format in the very first attempts. After trying every way to noot from stick, and Restoring former backups when even then there is no Restore Buttom enabled. what should I do? Well, I tried with the Initialise proceddure and repeated it all again. I can imagine you may need a FAT32 stick to boot a .BIN file, but why does Restore not work?
    You can’t “Couch Flash” (Image Manager) with ViX on ARM receivers (4K). Look at this as this might help you >> Automatic full backup by Dimtrij
    https://r.tapatalk.com/shareLink?sha...0&share_type=t


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  5. #5
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Using Image Manager to flash/restore images on Arm CPU/SOC receivers is disabled. There is a long thread in the solo 4k section.

    You can use this plugin to do it though
    http://www.world-of-satellite.com/sh...kup-by-Dimtrij

  6. #6

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Phew ! Both this last two suggestions are way way over my head. I will have to stick with original Vix version by the sounds of it.
    But tell me what theis does not work for me? Before trying alternatives, all I did was to follow what it said here
    http://www.world-of-satellite.com/sh...ate-TM-Twin-4K
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  7. #7
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by Midori View Post
    Phew ! Both this last two suggestions are way way over my head. I will have to stick with original Vix version by the sounds of it.
    But tell me what theis does not work for me? Before trying alternatives, all I did was to follow what it said here
    http://www.world-of-satellite.com/sh...ate-TM-Twin-4K
    What make of usb flash drives are you using? What size? Have you tried more than just the one usb flash drive? No other usb device are present while you are attempting to flash the receiver?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  8. #8

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    I have Lexar, Integral and two other USB sticks.
    8 GB and smaller
    I tried only Lexar. Have you tested with any other drives otyher than the one WOS sells?
    As satted, I "first disconnecting my USB attached HDD (storage)"
    No other usb device are present while attempting to flash the receiver.

    The Vix manual says....
    8.2.2.2.2 Flashing via image manager
    Menu  Setup  System  VIX  Image manager 
    In the image manager you find all images you have previously backed up. You can also add files manually to the same folder.
    The yellow button allows you to download VIX-images directly from the WoS-server:

    The downloaded image will appear in the main screen of the image manager.
    For the actual flashing of any image: select the desired one and press the blue button and say ‘yes’ to the question if you actually want to flash that image. This highly convenient way of flashing is also called ‘couch flashing’.


    Should work either way as documented, but you say can’t “Couch Flash” (Image Manager)". Is "couch flash" = Restore? Is there an update to the Vix manual, or is it Technomate in paperwork?
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  9. #9
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts
    Vix manual has not been updated for a while.

    "Couch flash" = flash/install an image using Image Manager

  10. #10
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    I use Kingston and HP without issues. My HP ones are 16gb and work fine. I have also used 16gb & 64gb Kingston ones without issues.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  11. #11
    thecaretaker's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Apr 2012
    Location
    Southern UK
    Posts
    295
    Thanks
    125
    Thanked 130 Times in 72 Posts
    Quote Originally Posted by Midori View Post
    Re initialised the USB stick in Setup> Storage > Initialise:
    Created fresh backups in Backup Manager and Image Manager.
    Viewed the newly created backups using "list".
    Both the .gz (system backup) and the .zip (image backup) were listed in /media/sda1/ which I assume is the USB stick.
    I then attempted to restore both...
    Did you unzip the image backup on the usb stick first? You need to ensure the correct folder structure for the box to recognise it. That applies to my VU box, sure it is the same for the TM.
    VU+ Duo 4K SE

  12. #12

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by thecaretaker View Post
    Did you unzip the image backup on the usb stick first? You need to ensure the correct folder structure for the box to recognise it. That applies to my VU box, sure it is the same for the TM.
    This morning I went back to square one, reformated USB stick FAT32 and this time I unzipped the Image package directly onto the USB stick. (previously I unzipped the Image package to my PC then used MSExplorer to copy onto USB stick).
    For the first time I got the "onscreen message" indicating that the USB stick was being read and with a prompt to hit the on/off button. (previously there was no prompt message).
    After a minute or two the Vix setup wizard was called and after that process 'About' shows ver 5.0.032 has been replaced with 5.1.002.

    So good news thus far. I now need to find and recover/restore my System Settings (Backup as Vix call it) to get the box back into service.

    First need to recover possession of the TV from the second user !
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  13. #13

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    System Settings now completely recovered using Backup manager and all fine working now, though Restore of Image .zip via Image Manager is still disabled.

    Thanks to everyone who gave advice !
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

  14. #14
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    The Flash via Image Manager will never be Enabled for any ARM receivers. Try learning the alternative method shown in posts #4 & #5.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  15. #15

    Title
    Junior Member
    Join Date
    Oct 2017
    Location
    Buckinghamshire, UK
    Posts
    14
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Andy_Hazza View Post
    The Flash via Image Manager will never be Enabled for any ARM receivers. Try learning the alternative method shown in posts #4 & #5.
    Yes, I am in the learning process with installing and using this new extension. I am trying to create a backup and then restore it. After an automated backup completed, when pressing MANUAL > Console I get the following message:-
    Backup Message.jpg

    Does this mean a backup has been created successfully? I ask, because when I attempt to Restore, there is no backup file visible.
    If I FTP to /media/hdd then there is no /bi folder.
    If I FTP to /dev there is no /sda1 folder.
    TM-TWIN-4K Enigma2 + OpenVix 5.1.002 + external USB3 HDD
    Dish 60 x 70cm eliptical; 3xDual LNB +1xQuad LNB; 2x4 way DiSEqC
    Satellites: 28.2E, 19.2E. 13.0E, 4th LNB unfocused.
    TV - Samsung SUHD K8000 4K (tuner direct fed from one of spare Quad ports)
    Megasat 1HD satmeter

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.