Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 5 of 5

Thread: OpenVix 3.2 HDMI-CEC working?

  1. #1

    Title
    Junior Member
    Join Date
    Aug 2016
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts

    OpenVix 3.2 HDMI-CEC working?

    Hi.
    I'm struggling to get my old gb800se to work with my old SAMSUNG TV via cec.
    I'm intrested in manipulating these devices with only one remote (the recievers)
    I'm currently on an openatv 6.0 image , but CEC seems to be dead. I have activated it in the menu, but it doesn't wake up my tv, nor does it change it to the correct hdmi input once I press power on the gb800se's remote.
    My tv detect's "tunner" as hdmi-cec device but it fails to connect to it (I guess this is for a reverse opperation - in order to control the box with the tv's remote - so not really interested in this.
    I was wondering if Openvix 3.2 037 Release has working HDMI-CEC.

    Thanks in advance.

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Have you inputted your tv code into the receivers remote?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  3. #3

    Title
    Junior Member
    Join Date
    Aug 2016
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    How do I do that?
    I don't think Gigablue 800 SE is compatible with that method, I am talking about HDMI CEC...

  4. #4
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts

    OpenVix 3.2 HDMI-CEC working?

    I’’ am more familiar with Vu+ receivers that allow you to program the remote with a TV code.


    Sent from my iPhone using Tapatalk
    Last edited by Andy_Hazza; 20-11-17 at 17:18.
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  5. #5
    sundancer's Avatar
    Title
    Member
    Join Date
    Sep 2017
    Posts
    75
    Thanks
    10
    Thanked 27 Times in 16 Posts
    Check the cable bud. My LG TV would ignore CEC commands from my ET8500 until i changed the HDMI cable. Works fine now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.