Results 1 to 1 of 1
  1. #1
    Senior Member

    Join Date
    Dec 2012
    Thanked 30 Times in 20 Posts

    [HOW-TO] View CCTV Feed on Enigma2

    I got a IP camera model dahua PC-HDW4431C-A but should work with any camera that supports RTSP.

    This a guide how to add the feed to an Enigma2 device. I will be adding the stream to the Favourites Bouquets, but you can add it to whatever bouquet you want.

    1. first of all find the RTSP port that your IP camera uses. On Dahua cameras go to network connection.

    The RTSP port my camera uses is 554.

    2. test the RTSP stream. Open VLC player. Media>Open Network Stream...
    enter the line below replacing username, password, ipcameraIP and RTSP-PORT with your own..


    you can also just enter rtsp://cameraIP and it will ask you for your camera credentials if you have default RTSP settings.

    here is my line
    now if the stream doesnt work go back and confirm you entered everything correctly and try another stream. i was unable to get the main stream 0 to work.

    URL Syntax


    ID: a valid user?s username.
    PASS:user?s password. (Cannot contain #)
    IP:the IP address of the IP Camera.
    RTSP:the default port is 554. It can be omitted.
    &:the channel number. It starts from 1.
    *:the stream type. The of main stream is 0, extra stream 1 is 1, extra stream 2 is 2.

    if you can view the live stream then continue to the next step.

    3.NOTE: I will be adding the stream to the Favourites Bouquets, but you can add it to whatever bouquet you want.

    ftp into your enigma2 device and go to /etc/enigma2. find and open the file

    4. Now add your camera's RTSP stream like below to the "" file, again replacing username, password, ipcameraIP and RTSP-port with your own.. This time you also have to replace any colon “:” in the RTSP link you used in VLC player with %3a

    Heres an example

    #SERVICE 4097:0:0:0:0:0:0:0:0:0:rtsp%3a//username%3apassword@cameraIP%3aRTSP-PORT/cam/realmonitor?channel=1&subtype=1

    My link:

    #SERVICE 4097:0:0:0:0:0:0:0:0:0:rtsp%3a//admin%3apassword@

    5. Reboot enigma on your device.
    You can do this via CLI with the command below or via the GUI
    killall -9 enigma2
    6. Watch the live feed.
    Please note you will not be able to record, Pan, tilt or zoom

    I can confirm this will work remotely if you open the RTSP port and configure a DDNS such as NO-IP so instead of entering your IP address you must enter the domain name

    also i can view the main channel now. using the code below
    #SERVICE 4097:0:0:0:0:0:0:0:0:0:rtsp%3a//admin%3apassword0@

    you can see all you have to do is change the subtype to 0.
    Last edited by Alankellyeire; 06-08-17 at 21:57.

  2. The Following 5 Users Say Thank You to Alankellyeire For This Useful Post:

    amarjit_dhillon (07-06-18),bassethound (11-01-18),el bandido (06-08-17),qwerty875 (04-04-18),Willo3092 (07-01-18)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts