Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: Clonezilla Live CD

  1. #1
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    Clonezilla Live CD

    Clonezilla Live is a Debian-based live CD containing Clonezilla, a partition and disk cloning software similar to Norton Ghost. It saves and restores only used blocks in hard drive. With Clonezilla, one can clone a 5 GB system to 40 clients in about 10 minutes.

    -----------------------

    What is Clonezilla?
    You're probably familiar with the popular proprietary commercial package Norton Ghost®. The problem with these kind of software packages is that it takes a lot of time to massively clone systems to many computers. You've probably also heard of Symantec's solution to this problem, Symantec Ghost Corporate Edition® with multicasting. Well, now there is an OpenSource clone system (OCS) solution called Clonezilla with unicasting and multicasting!
    Clonezilla, based on DRBL, Partclone and udpcast, allows you to do bare metal backup and recovery. Two types of Clonezilla are available, Clonezilla live and Clonezilla SE (server edition). Clonezilla live is suitable for single machine backup and restore. While Clonezilla SE is for massive deployment, it can clone many (40 plus!) computers simultaneously. Clonezilla saves and restores only used blocks in the harddisk. This increases the clone efficiency. At the NCHC's Classroom C, Clonezilla SE was used to clone 41 computers simultaneously. It took only about 10 minutes to clone a 5.6 GBytes system image to all 41 computers via multicasting!
    Features:

    Free (GPL) Software.
    Filesystem supported: (1) ext2, ext3, ext4, reiserfs, reiser4, xfs, jfs of GNU/Linux, (2) FAT, NTFS of MS Windows, (3) HFS+ of Mac OS, (4) UFS of FreeBSD, NetBSD, and OpenBSD, and (5) VMFS of VMWare ESX. Therefore you can clone GNU/Linux, MS windows, Intel-based Mac OS, and FreeBSD, NetBSD, and OpenBSD, no matter it's 32-bit (x86) or 64-bit (x86-64) OS. For these file systems, only used blocks in partition are saved and restored. For unsupported file system, sector-to-sector copy is done by dd in Clonezilla.
    LVM2 (LVM version 1 is not) under GNU/Linux is supported.
    Grub (version 1 and version 2) is supported.
    Unattended mode is supported. Almost all steps can be done via commands and options. You can also use a lot of boot parameters to customize your own imaging and cloning.
    Multicast is supported in Clonezilla SE, which is suitable for massively clone. You can also remotely use it to save or restore a bunch of computers if PXE and Wake-on-LAN are supported in your clients.
    Based on Partclone (default), Partimage (optional), ntfsclone (optional), or dd to image or clone a partition. However, Clonezilla, containing some other programs, can save and restore not only partitions, but also a whole disk.
    By using another free software drbl-winroll, which is also developed by us, the hostname, group, and SID of cloned MS windows machine can be automatically changed.

    Limitations:

    The destination partition must be equal or larger than the source one.
    Differential/incremental backup is not implemented yet.
    Online imaging/cloning is not implemented yet. The partition to be imaged or cloned has to be unmounted.
    Software RAID/fake RAID is not supported by default. It's can be done manually only.
    Due to the image format limitation, the image can not be explored or mounted. You can _NOT_ recovery single file from the image. However, you still have workaround to make it, read this.
    Recovery Clonezilla live with multiple CDs or DVDs is not implemented yet. Now all the files have to be in one CD or DVD if you choose to create the recovery iso file.

    License:

    Clonezilla itself is licensed under the GNU General Public License (GPL) Version 2. However, to run Clonezilla, a lot of free and open source software, e.g. the Linux kernel, a mininal GNU/Linux OS, are required.

    ------

    Code:
    http://sourceforge.net/projects/clonezilla/files/clonezilla_live_stable/1.2.6-40/clonezilla-live-1.2.6-40-i686.iso/download
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  2. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (17-01-11)

  3. #2
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    Clonezilla Live 1.2.6-59

    Clonezilla Live is a Debian-based live CD containing Clonezilla, a partition and disk cloning software similar to Norton Ghost. It saves and restores only used blocks in hard drive. With Clonezilla, one can clone a 5 GB system to 40 clients in about 10 minutes.


    FULL CHANGELOG BELOW

    Stable Clonezilla live 1.2.6-59 has been released.

    This release of Clonezilla live includes major enhancements, changes and
    bug fixes.
    MAJOR ENHANCEMENTS and CHANGES:

    * The underlying GNU/Linux operating system was upgraded. This
    release is based on the Debian Sid repository (as of 2011/Jan/13).
    * Linux kernel was updated to 2.6.32-30.
    * Live-boot was updated to 2.0.14-1.drbl1, and live-config was
    updated to 2.0.14-1.drbl2.
    * Language files were updated. Thanks to Alex Ibáñez López,
    Zhiqiang Zhang, Gianfranco Gentili, Jean-Francois Nifenecker, and Akira
    YOSHIYAMA.
    * Option "-q1" (i.e. force to use dd) was added as an option in
    expert mode for device to device clone. This could be useful if you want
    to clone an encrypted partition.
    * Another example custom-ocs-2 was added. It can be used to save
    and restore dual boot systems.
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:

    ip=**[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NETMASK]:[HOSTNAME]:[DEVICE]:[AUTOCONF]
    [,[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NETMASK]:[HOSTNAME]:[DEVICE]:[AUTOCONF]]***::
    e.g.
    ip=10.0.0.1::10.0.0.254:255.255.255.0::eth0,:::::e th1:dhcp

    BUG FIXES

    * Command "ocs-live-dev -s -d /dev/sda1" failed to copy files to
    the output dev (/dev/sda1), it was using files linked. Thanks to Asou
    Y.S. Chang for this bug report.
    * Force to unmount image repository before rebooting/shutdowning
    Clonezilla live. Thanks to Manuel Borchers for reporting this.
    * The option "-j2" was not working when using restoreparts. Thanks
    to dzundam for this bug report.


    X86 VERSION
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.6-59-i686.iso
    X64 VERSION
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.6-59-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  4. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (19-01-11)

  5. #3
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    Clonezilla Live 1.2.9-19




    This release of Clonezilla live (1.2.9-19) includes major enhancements,
    changes and bug fixes.

    ENHANCEMENTS and CHANGES:

    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2011/Jul/22).
    * Linux kernel was updated to 2.6.39-3.
    * Partclone was updated to 0.2.24.
    * Pbzip2 was updated to 1.1.4.
    * Brazilian Portuguese language was added. Thanks to Marcos Pereira da
    Silva Cruz .
    * The samba file system with hidden share now can be assigned in boot
    parameter "ocs_prerun". Thanks to nottaken37. (Ref:
    Code:
    https://sourceforge.net/projects/clonezilla/forums/forum/663168/topic/4589215
    )
    * Xz compression instead of gzip method was used when making squashfs,
    therefore the Clonezilla live iso or zip file is smaller by ~ 31 MB.
    * Program prep-ocsroot was improved to make mounting sshfs with an
    account name including white space.
    * Remove the option "-b1024" for pbzip2 since the unit is 100K, -b1024
    will use 1024*100K per thread, and this might cause system to crash due
    to out of memory for multiple cores. Without the option -b, the default
    value will be used. Thanks to Telligent for the bug report
    (
    Code:
    https://sourceforge.net/tracker/?func=detail&atid=671650&aid=3324096&group_id=115473
    ).
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    ip=**[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NETMASK]:[HOSTNAME]:[DEVICE]:[AUTOCONF]
    [,[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NETMASK]:[HOSTNAME]:[DEVICE]:[AUTOCONF]]***::
    e.g.
    ip=10.0.0.1::10.0.0.254:255.255.255.0::eth0,:::::e th1:dhcp

    BUG FIXES

    * A bug about failing to do disk to disk clone was fixed. Thanks to
    seagate-wdc for reporting this issue, and others for helping to confirm
    the issue and testing. (Ref:
    Code:
    https://sourceforge.net/projects/clonezilla/forums/forum/663168/topic/4589758)
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.9-19-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.9-19-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  6. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (30-07-11)

  7. #4
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Clonezilla Live 1.2.10-14


    [Clonezilla-release] Stable Clonezilla live (1.2.10-14) Released
    From: Steven Shiau <steven@nc...> - 2011-09-27 15:03

    This release of Clonezilla live (1.2.10-14) includes major enhancements
    and major bug fixes.
    ENHANCEMENTS and CHANGES:
    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2011/Sep/22).
    * Linux kernel was updated to version 3.0.0-3.
    * Partclone was updated to version 0.2.29.
    * Gdisk was updated to version 0.8.0, and compiled without Unicode
    support. Therefore libicu44 is no longer included. This makes the
    Clonezilla live ISO file smaller by about 6 MB.
    * Package partclone-utils was added.
    * iPXE was updated to the date 20110910 from iPXE Git repository.
    * German language files were added. Thanks to Michael Vinzenz.
    * By default when a GNU/Linux system is restored, the udev hardware
    records (70-persistent-cd.rules and 70-persistent-net.rules under
    /etc/udev/rules.d/) in the restored OS will be removed. This can be
    disabled in the expert mode with the option "-irhr".
    * Source tarball for all the packages in Clonezilla live was added. It
    can be found in the release repository, under the directory "source".
    * A new live boot parameter was added: nicif. This parameter is used to
    assign the network card's MAC address so that when it is booted via PXE,
    the correct network card can be assigned specifically. This is for a
    machine with 2 or more network cards. Example for this boot parameter:
    nicif=aa:bb:cc:dd:ee:ff.
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    e.g.
    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::

    BUG FIXES
    * Sgdisk failed to reload a GPT table if no initial GPT table on a new disk.
    * Boot parameter parsing has been improved to accept grub2 1.99's
    mechanism. It now works for three cases in /proc/cmdline (e.g., (1)
    ocs_prerun="sleep 5" (2) ocs_prerun=\"sleep 5\" and (3)
    "ocs_prerun=sleep 5").


    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.10-14-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.10-14-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  8. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (07-12-11)

  9. #5
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Clonezilla live (1.2.11-23) Released
    From: Steven Shiau <steven@nc...> - 2011-11-28 23:26

    This release of Clonezilla live (1.2.11-23) includes major enhancements
    and major bug fixes.
    ENHANCEMENTS and CHANGES

    The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2011/Nov/28).
    Linux kernel was updated to version 3.1.1-1.
    Partclone was updated to version 0.2.38.
    Gdisk was updated to 0.8.1.
    A new mode "1-2-mdisks" (one image to be restored to multiple disks)
    was added in Clonezilla main menu. This is useful for creating massive
    USB flash drives. Check this:
    http://drbl.sourceforge.net/screensh...lvin_Su_Taiwan
    This release supports VMFS5 imaging and cloning.
    An option "-pa|--postaction" was added to ocs-onthefly; it can be
    assigned to reboot or shut down the machine after cloning. Thanks to
    flyfoxuk for this idea.
    The option to fsck the source partition will be shown in beginner mode.
    The grub2 for EFI booting was improved. Now it is able to boot a Mac
    machine from a USB flash drive with the MBR partition table.
    The package cpufrequtils was added.
    The volume name of DOS and NTFS partitions on destination disk will
    be shown before restoring.
    Restore related menu, i.e. restoredisk or restoreparts, will only be
    shown when images exist in image repository.
    //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    e.g.

    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::


    BUG FIXES

    A bug in the option "-k1" was fixed.
    A bug where NFS 4 might have been automatically used after assigning
    the NFS version 2/3 protocol when mounting an NFS image repository was
    fixed.
    If the "system reserved partition" of MS Windows 7 or Vista is found
    when restoring with the option "-k1" enabled, this partition won't be
    enlarged to prevent boot failures.
    A bug about failing to clone NTFS partitions on the AMD64 version of
    Clonezilla live was fixed.

    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.11-23-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.11-23-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.11-23-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  10. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (07-12-11)

  11. #6
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Clonezilla Live 1.2.12-10

    This release of Clonezilla live (1.2.12-10) includes major enhancements
    and major bug fixes.

    ENHANCEMENTS and CHANGES
    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2012/Jan/27).
    * The Linux kernel was updated to 3.2.1-2.
    * Partclone was updated to version 0.2.45.
    * Syslinux was updated to 4.0.5.
    * A better mechanism was implemented in ocs-update-syslinux. Only when
    the files to be updated are found on the system "syslinux -i" will be run.
    * A better mechanism was implemented to keep the MS Windows boot
    reserved partition size when option "-k1" is chosen.
    * A better mechanism to deal with UFS partition in a GPT table when
    saving FreeBSD 9.0.
    * An option to use "autoname" to create the image name was added. Thanks
    to encephalophone (Mike) for the patch.
    * An option (-icds, --ignore-chk-dsk-size-pt) to skip checking skip
    checking destination disk size before creating the partition table on it
    was added. Thanks to Sartoratti Lorenzo for reporting this issue.
    * Option -z7|--lrzip-compress was added for Clonezilla to use lrzip to
    compress image.
    * VMFS3 and VMFS5 support are separated, no more mixed because
    partclone.fstype from 0.2.45 now can tell them. Since vmfs5 support is
    still buggy, disable it in drbl-ocs.conf.
    * A mechanism was added to avoid saving an image for an unmatched GPT
    and MBR partition table disk.
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    e.g.
    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::


    BUG FIXES
    * An issue about PXE booting on a machine with multiple network cards
    has been fixed.
    * An issue about the unknown slow execution after an image is restored
    100% has been fixed.
    * /live/ and /live/cow unmounting error or warning messages are
    suppressed when rebooting or halting.
    * Serial console did not have tty when live-getty and console boot
    parameters are assigned. Thanks to Shuras for this bug report.
    * A problem where failing to reinstall grub1 for the restored OS was fixed.
    * A problem where grub2 failed to be restored along with Fedora 16 due
    to a different grub2 boot directory, /boot/grub2/, was fixed. Thanks to
    Robert Weir for reporting this issue.


    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-10-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-10-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-10-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  12. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (01-02-12)

  13. #7
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Clonezilla Live 1.2.12-37

    This release of Clonezilla live (1.2.12-37) includes major enhancements
    and major bug fixes.
    ENHANCEMENTS and CHANGES

    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2012/Mar/25).
    * Linux kernel was updated to 3.2.12-1.
    * Partclone-utils was updated to 0.1.3.
    * Gdisk was updated to 0.8.2.
    * The image of a partition saved by dd is no longer treated as a
    broken one in ocs-chkimg.
    * The grub1 on ext4 warning will be shown again if grub1 is not run
    successfully.
    * An option was added to start over while keeping the mounted image
    repository.
    * An option -fsck-src-part-y was added so that fsck can be run
    automatically when saving and image. Thanks to imayneed for this suggestion.
    * A reserved name "all" of ocs-sr is used for finding all the devices
    in the system or in the image. Thanks to matthiaswe for this idea.
    * Package dnsutils was added.
    * Language files it_IT, de_DE and fr_FR were updated. Thanks to
    Gianfranco Gentili, Michael Vinzenz, and Jean-Francois Nifenecker.
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    e.g.

    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::


    BUG FIXES

    * It allows cancellation when selecting a directory name for the
    local image repository. Closed
    hXXps://sourceforge.net/tracker/?func=detail&atid=671650&aid=3491047&group_id=1154 73
    * Switched to use "lrzip -q -d -o -" instead of "lrzcat -q" so that
    other versions of lrzip can be used. Closed
    hXXps://sourceforge.net/tracker/index.php?func=detail&aid=3487541&group_id=115473& atid=671650.
    * This release uses btrfs instead of btrfsctl to tune the size of the
    btrfs file system.

    Code:
     http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-37-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-37-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-37-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  14. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (31-03-12)

  15. #8
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    This release of Clonezilla live (1.2.12-60) includes major enhancements
    and minor bug fixes.

    ENHANCEMENTS and CHANGES

    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2012/May/25).
    * Linux kernel was updated to 3.2.18-1.
    * Package drbl was updated to 1.12.9-1drbl, and package clonezilla was
    updated to 2.5.36-1drbl.
    * Partclone was updated to 0.2.48.
    * Gdisk was updated to 0.8.4-1.1drbl.
    * Allowing to enter command line prompt to create partition table when
    blank destination disk is found in restoreparts mode.
    * Package vlan was added. Thanks to ggarland for this suggestion.
    * An option to use "autohostname" to create the image name was added.
    Thanks to David Bauer (tererecool) for this idea.
    * File system vmfs5 support was enabled again.
    * Language files en_US, de_DE, es_ES, fr_FR, it_IT, ja_JP, zh_CN, and
    zh_TW were updated. Thanks to Michael Vinzenz, Alex Ibanez Lopez,
    Jean-Francois Nifenecker, Gianfranco Gentili, Akira YOSHIYAMA, and
    Zhiqiang Zhang.
    * //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    * //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    * ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    * e.g.
    *
    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::

    *
    BUG FIXES

    * File system cifs was not listed as one of the network file systems
    in prep-ocsroot.
    * The grpck error during booting was fixed. Ref:

    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-60-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-60-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-60-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  16. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (08-06-12)

  17. #9
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Clonezilla live (1.2.12-67) Released

    This release of Clonezilla live (1.2.12-67) includes minor enhancements
    and bug fixes.
    ENHANCEMENTS and CHANGES
    - The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2012/Jun/20).
    - Linux kernel was updated to 3.2.20-1.
    - Package drbl was updated to 1.12.14-1drbl, and package clonezilla
    was updated to 2.5.42-1drbl.
    - Partclone was updated to 0.2.49.
    - Gdisk was updated to 0.8.5-1.1drbl.
    - Booting on uEFI machine via CD is supported in this release.
    - Package ddrescue was removed because it's no more in Debian Sid, and
    we already have gddrescue. Ref:
    hxxp://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677101
    - //NOTE// From Clonezilla live 1.2.6-24, if you manage the boot
    parameters by yourself, you have to put the extra boot parameter
    "config" or "live-config" to make live-config to work.
    - //NOTE// From Clonezilla live 1.2.6-24, due to the change in
    Live-boot, the boot parameter to assign static IP address has been
    changed. The new format is:
    - ip=**[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]
    [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]]***::
    - e.g.
    -
    ip=eth0:192.168.100.1:255.255.255.0:192.168.100.25 4:8.8.8.8,eth1:192.168.101.1:255.255.255.0::


    BUG FIXES
    - Bug fixed: The restored Fedora 17 failed to boot via grub 2. Thanks
    to Robert Weir for reporting this issue.

    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-67-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-67-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-1.2.12-67-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  18. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (04-07-12)

  19. #10
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Clonezilla live (2.1.1-7) Released
    From: Steven Shiau <steven@nc...> - 2013-03-19 03:34
    This release of Clonezilla live (2.1.1-7) includes minor enhancements
    and bug fixes.


    *** ENHANCEMENTS and CHANGES ***
    * The underlying GNU/Linux operating system was upgraded. This
    release is based on the Debian Sid repository (as of 2013/Mar/14).
    * Partclone was updated to 0.2.59.
    * Clonezilla is now able to image Minix.
    * Program keyutils was added. Thanks to Joe M. for this suggestion.
    * Command grub-install is no longer run for grub1 on an ext4 file
    system when grub-install is from Debian. This prevents a potential
    indefinite hang.
    * A prompt about skipping re-installing grub 1 in ocs-functions was
    improved.
    * For imaging/cloning partition mode, "-g auto" is no longer turned
    on by default. While it's still on for the imaging/cloning disk mode.
    * The progress bar for resize2fs was turned on when resizing the
    ext file system to fit the partition size.
    *** BUG FIXES ***
    * Bugs where ocs-onthefly failed to use the "-k1" option and where
    ocs-tux-postprocess did not search LV were fixed.
    * A bug where there was no ocs-update-syslinux process in
    ocs-onthefly was fixed.


    Steven.
    --




    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-7-i486.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-7-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-7-amd64.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  20. The Following User Says Thank You to Larry-G For This Useful Post:

    pooface (21-04-13)

  21. #11
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Clonezilla live (2.1.1-25) Released
    From: Steven Shiau <steven@nc...> - 2013-04-30 07:29

    This release of Clonezilla live (2.1.1-25) includes minor enhancements
    and bug fixes.


    ENHANCEMENTS and CHANGES
    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2013/Apr/20).
    * Linux kernel was updated to 3.2.41-2.
    * Partclone was updated to 0.2.60.drbl1.
    * The package drbl was updated to 2.3.28-drbl1, and clonezilla was
    updated to 3.3.40-drbl1.
    * Sample file "custom-ocs-1" was updated.
    * A Dialog menu is used in the final action of Clonezilla live.
    * The MAC address of a network card will be shown when configuring the
    network settings.


    BUG FIXES
    * A bug which caused the first menu (start_clonezilla or enter_shell) to
    still continued even after it was cancelled.
    * When using "select_in_client" mode, the postrun action is now
    correctly passed to PXE clients.
    * A bug has been fixed which made cnvt-ocs-dev unable to convert cciss
    device names to sd[a-z]. Thanks to Andy Smith (a.smith at ldex co uk)
    for reporting this issue.


    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-25-amd64.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-25-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.1-25-i486.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  22. The Following 2 Users Say Thank You to Larry-G For This Useful Post:

    Sicilian (13-07-13),swahmed (11-07-13)

  23. #12
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Cloneizlla live (2.1.2-20) Released
    From: Steven Shiau - 2013-07-09 04:57
    This release of Clonezilla live (2.1.2-20) includes major enhancements
    and bug fixes.
    *** ENHANCEMENTS and CHANGES ***
    * The underlying GNU/Linux operating system was upgraded. This
    release is based on the Debian Sid repository (as of 2013/Jul/03).
    * Linux kernel was updated to 3.9.8-1.
    * Partclone was updated to 0.2.66.drbl1. A better disk cache
    mechanism was used.
    * The package drbl was updated to 2.4.18-drbl1, and clonezilla was
    updated to 3.5.1-drbl1.
    * The disk size info will be shown when selecting the images during
    restoring.
    * A summary of ocs-chkimg will be shown after image is checked.
    Thanks to Elke Moritz <moritz at linuxtag org> for this suggestion.
    * Package syslinux was updated to 5.01.
    * Packages lziprecover, nwipe and efibootmgr were added.
    * With the option "-k1" and "-icds" enabled, if the used data blocks
    are within the partition boundary, it's possible larger partition could
    be cloned to smaller one.

    *** BUG FIXES ***
    * File *sda-img.info should not be included in the partition image
    to be restored.
    * Device name sdap1 is not the partition of sda disk. Thanks to
    julienb35 for reporting this issue. Ref:

    hxxps://sourceforge.net/p/clonezilla/bugs/179/ * The allocated ramdisk size was too small when "toram" (not toram=filesystem.squashfs) option was used, some files in live CDwere not copied. Thanks to Nils Garcia (nils.garcia at ensea fr) forreporting this issue. * The postrun action was not selectable in expert mode. * Option -icds of ocs-sr and ocs-onthefly should be passed toocs-expand-mbr-pt. Thanks to Jerome Charaoui for reporting this issue(hxxp://sourceforge.net/p/clonezilla/bugs/175/). * The get_mkswap_uuid_cmd in ocs-functions failed to detect mkswapcommand for util-linux >= 2.20.


    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.2-20-amd64.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.2-20-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.1.2-20-i486.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  24. The Following User Says Thank You to Larry-G For This Useful Post:

    Sicilian (13-07-13)

  25. #13
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    [Clonezilla-release] Stable Clonezilla live (2.3.1-18) Released
    This release of Clonezilla live (2.3.1-18) includes major
    enhancements and bug fixes.


    ENHANCEMENTS and CHANGES

    * The underlying GNU/Linux operating system was upgraded. This release
    is based on the Debian Sid repository (as of 2014/Dec/08).
    * Linux kernel was updated to 3.16.7-2.
    * Package drbl was updated to 2.11.13-drbl1, and clonezilla was
    updated to 3.12.7-drbl1.
    * Syslinux was updated to 6.03.
    * Language files de_DE, ca_ES, es_ES, fr_FR, it_IT, ja_JP.UTF-8, tr_TR
    and sk_SK was updated. Thanks to Michael Vinzenz, Juan Ramón
    Martínez, René Mérou, Jean-Francois Nifenecker, Gianfranco Gentili,
    Akira YOSHIYAMA, Volkan GEZER and Ondrej Dzivy Balucha.
    * A mechanism was added to check if i386 library (libc6-i386 or
    glibc.i686) exists on x86-64 system when running makeboot.sh due to
    syslinux included in Clonezilla live is 32-bit.
    * Linux kernel i486 was replaced by i586 because now only i586 kernel
    exists on Debian Sid repository.
    * A better way to deal with --rsyncable option of gzip and pigz was
    implemented.
    (https://sourceforge.net/p/clonezilla...read/8d5f80a6/)
    * Adding support for device name format like /dev/rd/c0d0 and
    /dev/ida/c0d0 RAID cards.
    (https://sourceforge.net/p/clonezilla...read/e82e1c04/)
    * Now Clonezilla could support PV on disk, not only on partition.
    * Fake RAID/firmware RAID is now supported if its device naming style
    is /dev/md.
    * The partition from an image could be now restored to different name
    device, e.g. sda1 could be restored to sdb5.


    BUG FIXES

    * Temporarily disabled vmfs3 and vmfs5 support due to an issue
    (https://github.com/glandium/vmfs-tools/issues/12). Now dd is used
    for vmfs. Now waiting for the updating of vmfs-tools.
    * Options "-fsck-src-part" and ""-fsck-src-part-y" were duplicated in
    ocs-onthefly expert mode.
    * The input harddrive of ocs-install-grub might be more than one,
    therefore ocs-install-grub should take that into consideration.
    * Only device name /dev/mmcblk0p* worked. Those /dev/mmcblk[1-9]p*
    were not supported.

    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.3.1-18-amd64.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.3.1-18-i686-pae.iso
    Code:
    http://downloads.sourceforge.net/clonezilla/clonezilla-live-2.3.1-18-i586.iso
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  26. The Following User Says Thank You to Larry-G For This Useful Post:

    abu baniaz (21-12-14)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.