Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 28

Thread: Mutant Vs Octagon

  1. #1

    Title
    Junior Member
    Join Date
    Apr 2017
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Mutant Vs Octagon

    Hi Twol and all the other members !!

    Wanting to switch to a 4K Deco

    Can you help me choose between Mutant HD51 and Octagon SF4008?

    For years I have enjoyed Dreambox and Vu + Decos ...

    Can you give me the advantages and disadvantages of each model?

    I ask you since I see that you have both devices for some time now.

    Greetings.

  2. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Main difference is SF4008 supports up to 3 tuners and the SF4008 tuners are S2X.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  3. #3
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    SF4008: 3 tuners (2 physical =3 tuners), S2X (for those that need it), better remote, easy to switch bootmode (PiP/No PiP etc)
    HD51: 2 tuners(1 physical), Kodi 17, better use of the internal EMMC (for both Kodi and true Multiboot capability = multiple image support).
    Both have been good with support, Mut@nt more low key but have delivered 1st, Octagon have been promising more functionality and are extremely visable (like Kodi for Easter!) but still waiting.......

    Very difficult to choose between them. I use Octagon as my lounge receiver (in 1080P mode), HD51 as my test receiver (because of multiboot) (in 2160 mode) but picture wise nothing in it ... both excellent.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  4. The Following User Says Thank You to twol For This Useful Post:

    mr.raw (26-04-17)

  5. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    The only other thing I would add, is that the HD51 is typically bad (compared to say the ET8500) in connecting up an internal HDD, but the SF4008 is (in my view) a pain in the ass ... absolutely doable, but ALL those screws .. give me a break
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  6. #5

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts
    i have to admit, the HDD is a faff due to the sf4008 hdd holder being on the motherboard. but not all that bad
    PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS

  7. #6

    Title
    Junior Member
    Join Date
    Apr 2017
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hello again guys !!

    The Mutant HD51 with the standard tuner allows you to watch one channel and record another simultaneously?
    Or maybe I need to have two turners?

    I guess you'll tell me the best is OpenVix !!

    In Multiboot, what is your order in quality for the support?

    I use Ccam, in 4K only Oscam works?

    It is easy compatible ?

    They are any addons like TsPanel to download and install automatically?



    Greetings.

  8. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by ilexk View Post
    Hello again guys !!

    The Mutant HD51 with the standard tuner allows you to watch one channel and record another simultaneously?
    Or maybe I need to have two turners?

    I guess you'll tell me the best is OpenVix !!

    In Multiboot, what is your order in quality for the support?

    I use Ccam, in 4K only Oscam works?

    It is easy compatible ?

    They are any addons like TsPanel to download and install automatically?



    Greetings.
    1 physical tuner - gives 2 tuners so can watch/record
    In multiboot?? Not sure of the Q?
    They are both Arm receivers, so You only have Oscam, and it's not like CCcam
    Why do you need tspanel??
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  9. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    To balance my SF4008 negative screw comments, the HD51 has no On/Off switch .... it's pull the power lead, which I dislike ..... another reason why the SF4008 is in the lounge, my in-laws with their "finger-troubles" which constantly mess up the box, would have killed the HD51 by now by yanking the lead
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  10. The Following User Says Thank You to twol For This Useful Post:

    johnrichard (09-04-17)

  11. #9

    Title
    Junior Member
    Join Date
    Apr 2017
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hello again Twol !!
    How are you?
    I'm not clear about the tuner, with the serial you can see one and record another?

    From the same transponder or the whole satelite?

    I think the Linuxsat Panel seems interesting for downloading tools.
    Do not believe the same?

    Greetings.

  12. #10
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    The dvb-s2 tuner has 2 sat connections for independent satellite feeds
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  13. #11

    Title
    Junior Member
    Join Date
    Apr 2017
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    The dvb-s2 tuner has 2 sat connections for independent satellite feeds
    Looking at the photos, it seems that one is an input and another is antenna output.

  14. #12
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by ilexk View Post
    Looking at the photos, it seems that one is an input and another is antenna output.
    No, connects 2 sat inputs ... it's right in front of me at this moment
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  15. #13

    Title
    Junior Member
    Join Date
    Apr 2017
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    No, connects 2 sat inputs ... it's right in front of me at this moment
    mutant-hd51-4k.jpg

    look at this

  16. #14
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Yep, just pulled the box out and I am getting confused with the SF4008 downstairs .....sorry.
    The HD51 has room for 2 tuners with a sat feed at the top, rf out at the bottom on each tuner.... so maximum of 2 feeds.
    The SF4008 has room for 2 double tuners, each tuner takes 2 feeds ....although the 2nd tuner only has one useable input...so 3 possible connections.

    Sometimes these 2 receivers are too similar!!!! .... but are different ... I shouldn't be watching the sport whilst trying to respond.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  17. #15
    Mart336's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    29
    Thanks
    1
    Thanked 1 Time in 1 Post
    Those wo can look uk channels over 27.5W HD51 is better because bbc skript is working in short mode.
    Not 100% sure but it seems SF4008 can show 27.5W image only using bbc script long mode. If somebody can test it and need details ask me and i can help.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.