Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 4 of 4

Thread: Vu+ SOLO 2 remote control of TV & AMP

  1. #1

    Title
    Member
    Join Date
    Oct 2016
    Posts
    52
    Thanks
    1
    Thanked 2 Times in 2 Posts

    Vu+ SOLO 2 remote control of TV & AMP

    Hi All,

    Not sure if this is the correct place for my post but as its probably a setting within the enigma 2 i have added it here.

    My setup Sony TV, Onkyo Amp & VU+ Solo 2.
    VU+ connects to the amp via HDMI and i then have a HDMI run out of the amp to the TV.
    I currently have the VU+ remote setup to power on and off my TV via the TV Power Button.
    Is there a way to setup this so I can literally press one button on the VU+ remote which turns off the VU+ box, tv and amp.
    I'm sure it is possible but from my research and my current trialing it has not proved successful.

    If anyone with a similar setup could point me in the right direction that would be great.

  2. #2

    Title
    Member
    Join Date
    Oct 2016
    Posts
    52
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Any advice anyone. Really struggling with this

  3. #3
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by jonmarkwright View Post
    Any advice anyone. Really struggling with this
    I'm sure I came across an option to pair the Vu+ remote with the Onkyo Amp when I had mine, so I would look in the settings of the Onkyo or look in your manual.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  4. #4

    Title
    Member
    Join Date
    Oct 2016
    Posts
    52
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Right, we'll I'm very much closer through persistence and reading various posts on vu+ but more importantly on my amp. It appears that after setup the amp require switching off and on again. It was a little unclear so switched everything off then on again. Then as if by magic when I hit the vu+ stb button the vu+ goes into standby but then also switches the amp off and vice versa. Then after a little more playing with setting I now have the volume control on my amp not my vu+ box. So I'm now much happier but would also like the TV to switch off too . Iv played around but can't figure it out. It's not the end of the world as I can just press the TV power button the vu+ remote but just want it all done in one button press. Attached is my current vu settings any advice appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.