Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: Basic Settings help?

  1. #1

    Title
    Senior Member
    Join Date
    Mar 2015
    Posts
    267
    Thanks
    121
    Thanked 4 Times in 3 Posts

    Basic Settings help?

    Hi

    I am begging someone help me. I really dont understand why I am being ignored here. Dont know what I have said or done that is so wrong.

    Please will someone help me I am so stressed and am starting to lose it now.

    I have reflashed now I got told to just set up basically. But what basic settings do I need to setup?

    What do I need to setup in A/V, EPG etc

    I am sorry if I have ranted on here but no one understands how hard I am trying to fix the major issues I am having and feel really out of depth when I am getting no help on here when this place is supposed to be a help forum.

    Please can anyone help me.

  2. #2

    Title
    Senior Member
    Join Date
    Mar 2015
    Posts
    267
    Thanks
    121
    Thanked 4 Times in 3 Posts
    Has anyone really not got any suggestions?

    Please I am in desperate need of some advice.

    Why is it so hard to get help on here.

  3. #3

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2015
    Location
    Stafford
    Posts
    846
    Thanks
    202
    Thanked 170 Times in 151 Posts
    I sure people are not ignoring you - it's probably because you are not asking a specific question just 'HELP sort me out'. There are many tutorials and guides on here that will get you up and running. Once you'd tried to help yourself and encountered a specific problem I know many people would help. I don't mean to have a go but I find it difficult to understand that someone with over 200 posts can not do the basics.
    Anyhow try the following it should get you some where near

    Menu -> Setup -> Service searching -> AutoBouquetsMaker. Then Configure and set Providers
    Configure - Set up Mode = expert Schedule scan = yes Include 'not indexed' channels = yes
    Providers - Sky UK = yes Sky UK: area = scroll for your area that ends with custom (mine is Central Midlands Custom)
    Back out and scroll down to Start Scan and Okay
    Then :
    Menu -> Setup -> System -> EPG -> CrossEPG -> OpenTV providers, select Sky UK OpenTV,
    Menu -> Setup -> System -> EPG -> CrossEPG - Download now, EPG sorted for your UK requirements.
    VU+ Solo2 HDD Harmony 650 remote
    Mutant HD51 4K
    VU+ Zero
    Edision OS MINI

  4. #4
    adm's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2014
    Location
    Southend on Sea, UK
    Posts
    1,636
    Thanks
    62
    Thanked 647 Times in 505 Posts
    Quote Originally Posted by champs4life View Post
    Hi

    Please will someone help me I am so stressed and am starting to lose it now.
    Possibly no one is answering because you haven't told us what you are trying to set up.

    What do I need to setup in A/V, EPG etc
    Can assume that you live in the UK? Or Ireland or in continental Europe? The answered you get can be country specific.

    A/V
    Assuming UK and you have a fairly modern HD TV (you give us no clues in a general help post about what you are connecting to

    Video output = HDMI
    Automatic resolution = Disabled
    Mode = 1080i
    Refresh rate = 50Hz
    Display 4:3 content as = just scale
    Display >16:09 content as = just scale
    Dolby Digital/DTS downmix = try yes
    AC3 delay = try 0
    PCM delay = try 0

    Now some of these settings may/are Enigma 2 box specific so your options may not match but the basics are there. These settings may not in future be your personal preferences but they should get you working.

    EPG etc.

    Which service are you trying to set up?

    UK Freeview (via an aerial)?
    UK Freesat (via satellite)?
    Sky?
    Virgin cable?
    An Other service?

    The answers can be very different depending on what you are trying to do. Again you have given us no clues in you generic help post.
    Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)

  5. #5

    Title
    Senior Member
    Join Date
    Mar 2015
    Posts
    267
    Thanks
    121
    Thanked 4 Times in 3 Posts
    I apologise I guess it was my post for not explaining everything properly. I just want to get everything right. I just cant take the constant hanging crashing anymore.

    All I have done is reflashed and just applied very basic settings to a/v, epg. Not sure what else to do.

    I am in the UK and I have a samsung TV.

    Please accept my apology for coming across as really desperate. I know I should have given more information since the outset. Its my fault.

  6. #6
    adm's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2014
    Location
    Southend on Sea, UK
    Posts
    1,636
    Thanks
    62
    Thanked 647 Times in 505 Posts
    Quote Originally Posted by champs4life View Post
    I apologise I guess it was my post for not explaining everything properly. I just want to get everything right. I just cant take the constant hanging crashing anymore.

    All I have done is reflashed and just applied very basic settings to a/v, epg. Not sure what else to do.

    I am in the UK and I have a samsung TV.

    Please accept my apology for coming across as really desperate. I know I should have given more information since the outset. Its my fault.
    hanging and crashing could be caused by a poor signal input. What service are you trying to get? Satellite? Terrestrial via an aerial? cable TV?
    Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)

  7. #7

    Title
    Senior Member
    Join Date
    Mar 2015
    Posts
    267
    Thanks
    121
    Thanked 4 Times in 3 Posts
    Both satellite and cable.

    What do you mean by poor signal input?

    Couldn't there be issues with box itself?

  8. #8

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    2,049
    Thanks
    404
    Thanked 668 Times in 547 Posts
    Until you upload some logs no-one will know what the issue is.
    Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.