Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: XTrend ET9500 picture freezes But audio works on latest image

  1. #1

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post

    XTrend ET9500 picture freezes But audio works on latest image

    I have the latest open vix image currently flashed(4.2.006). After the image 4.2.004 this problem started. The picture freezes when every program ends but audio continue to play current programs. Then i have to press channel list and select the channel then picture started to play. I have tried Open PLi image and works ok but on that Channel changing is not easy. because Ch+ and CH- not changing the channel. Therefore i came back to Open vix with new firmware. But the problem still there. Please look into this. Please advice me how to get the log file from ET 9500.
    Thanks in advance

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Cable, sat, terrrestial input?
    Plugins installed or vanilla install?
    Menu, system, logs. Change settings from flash to usb/hdd and also turn on debug logs.
    Use ftp to extract log from usb/hdd folder log
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. #3
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Cable, sat, terrrestial input?
    Plugins installed or vanilla install?
    Menu, system, logs. Change settings from flash to usb/hdd and also turn on debug logs.
    Use ftp to extract log from usb/hdd folder log

    When you flashed to 4.2.004 did you go from 4.1 and did you restore settings or setup from new?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  4. #4

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    Input is Satelite twin feeds, CCcam plugin installed, I done changes in the log settings but there is no logs now.
    Everytime I flash I never restore settings, but restore service lists using Dreambox edit.

    Now I flashed 4.2.001 but still problem stays
    Thanks for the reply

  5. #5

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    Hi
    Finally the problem is solved with Open vix 4.1.016. I think 4.2 image have problem for ET 9500. Anyone with ET 9500 and 4.2 works without problem please let me know. Team please check what you changed in 4.1 and 4.2 why this happening.
    Thanks in advance

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    What happens if you backup your current image, then flash latest ( 8?) but don,t restore channel settings.
    E.g. Restore softcam/CCcam, but either run a full scan or easier just ABM to generate some bouquets and then try playing the services.
    By the way was it all services or just some?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  7. #7

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    I did not tried the full image backup but I am willing to do that. The problem was for not only for one channel it freezes most of the channels..
    Thanks for the reply. I will post the results when i do the latest again.

  8. #8

    Title
    Junior Member
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    After 4.2.011 all the problems gone. Thanks for the Vix image team.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.