Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 34

Thread: Vu+ Turbo Problem

  1. #16
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Is there going to be a solution to this problem as we're nearly six weeks down the line without being able to use cable?

    Is there any way to use the old driver?

    Regards

  2. #17

    Title
    Junior Member
    Join Date
    Mar 2012
    Posts
    10
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Hi Guys,

    I too am having the same problem on a VU uno, Tried on latest firmware and 3.2.037, no joy with either, cannot see the tuner when in service searching,

    Will VIX be able to resolve this issue for the older boxes?

  3. #18
    gedclarke's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Feb 2012
    Location
    Liverpool UK
    Posts
    167
    Thanks
    122
    Thanked 54 Times in 25 Posts
    Still not fixed with new image 4.2.001 on my duo. Exact same fault, when try to install new driver screen flashes and does not install or installs faulty as tuner is still not seen. Been a while now without cable tv, can anyone give an update or a temporary fix as issue is affecting several members. Cheers Ged.

  4. #19
    gedclarke's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Feb 2012
    Location
    Liverpool UK
    Posts
    167
    Thanks
    122
    Thanked 54 Times in 25 Posts
    If possible can whoever is in charge of feeds put the old driver (r2) back available for download?

  5. #20
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Is there going to be a resolution to this problem please? I only got about a month of use from this tuner before this problem occurred & it's been nearly 2 months without cable now.

    Regards
    micscave

  6. #21
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Everyone's best bet is to fire an email off to Vu themselves and complain. The more the merrier.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  7. #22
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Not sure what to say to Vu?

    rossi2000 indicated in post 13 that this would be fixed within the image in due course.

    Can we not just use the last driver that worked which was -r2?

    Regards
    micscave


    Sent from my iPhone using Tapatalk[/QUOTE]

  8. #23
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Only other suggestion is flash with the last image it worked with then ftp into the box and save the old drivers to your desktop and then reinstall the latest image and then ftp the old drivers across to the box and overwrite.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  9. The Following 2 Users Say Thank You to Andy_Hazza For This Useful Post:

    Bangord30 (19-08-16),micscave (19-08-16)

  10. #24
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Hi Andy
    That sounds like a plan, when I FTP into the box, where would I find the driver?

  11. #25
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by micscave View Post
    Hi Andy
    That sounds like a plan, when I FTP into the box, where would I find the driver?
    Sorry for the late reply buddy. You can find the drivers in; lib/modules/3.14.28-1.8/extra
    Bear in mind that the /3.14.28-1.8/ folder will most likely differ as this is taken from my Vu+ Solo4K, but the contents in the /extra/ folder is what you want to save to your desktop as they are the drivers you will require to ftp over when you flash the new image. When transferred, restart your receiver and hopefully you will be able to view cable again.
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  12. The Following User Says Thank You to Andy_Hazza For This Useful Post:

    gedclarke (21-08-16)

  13. #26
    gedclarke's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Feb 2012
    Location
    Liverpool UK
    Posts
    167
    Thanks
    122
    Thanked 54 Times in 25 Posts
    Quote Originally Posted by micscave View Post
    Hi Andy
    That sounds like a plan, when I FTP into the box, where would I find the driver?
    Hello again micscave, I ftp'd the folders Andy said before and after installing the driver. However nothing changed in the folder Andy said so I did a bit of comparing between before and after and I think I found what I think are the drivers in the following folders (I used vix 3.2 as r2 is still in the feeds)

    lib/modules/3.9.6/kernel/drivers/media/usb

    this folder contains 3 folders which i believe contain r2 of the driver dvb-usb, dvb-usb-v2 & vuplus

    cannot confirm if this will work as have not had time to try yet as family are using box, will report back as soon as I try

  14. The Following User Says Thank You to gedclarke For This Useful Post:

    micscave (25-08-16)

  15. #27
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by gedclarke View Post
    Hello again micscave, I ftp'd the folders Andy said before and after installing the driver. However nothing changed in the folder Andy said so I did a bit of comparing between before and after and I think I found what I think are the drivers in the following folders (I used vix 3.2 as r2 is still in the feeds)

    lib/modules/3.9.6/kernel/drivers/media/usb

    this folder contains 3 folders which i believe contain r2 of the driver dvb-usb, dvb-usb-v2 & vuplus

    cannot confirm if this will work as have not had time to try yet as family are using box, will report back as soon as I try
    You could be right buddy. Sorry for my previous post.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  16. The Following 2 Users Say Thank You to Andy_Hazza For This Useful Post:

    gedclarke (21-08-16),micscave (25-08-16)

  17. #28
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Quote Originally Posted by gedclarke View Post
    Hello again micscave, I ftp'd the folders Andy said before and after installing the driver. However nothing changed in the folder Andy said so I did a bit of comparing between before and after and I think I found what I think are the drivers in the following folders (I used vix 3.2 as r2 is still in the feeds)

    lib/modules/3.9.6/kernel/drivers/media/usb

    this folder contains 3 folders which i believe contain r2 of the driver dvb-usb, dvb-usb-v2 & vuplus

    cannot confirm if this will work as have not had time to try yet as family are using box, will report back as soon as I try
    Hi gedclarke
    That looks promising, I'll have a proper look over the weekend and report back. In the meantime, if you try it, let us know what happens.

    micscave

  18. #29
    micscave's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2010
    Location
    Staffordshire
    Posts
    379
    Thanks
    397
    Thanked 95 Times in 77 Posts
    Okay I've had a play with this without any success. I downloaded all the suggested folders from Vix3.2.
    I then installed the latest image and ftp into box and transferred the previously downloaded folders to the relevant folder, rebooted and still the cable tuner doesn't show up.

    Would it be possible for one of the VIX team to upload the r2 driver so that we can properly install it please?
    Or doesn't it work like that?

    Regards
    micscave

  19. #30
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    I've just tested VU+ USB tuner on a Zero, I can't see any issue.

    Anyone having an issue please do exactly as follows:

    1) Take a backup of your existing image, you may need it again.
    2) Connected USB tuner to USB port.
    3) USB re-flash and setup complete fresh OpenViX 4.2.001. Do not install ANYTHING extra. Just complete the first install wizard, skip scanning.
    4) Using 'Putty' telnet install USB Turbo tuner drivers using command below:

    opkg install enigma2-plugin-drivers-dvb-usb-turbo

    You should see something like below:

    Welcome to OpenViX for vuzero
    openvix 4.2 vuzero

    vuzero login: root
    root@vuzero:~# opkg install enigma2-plugin-drivers-dvb-usb-turbo
    Installing enigma2-plugin-drivers-dvb-usb-turbo (1.0-r3) on root.
    Downloading http://www.openvix.co.uk/feeds/openv...1.0-r3_all.ipk.
    Installing vuplus-tuner-turbo (3.13.5-20150303) on root.
    Downloading http://www.openvix.co.uk/feeds/openv...303_vuzero.ipk.
    Installing kernel-module-dvb-usb (3.13.5-.2) on root.
    Downloading http://www.openvix.co.uk/feeds/openv...-.2_vuzero.ipk.
    Installing kernel-module-cypress-firmware (3.13.5-.2) on root.
    Downloading http://www.openvix.co.uk/feeds/openv...-.2_vuzero.ipk.
    Installing kernel-module-dvb-usb-v2 (3.13.5-.2) on root.
    Downloading http://www.openvix.co.uk/feeds/openv...-.2_vuzero.ipk.
    Configuring kernel-module-dvb-usb.
    Configuring kernel-module-dvb-usb-v2.
    Configuring vuplus-tuner-turbo.
    Configuring kernel-module-cypress-firmware.
    Configuring enigma2-plugin-drivers-dvb-usb-turbo.
    root@vuzero:~#
    Highlight all the output in Putty with your mouse, selecting all the text will auto copy.

    Post all the install log here please.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.