This guide is suitable for any dual booting Wetek device.

You will need:

  • WeTek (dual booting model)
  • Micro SD (minimum 4 GB) class 10 recommend.
  • PC/Mac


Software and Tools:

  • OpenELEC, LibreELEC, Enigma 2 image, whatever you wish to dual boot.
  • Win32 Disk Imagger -
    Code:
    http://sourceforge.net/projects/win32diskimager/
  • SD Formatter 4.0 for SD/SDHC/SDXC-
    Code:
    https://www.sdcard.org/downloads/formatter_4/
  • Free Winrar -
    Code:
    http://freedownloadwinrar.net/all-languages


Installation:

1. Download SD Formatter 4.0 for SD/SDHC/SDXC
click on this link ->
Code:
https://www.sdcard.org/downloads/formatter_4/
scroll down to SD Formatter 4.0 for Windows and Mac

Download version for your computer and install. After installation you will have a desktop icon knip12.png

Double click on the Desktop icon.

knip13.png

if you get the above get you have no card in your reader so put a card in your reader and clcik on Refresh.

knip14.png

click on [Format]

knip15.png

click on [OK]

knip16.png

click on [OK]

knip17.png

Wait for format to complete and your SD card will be ready.

Download OpenELEC, LibreELEC, Linux Enigma 2, whatever you want to dual boot to your desktop.

If you DO NOT have Winrar installed on your PC/MAC install it. Download from here
Code:
http://freedownloadwinrar.net/all-languages
Right click on your download image file and select 'Extract here'

winrar08.png

Keep in mind where the .img file has been extracted too.

Download and install Win32 Disk Imager
Code:
http://sourceforge.net/projects/win32diskimager/files/latest/download
After installation you should have this desktop icon win3211.png

RIGHT CLICK ON THE ABOVE ICON AND SELECT 'RUN AS ADMINISTRATOR'.

win3212.png

Note: After installation Win32 Disk Imager application is located at:
Windows 64 bit: C:\Program Files (x86)\ImageWriter
Windows 32 bit: C:\Program Files\ImageWriter

Click on blue Folder icon and browse for wetek-openelec folder, where inside you will find .img file, and select it.



Now, you should select from Devices dropdown menu, letter which represents inserted Micro SD card
Once when You selected Micro SD card, click on [Write], confirm everything what Image Writer may ask
you and wait that application burn .img file to Micro SD



Click on YES





When complete



Click ok and remove SD card from PC/MAC.

Power off Wetek device, insert SD card and power on. Depending on device and firmware version you will get option to boot in whatever OS you have added to SD card or you will get prompted asking what you want to boot.