Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 7 of 7

Thread: Three tuners with two LNB feeds - loop through query

  1. #1

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    290
    Thanks
    100
    Thanked 73 Times in 59 Posts

    Three tuners with two LNB feeds - loop through query

    I took a punt on one of the LX3s from WoS this week and I'm just setting it up tonight but I'm confused around the loop through settings.

    Basically I've got the three DVB-S tuners in there and I've got two feeds coming from the LNB connected to the in ports of tuners A & B.

    I've then connected the output of tuner A to the input of tuner C.

    Tuners A & B are configured in simple mode and both pointing at 28.2E and none, and Tuner C is in loop through mode and is configured as connected to Tuner A.

    If I use Sat Finder it only shows me Tuners A & B as being available and from testing I can only playback two channels at once - I can't actually get three playing at the same time.

    I'm just trying to work out how this should work - if I try and playback a channel on the same transponder as tuner A on tuner C that should let me get three streams shouldn't it?

    The manual only shows loop through being used with one LNB feed to tuner A with the loopback cable then connected to the input of tuner B - should I be doing that with the separate feed into tuner C?

    I tried changing tuner C so that it is configured the same as A & B and it seems to find channels fine in sat finder etc (as they all do and lock ok etc).

    Thanks in advance
    Last edited by aido; 25-06-15 at 00:37.

  2. #2

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    Try without loop through cables first, not all E2 boxes need them when using loop through to another internal tuner.
    Use both feeds in a tuner to make sure they work as expected.
    If both feeds work on a single tuner, check that you get the same results on all other tuners.
    If all works as expected, it really is down to the drivers provided by the manufacturer as to your loop through options.
    Some manufacturers drivers work better than others in this area, some copy mistakes made by other manufacturers...
    Don't have an LX3 to compare on, but what you want should be easily possible.
    Feeds to A & C, C looping through to B (without hardware cable) would be my first try.
    If that doesn't work, debug logs might be handy.

  3. The Following User Says Thank You to judge For This Useful Post:

    aido (25-06-15)

  4. #3

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    290
    Thanks
    100
    Thanked 73 Times in 59 Posts
    Thanks mate, I'll do some more testing when I get in from work tonight

    Everything else so far has worked well - transcoding etc all seems fine via Blackbox HD on the iPhone and it's a powerful little box and seems they've all sold now.

    The only bad thing I can say about it is the remote sensor has a much narrower window than the XP1000 it's replacing - the remotes looks identical with slightly different key mapping but they use different frequencies so I can't see if it's the remote end or the receiver end - I've got a uni remote so will see if that is the same

  5. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Quote Originally Posted by aido View Post
    The manual only shows loop through being used with one LNB feed to tuner A with the loopback cable then connected to the input of tuner B - should I be doing that with the separate feed into tuner C?
    To have full range on tuner C you will need a direct feed to LNB, if Tuner A is busy and C is looped to A, C will only have available channels on the quadrant A is using.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  6. The Following User Says Thank You to Sicilian For This Useful Post:

    aido (25-06-15)

  7. #5

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    290
    Thanks
    100
    Thanked 73 Times in 59 Posts
    Quote Originally Posted by Sicilian View Post
    To have full range on tuner C you will need a direct feed to LNB, if Tuner A is busy and C is looped to A, C will only have available channels on the quadrant A is using.
    That's what I was expecting but in that config it is as though tuner c doesn't exist - I'm still at work for a couple more hours so I'll have more of a play around later

  8. #6
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,578
    Thanks
    2,004
    Thanked 4,925 Times in 3,259 Posts
    Satfinder does not support loopthrough or satposdepends.
    Help keep OpenViX servers online.Please donate!

  9. The Following User Says Thank You to Huevos For This Useful Post:

    aido (25-06-15)

  10. #7

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    290
    Thanks
    100
    Thanked 73 Times in 59 Posts
    Ah that'll be it then thank-you - the box info shows three tuners but sat finder was only showing two unless I had it in simple mode and that's one of the reasons I was getting confused

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.