Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 14 of 14

Thread: Glitching recordings problem

  1. #1

    Title
    Junior Member
    Join Date
    May 2011
    Posts
    14
    Thanks
    12
    Thanked 1 Time in 1 Post

    Glitching recordings problem

    Hi guys i have my Miraclebox Premium Twin Hd for a few weeks now and when i try to watch recordings I'm getting glitching constantly every few seconds anyone have this problem.
    i have tried 4 different hard drives 3.5 & 2.5 with same results. Any help would be great..
    Thanks in advance...

  2. #2

    Title
    Senior Member
    Join Date
    Jul 2014
    Posts
    229
    Thanks
    31
    Thanked 11 Times in 11 Posts
    Try turning the fan speed up above 2000

  3. The Following User Says Thank You to gilvey For This Useful Post:

    BURNSY9999 (05-10-14)

  4. #3

    Title
    Junior Member
    Join Date
    May 2011
    Posts
    14
    Thanks
    12
    Thanked 1 Time in 1 Post
    Quote Originally Posted by gilvey View Post
    Try turning the fan speed up above 2000
    thanks bud i will try it now
    same results bud but thanks for you help..
    Last edited by BURNSY9999; 05-10-14 at 11:13.

  5. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Did you initialise the HDD correctly? Menu > Setup >System > Storage devices?

    Free to air or encrypted channels?
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  6. The Following User Says Thank You to Sicilian For This Useful Post:

    BURNSY9999 (05-10-14)

  7. #5

    Title
    Junior Member
    Join Date
    May 2011
    Posts
    14
    Thanks
    12
    Thanked 1 Time in 1 Post
    Quote Originally Posted by Sicilian View Post
    Did you initialise the HDD correctly? Menu > Setup >System > Storage devices?

    Free to air or encrypted channels?
    yes m8 ,did initialise the HDD correctly and Free to air HD channels,sd doing the same..
    Last edited by BURNSY9999; 05-10-14 at 12:18.

  8. #6

    Title
    Junior Member
    Join Date
    May 2011
    Posts
    14
    Thanks
    12
    Thanked 1 Time in 1 Post
    i have contacted WOS just incase its a fault with the box.
    thanks everyone for your help

  9. #7
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,769
    Thanks
    235
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by BURNSY9999 View Post
    Hi guys i have my Miraclebox Premium Twin Hd for a few weeks now and when i try to watch recordings I'm getting glitching constantly every few seconds anyone have this problem.
    Not that I'm aware of.
    I did have one recording that broke-up at the start, but it settled down after a few seconds. And that was the only recording I've done in "record now" mode, so I assume it was related to starting up in the middle of a GOP.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  10. #8

    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Posts
    2,708
    Thanks
    3,077
    Thanked 978 Times in 598 Posts
    Is the recording playing ok if you transfer it to your PC and play it?

    Also, maybe try to transfer a recording to a usb drive and try playing it on the receiver from it. Just to check if it's perhaps drivers or something like that.

    Are you on the latest Vix image?
    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

  11. #9

    Title
    Forum Supporter
    Donated Member
    Join Date
    Nov 2012
    Posts
    73
    Thanks
    42
    Thanked 8 Times in 6 Posts
    I have reverted back to build 808 with no problems at all, was on helios 041 with loads of glitching even on older recordings from the hard drive hope this helps

  12. #10
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,100
    Thanks
    1,265
    Thanked 1,115 Times in 879 Posts
    Quote Originally Posted by nipperlocko View Post
    I have reverted back to build 808 with no problems at all, was on helios 041 with loads of glitching even on older recordings from the hard drive hope this helps
    Do you not have a Technomate box? This is a Miraclebox Twin thread.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  13. #11

    Title
    Forum Supporter
    Donated Member
    Join Date
    Nov 2012
    Posts
    73
    Thanks
    42
    Thanked 8 Times in 6 Posts
    yes I have a technomate box and I find that sometimes the glitching is caused by the image/drivers hence the reason I mentioned the builds I am on

  14. #12
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,100
    Thanks
    1,265
    Thanked 1,115 Times in 879 Posts
    Fair enough, but you might have mentioned that in your post. The original poster has no way of knowing that you are referring to an issue on a different box. The interactions between drivers and images cause different issues on different boxes, usually. There is a pattern of disk-related problems on Quad and Quad Plus boxes since release 025 of ViX which is when new linux kernel code and drivers were implemented. There have been no similar issues reported on the Miraclebox Premium Twin or other makes so far so this may well be a completely different issue. I'm just trying to ensure that the fault diagnosis is as clear as possible.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  15. #13

    Title
    Member
    Join Date
    Mar 2014
    Posts
    48
    Thanks
    0
    Thanked 3 Times in 3 Posts
    I also have a technomate and upgrade to build 41 yesterday but was having constant glitches and freezes so gone back to build 37 and it's rock steady.

  16. #14

    Title
    Junior Member
    Join Date
    May 2011
    Posts
    14
    Thanks
    12
    Thanked 1 Time in 1 Post
    sending back tomorrow as advised by WOS
    Last edited by BURNSY9999; 05-10-14 at 18:15.

  17. The Following User Says Thank You to BURNSY9999 For This Useful Post:

    Joe_90 (05-10-14)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.