Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 5 123 ... LastLast
Results 1 to 15 of 72

Thread: OpenViX Apollo Updates and Changelogs.

  1. #1
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    OpenViX Apollo Updates and Changelogs.

    OpenViX-Apollo 001 AVAILABLE NOW







    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 906
    [epgcache] add Virgin UK support.
    [GetEcmInfo] if no /temp/ecm.info, do not assume channel is 'FreeToAir'.
    Merge remote-tracking branch 'pli/master'
    [SoftwareUpdate] fix reading of e2 log.
    Only clear CAID cache when it is filled with the fake CAID 0000
    GetEcmInfo: Avoid that ecm has the value None
    Improve french translation
    [SoftwareUpdate] fix log view.
    [EpgSelection] fix possible BSOD.
    ServiceInfo: small changes to the length of the text
    [MovieList] add fallback question to delete instead of move to Trash, if move failed.
    [Trashcan] fix issues with creating.
    streamserver: fix potential segfault on authentication
    Ensure that the ecm info in softcamSetup is the latest
    [NetworkSetup] fix nfs autostart for new OE.
    streamserver: use internal setting for authentication
    [Translatons] ET Update, thanks Rimas!
    streamserver: initialize cryptdata
    [TimerList] move Orb position after Service Name.
    [TimerList] cleanup support code for RemoteTimer plugin.
    [Satfinder] Allow access to plugin while recordings in progress
    Merge remote-tracking branch 'pli/master'
    [InfoBarGenerics] add Vol keys not to close SIB.
    Small improvement related to encryption flag
    [InfoBarGenerics] only allow PiP zapping for STB's that support it.
    [TimerList] cosmetic tweak.
    ims cs po
    fixed missing text for sortby, movieoff and movieoff_menu when is selector on directories
    streamserver: follow up on 4fbfb08acd95f91f107c21a38521c7de96856aae
    generalise radio sd mvi
    [TimerList] add RemoteTimer support.
    Merge remote-tracking branch 'pli/master'
    [config] add removeNotifier.
    remove whitespace
    add stream info similar as orbital position into timer event in timerlist. Thanks to Dima73

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 001
    [mutant2400] add initrd for transcoding
    [busybox] need rebuild for gigablue update
    [dm800] fix wifi build for legacy kernels
    [gigablue] update gb-multiquickbutton for new oe-core
    Update xtrendalliance.conf
    [openhdf] update bootlogo.bb
    [GigaBlue Quad, QuadPlus] ddbootup - set eth0 and usb to second cpu thread add network tweaks
    [openhdf] pushed some updates that have been made in the last few month...
    [dags] 7356 update drivers 23.05.2014
    [openhdf] change spinner files
    [GigaBlue Quad, QuadPlus] Update driver
    [GigaBlue Quad, QuadPlus] Change defconfig
    [3rd-party plugins] Update
    [GigaBlue SEPlus, UEPlus] ReADD enigma2-plugin-systemplugins-audioeffect
    [GigaBlue SEPlus, UEPlus] Remove TARGET_FPU
    [GigaBlue SEPlus, UEPlus] Switch to Kernel 3.12.1
    [hd2400] update drivers 23.5.2014
    Merge branch '2.2' of https://github.com/oe-alliance/oe-alliance-core into 2.2
    [INI] added new r8723 wifi driver + fixed 8192cu for 3.13.0 kernels
    [submodule] e2ooenplugins update
    [packagegroup-base] make change so it forces a rebuild, as GigaBlue has changed it's 'MACHINE_EXTRA_RDEPENDS'
    [hd2400] update drivers 21052014
    [INI] some driver update
    [HDx] Chane rcu map for Beyonwiz only
    [ini] prepare for future use + wifi patches for > 3.13.0
    [openwebif] Sanitise version number
    [gigablue] add start of transstreamproxy to inetd conf
    [openatv] add splash1.bmp
    [meta-oe] fix checksum on linux-libc-headers.
    [3rd-party plugins] Update
    [azboxme] add missing kernel patch
    [gigablue] clean up conf
    [3rd-party plugins] Update
    [dags] update drivers 19.5.2014 Model 7335 and 15.05.2014 model 7356
    [odin] update drivers file name to zip
    [odin] update drivers 16.5.2014 optimise for new oe-a 2.1 (gcc 4.8.2)
    [gigablue] enable transcoding need new drivers
    [dreambox] fix build new oe-brand
    [meta-oe] fix some BASE variables.
    [core] fix BASE variable's.
    [blackbox] update drivers 17.5.2014, test for oscam and streaming
    Update enigma2-plugin-skins-blue-hd.bb
    Update oe-alliance-skins.bb
    [oe-alliance-skins] add Red-HD
    Add python-compression to enigma2-plugin-extensions-openwebif.bb
    [vuplus] hbbtv/youtubetv - Fixed hangup bug and segmentation fault.
    [3rd-party plugins] Update
    [hd2400] update drivers 19.5.2014, update ci for 4 tuners
    [3rd-party plugins] Update
    [meta-brands] fix vendor meta base folder variable
    [3rd-party plugins] Update
    [3rd-party plugins] Update
    [meta-brands] fix vendor meta base folder variable, fix drivers meta data.
    [azbox] move machines folder under conf
    [meta-brands] gigablue linux fix folder name.
    [kernel] fix missing patch files
    [meta-brands] gigablue linux add missing patch.
    [meta-brands] gigablue drivers fix missing files.
    [nfs-utils] bump to 1.3.0
    [meta-brands] fix layer conf's
    [meta-oe] remove machine conf's
    [meta-oe] OpenWebIF bump PV to 2.9
    [meta-brands] add machine conf's
    [meta-brands] rename 'meta-etx00' to 'meta-xtrend'
    [meta-brands] rename meta-dreambox to 'meta-dream'
    [meta-brands] move some patches form meta-oe.
    [gigablue] add kernel 3.12.1 for SEplus/UEplus - no switch to 3.12.1 yet
    [meta-brands] add some missing linux patches.
    [engima2] fix build for new layer.
    [orc] get rid of error messages
    [busybox] use SHA-512 ($6$...) passsword encryption by default, like the passwd program from the "shadow" package already does.
    [openvix] add version number to mgcamd
    [nfs-utils] build for machine as mipsel32 single feed can only store one version, and some kernel's use higher version.
    [openvix] fix aurora bootlogo
    [3rdparty] update
    [layer] add new layer 'BRANDS' used for brands bb's, idea taken from PLi (thanks guys)
    Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1
    [beyonwiz] fix feeds link for new distro conf
    [3rd-party plugins] Update
    [beyonwiz] updated distro conf
    [dm800] fix  file://tc_ematch-header-files.patch'. Unable to fetch URL from any source.
    Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1
    fix for build with new makefile
    [openvix] add some bootlogo's to feeds thanks Maxwell.
    [hd2400] fix typo
    [hd2400] fix wrong kernel
    [hd2400] add remote control
    [formuler] rename linux kernel folder
    add support new oem skylake model HD2400
    [azbox] azbox-hd-buildimage update for new oe-core
    [dreambox] commit d98bfe2940385dc4885f1c034bd33aaf5c0f767a breaks download
    Update xtrendalliance.conf
    [core] fix some packages for single build.
    [dm800] kernel config remove CONFIG_AUTOFS_FS to fix problem issue with CONFIG_AUTOFS4_FS
    [cube] kernel config remove CONFIG_AUTOFS_FS to fix problem issue with CONFIG_AUTOFS4_FS
    [formuler] wlan drivers rt2800 use kernel
    [3rd-party plugins] Update
    fix typo last commit
    add support for formuler F1
    [plugins] fix builds for latest oe-core.
    [3rd-party-plugins] fix build.
    [nou] fix build warning.
    [blue-hd] fix build warning.
    [blue-hd] fix build warning.
    [nou skins] split into separate bb's.
    [enigma2-display-skins] fix build for new oe-core.
    GBQuad/GBQuadplus/800UE Plus/800SE Plus ============= improved demux as follows: - support 128 PID channel for dvb-si. - support 512 PID channels - support ts recodings up to 16 channels by hw, more channels by sw. - support ts streaming up to 16 channels with webif or vlc player.
    [libcda] fix build for new oe-core.
    [apr] bump PR.
    Fix installation
    [openvix] switch to single build environment. (new makefile required)
    openvix: build 000
    [core] fix builds for latest oe-core.
    [3rd-party plugins] Update
    [3rd-party plugins] Deleted ET-Weblinks, as they have not been maintained and no longer work.
    opendrox branding 2
    opendroid branding 2
    [3rd-party plugins] Update
    [iptvlistupdater] revert previous commit, as it brakes install depends.
    [vuplus] fix install.
    [core] updates required for latest core merge.
    [ocram-picons] update conf for new feed location.
    Update enigma2-plugin-extensions-iptvlistupdater.bb
    fix depend
    [vuplus hbbtv] workarounds for issues introduced off late. (thanks PLi)
    [hbbtv] fix play state error on VOD.
    Merge pull request #53 from beyonwiz/2.1
    [autofs] Specify location of maps.
    [HDx] Updated driver
    [libdca] Depend on quilt-native and move the patching to a later point  (thanks st7TEAM)
    [python-pyamf] fix license in bitbake, stop warning.
    [openvix] bump bootlogo.






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  2. The Following 20 Users Say Thank You to Larry-G For This Useful Post:

    + Show/Hide list of the thanked

    Alanp (28-05-14),copex (31-05-14),crackajack (27-05-14),evesham (28-05-14),farray (16-11-14),gspannu (27-05-14),Joe_90 (27-05-14),kiwiz (27-05-14),LELO_05 (28-05-14),mao (27-05-14),Meedmo (31-05-14),momayaz (03-06-14),MrKappa (30-05-14),pac2000 (27-05-14),redrum (27-05-14),seame (27-05-14),topilno (04-06-14),zl1dt (29-05-14),zoro25 (27-05-14)

  3. #2
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 003 AVAILABLE NOW







    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 908
    [WOL] add missing import.
    openvix: build 907
    add Vu Solo SE machine support.
    [EpgSelection] fix possible BSOD.
    Merge remote-tracking branch 'pli/master', skip some stuff
    Once a channel is considered to be encrypted keep it flagged encrypted
    Fix servicescan summary screen for et10k/VU-Duo2 display
    SystemInfo/UsageConfig: optimized some more code
    Make wake-on-LAN configurable from the enigma2 user interface
    [Translations] NL update
    Update de.po
    Standby: for now I poll each 10 minutes for a tuner in use
    Standby: do not timeout to deepstandby when a tuner is in use

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 003
    [xtrend] et8k and et10k update drivers 31.5.2014
    [wifi] Fix gcc 4.9.0 errors for kernel > 3.13.0
    [formuler1] update linux sum
    [gbipbox] add first test driver
    update feeds
    update version distro
    [hd2400] update kernel
    [samba] fix missing depend.
    Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2
    [3rd-party plugins] Deleted TMBD-Info as being incompatible.
    Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2
    [3rdparty] update
    [oe-a-plugins] add missing depends.
    [core] remove some packages from layer, as newer versions are in oe-core.
    [busybox] add mpstat
    [3rd-party feed] Fixed TS-Media
    [OpenXTA] Add pli hd skin to distro feed
    [hd2500} update kernel source and drivers 31.05.2014 Reset ethernet phy Fix remote controller repeat
    [3rd-party plugins] Deleted VCS drom the general bb, as it is not compatible with all images. Teams who want to keep it on their feeds should add it to their own distro bb.
    [libungif] fix missing depends.
    [libungif] remove from layer as 4.1.4 is in oe layer.
    [djmount] fix build.
    [swf] update distro
    add gbipbox support
    [dreambxo] add 	kernel-module-autofs4 to image
    [oe-core] fix for core submodule update.
    [transmission] add missing files to package.
    openvix: build 002
    [blackbox] update drivers 23.5.14, fix record issues
    [odin] add more files for splitting m7 model
    [odin] add missing files
    [odin] add missing files
    [3rdparty] update
    [odinm7] splitt model ax-odin from m7 models odinm7s for sat model and odinm7c for cable model now we have 3 drivers for m7
    [3rdparty] update
    {3rdparyte] ERROR: QA Issue: enigma2-plugin-extensions-tsmedia-oe2.0 is listed in PACKAGES multiple times, this leads to packaging errors.
    [tuxtxt] fix build
    [Opendroid] New Spinner
    [Opendroid] changed Bootlogo
    [Opendroid] Rename Distro
    removed 3rdparty-plugins
    Add support for different transparency in menu and teletext
    [3rd-party plugins] Update
    [openatv] add supportchannel plugin
    [odin] small fix attach ubi1_0 not mount from kernel now we fix it with the script
    [odin] fix odinm7 backup format ubi now use 2
    [3rd-party plugins] Update
    [enigma2] fix or-core log in About.
    FIX INI build
    [inihdp] add broken hdp kernel
    update conf
    [dags] 7335 update drivers 27.05.2014
    [3rd-party plugins] Update
    [OpenXTA] Change feed
    [3rd-party plugins] Update
    [3rd-party plugins] Update
    [INI] 8723a driver only use fo HDp
    Merge branch '2.2' of https://github.com/oe-alliance/oe-alliance-core into 2.2
    Update enigma2-plugin-skins-odin-hd-metrixlite.bb
    Update odinsupport-enigma2.bb
    Update odinsupport-bootlogo.bb
    Update odinsupport.conf
    [odinm7] fix backup mtd partition to mtd2
    [3rd-party plugins] Update
    updating transmission to 2.83
    [3rd-party plugins] Update
    [3rd-party feeds] Correction
    add livestreamer to feed
    [openatv] add enigma2-plugin-extensions-specialjump
    [OpenXTA] Using custom RcModel.py
    [OpenXTA] Set distro version to 3.0






    Images can be downloaded directly from the OpenViX server ( Link Below )

    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  4. The Following 10 Users Say Thank You to Larry-G For This Useful Post:

    bandit148 (04-06-14),belvoir (22-04-15),Eragon (04-06-14),keithccr (05-06-14),mcquaim (04-06-14),MrKappa (08-06-14),msb (11-06-14),nsw9154 (04-06-14),vmax (04-06-14)

  5. #3
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    please see the following thread for details on how to flash Build 003.

    http://www.world-of-satellite.com/sh...l=1#post294782
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  6. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    kiwiz (04-06-14),mcquaim (04-06-14),vmax (04-06-14)

  7. #4
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    The Image feeds have been set to unstable due to a issue with build 004 and the failure of build 005 to fully build, the feeds will be restored when we have fixed this issue but please be patient as this may take a day or two as Andy has to trash the build server and start from scratch again.

    I will post full changelogs for build 004 upwards as soon as the next build is made available.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  8. The Following 8 Users Say Thank You to Larry-G For This Useful Post:

    abu baniaz (11-06-14),bassethound (11-06-14),DaMacFunkin (14-06-14),duoduo (11-06-14),kiwiz (11-06-14),snoopy2013 (12-06-14),vmax (11-06-14)

  9. #5
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 008 AVAILABLE NOW







    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 913
    [UsageConfig] fix WakeOnLan config.
    [EventName] fix bad pli merge.
    [NetwrokSetup] fix BSOD.
    openvix: build 912
    [GBQuadPlus] display update. [thanks fat-tony]
    Merge remote-tracking branch 'pli/master'
    [AVSwitch] only list HDMI for TM-Nano2-Super.
    [InfoBarGenerics] add HDMI-IN support for inihdp box.
    [MovieList] slight tweak to centre title text, as requested by Rossi.
    [GBQuadPlus] display update. [thanks fat-tony]
    openvix: build 911
    openvix: build 910
    Move old style zap controlling below channel list cursor behaviour
    Solve typo's in latest setup.xml regards old style remote controlling
    Add new feature for old style remote controlling
    Do not hide PIP in PIG but stop it instead
    For LCD screen for ET10K/VUDUO use font not depending on skin
    openvix: build 909
    [TrashCan] fix possible BSOD.
    [GigaBlue Quad Plus] tweak LCD skins.
    [InfoBarGenerics] add FAV button to open bouquets.
    ChannelSelection: Solve incorrect references of services
    Fixed SIB time-out.
    Corrected URL-WoS
    PictureInPicture: also set mainscreen in bigpig and external
    PictureInPicture: ensure external PiP is always full screen
    PictureInPicture: cleanup some code
    Add new SystemInfo key PIPAvailable
    PictureInPicture: define resonable default coordinates
    whitespace fixes
    Make the hiden PiP when in Pig a bit larger
    Optimize hide PiP when in PiG
    Directly fallback to current service when previous PiP service is not possible
    When previous PIP service is not playable make it None
    Start previous PIP service when available
    Avoid GSOD when opening PIP setup when PIP was opened not the first time
    Hide PIP when we have a PIG screen
    Show current PiP mode in PiPSetup
    Revert "PiPSetup: Indicate the current PiP mode"
    PiPSetup: Indicate the current PiP mode
    In standby also stop the PiP
    Simplify the inactivity and sleeptimer
    SleepTimerEdit: save new exclusion goto deepstandby timeout configs
    Add blocktime for going to deep standy after a while in standby
    Fix the same ONID/TSID (0x0070/0x0008) on Eutelsat W7 36.0E 12174L and 12284R
    PIP: Add new side by side mode that keeps aspect ratio
    Use the new eVideo full screen config functions for PiP
    eVideo: remove the small zoom in
    eVideo: make full screen video position configurable
    Revert "Update Latvian translation"
    Update Latvian translation
    add missing string in french translation.
    Screensaver: I hope the latest finetuning
    [lcd] force no display for 'tmnano2super'
    NetworkSetup: only save wakeOnLAN config when feature exists
    Only adjust PIP locations when it is really required
    add support for uk cable epg
    PiPSetup: get initial PIP position from config
    Improve anniversary icon on screensaver
    PictureInPicture: avoid GSOD on specific hardware
    [display] add display for quad plus, this is just a copy of 220 it will need adjust properly.
    [EPGCache] add some config option for Virgin EPG.
    Changes in InfoBarGenerics to correctly switch new PIP modes
    Introduce different PIP types

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 008
    [base-image] timezones remove duplicate.
    [base-image] add few more timezones.
    [dags] Kernel should be built for machine arch.
    [3rdparty plugins] updated for ini #3
    [3rdparty plugins] updated for ini #2
    [3rdparty plugins] updated for ini
    [gstreamer] rtmp-seeking not working revert to 3bd8cf88aa4b9661e
    [3rd-party feeds] Update.
    [hd2400]
    openvix: build 007
    [3rd-party feeds] Update.
    [dags] shutdown fix conflict.
    [dreambox] dm500hd to big optimise defconfig
    [axas-support] update dgcrypt
    Update enigma2-nou-skins.bb
    [axas-support] switch to 4.1
    Change bootlogo
    [3rd-party feeds] Update.
    [3rd-party feeds] Update.
    [libmikmod] rename due to core update.
    [dags] use own package for shutdown.
    Update enigma2-plugin-extensions-iptvlistupdater.bb
    openvix: build 006
    Update enigma2-nou-skins.bb
    [INI] Fix typo
    [HDE] branding update
    [HDE] just machine conf...rest will come when will be ready
    [3rd-party feeds] Update.
    [Bootlogo] update opendrox
    [openatv] update wm2014 bootlogo
    [INI] updated mtd patch
    [INI] added missing patch, not sure why it was not here
    openvix: build 005
    [autoconf] add patch autoheader-nonfatal-warnings.patch
    [libdca] fix build error.
    [tzdata] rename as new core uses 2014d.
    Revert "[OpenXTA] Change feed"
    Merge pull request #56 from p1ngb4ck/patch-2
    Create em28xx-delock61959-rc.patch
    Merge pull request #55 from p1ngb4ck/patch-1
    Create em28xx_add_ub425_61959.patch
    openvix: build 004
    [oe-alliance-base] add some missing timezones to image.
    Update enigma2-plugin-skins-blue-hd.bb
    [dm800] fix drivers for gcc 4.9.0
    [gigablue quad,quadplus] remove network tweaks as they seem to cause problems on transfering big files
    enigma2.bb bump PR
    * [libungif] fix missing depends
    [Bootlogo] Update Opendroid
    [cube] update driver 6.6.2014
    update recipes-distro and conf opendrox (Test)
    update splash
    [dreambox] fix kernel patch sum
    [3rd-party plugins] Update
    linux-dreambox-3.2: update to 3.2.59, add needed change for dreambox-dvb-modules >= 20140603
    [3rd-party plugins] Update
    remove isettings plugin
    update bootlogo opendroid 4.1
    [odinm7] update drivers , fix issue with sd channels
    [dreambox] forget one file to commit
    [3rd-party plugins] Update
    edit recipes distros opendroid
    add autosettings and remove isettings
    [ofgwrite] bump version.
    add isetting plugin
    update dreambox hardware drivers for dm7020hd and dm8000 - optimized CI detection for some CIs - added support for container aspect ratio override (e.g. MKV) - check (HDMI/DVI) audio formats on every hotplug event   (this fixes sometimes broken AC3 audio passthrough after bootup) - fixed possible crash on driver initialization - optimized interrupt handling code a bit
    [odin] ax-odin sat update drivers 03.06.2014
    [legacykernel] dont build nigma2-plugin-systemplugins-wirelessaccesspoint
    [HDe] Fixed OSD Pisition in 1080p mode
    modified conf opendrox
    [oe-alliance-base] add missing Europe TZDATA.
    [gigablue] gbipbox use same drivers like plus model
    [hd2400 and formular] update kernel build for gcc 4.9






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  10. The Following 13 Users Say Thank You to Larry-G For This Useful Post:

    + Show/Hide list of the thanked

    herman2709 (25-06-14),Joe_90 (18-06-14),korn (19-06-14),mcquaim (17-06-14),miquelcamps (20-06-14),mitschke (21-06-14),momayaz (17-06-14),naveh (19-06-14),norhap (18-06-14),potterson (18-06-14),Pugwash (20-06-14),Sicilian (19-06-14),superHHZ (24-06-14)

  11. #6
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 012 AVAILABLE NOW













    OpenViX Apollo-Enigma2 GIT CHANGELOG





    Code:
    openvix: build 917
    [ScanSetup] fix typo.
    InfoBarGenerics: Only remember lastPiPService for a minute
    [SystemInfo] tweak 'HasExternalPIP' detection.
    [PluginBrowser] fix feed state detection.
    [ServiceName] add auto detection for service reference from Movie files, this will allow picons to be shown in MoviePlayer infobar.
    [MovieInfo] add service ref to convertor.
    [lcd] ios300hd does not have LCD.
    [SystemInfo] add ET6500 to ignore list for external PiP support.
    [Picon] tweak scale code, hopefully better support for 24bit picons.
    [PictureInPicture] some fix required for GB.
    [SoftwareUpdate] fix feed status check.
    [Translation] ET-update, thanks rimas!
    [GBQuadPlus] VFD-display tweak.
    [Translations] NL-update
    [GBQuadPlus] VFD-display tweak.
    [GBQuadPlus] VFD-display tweak.
    [merge] fix errors
    openvix: build 916
    [NTP] fix syncing.
    Merge remote-tracking branch 'pli/master'
    Add option that can configure CH+/-, B+/-, P+/- buttons for zapping
    openvix: build 915
    Simplify stop PiP in some plugins
    Standby: Simplify some code to stop PIP when going in standby
    ScanSetup: simplify some code to stop the PIP before scan
    Ensure that PIP proc is made visible even when PIP does not exists
    Move the eTimer out of the PictureInPicture Screen class
    optionaly stop previous broadcasted service on return to movielist in movieplayer
    servicemp3: seek on keyframes.
    added option for delete movie and return to playlist in movieplayer
    Rename some keys to make the code a bit better readable
    openvix: build 914
    Use visible proc when available to hide PIP when PIG is displayed
    Add servicelist cursor behaviour status to helpmenu for zap buttons
    Update de.po
    [SystemInfo] fix small typo.
    Auto hide showpip message after initated or zapped
    Solve toggle pipzap when pig skin is used
    Solve a small mistake in the help of the zap buttons
    fix possible gsod when missing files with defined frequencies, cosmetic - rename value name region to nim, fixed whitespace
    Use new function option in HelpmenuList for old style zapping
    Add option in HelpMenuList that also a function can be used.
    With PIP button toggle normal pip -> pip zap -> pip off
    Corrigate Help when shitching between old style and enigma2 style zapping
    update cs.po
    About.py: Solve a typo retreived -> retrieved
    Avoid GSOD when exit PIP in PIPZAP when using a PIG skin



    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 012
    Update enigma2-plugin-skins-mynovumhd2.bb
    [blackbox] update flash for oem build
    [blackbox] update flash size
    [swf] fix generate nfo
    [swf] fix typo
    [octagon] update feed
    [3rdparty]  renome enigma2-plugin-systemplugins-lcnscanner then other disto need this add to privat 3rdparty
    [xtrend] et8k and et10k update drivers 17.6.2014
    [3rd-party feeds] Update.
    update recipes-distros opendroid
    [libcheader] fix fix_kernel_build_xargs 3.9.7 build on newer build server
    [GigaBlue] update initrd.bin - 2nd add missing updated gb800seplus.conf and gb800ueplus.conf
    [GigaBlue] update initrd.bin Requires new Bootloader to make use of it. Old Bootloader simply ignores those files.
    [3rd-party feeds] Update.
    [3rd-party] bump PR, as openvix needed a rebuild and trash tmp folder destroyes deploy folder.
    openvix: build 011
    openvix: build 010
    [3rd-party] bump PR
    recipes distros update
    [enigma2-tuxtxt] fix patch file.
    [DVB-USB] it913x depends for newer kernels then 3.12 >
    [enigma2-tuxtxt] fix patch file.
    Update enigma2-nou-skins.bb
    Update enigma2-plugin-skins-red-hd.bb
    add myNovum2 to feeds
    [myNOVUM_HD2] add new skin to oe-a feeds
    openvix: build 009
    [gigablue] bump PR of gigablue-dvb-modules.inc due to change in ddbootup
    [gbquad, gbquadplus] disable all ddbootup tweaks
    [dags] update drivers 18/19.6.2014
    [gigablue] quad add option -F --space-fixup
    Revert "[gigablue] quad update kernel config stops boot issues"
    [3rd-party feeds] Update.
    Bump PR enigma2.bb
    [gigablue] quad update kernel config stops boot issues












    Images can be downloaded directly from the OpenViX server ( Link Below )




    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6




    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here




    OE-ALLIANCE GIT-CHANGELOG
    Click Here




    Some softcams now available from the image feeds, with more to follow.




    OpenViX-IMAGES
    Click Here




    OpenViX-CAMS
    Click Here




    OpenViX Tutorials
    Click Here




    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  12. The Following 4 Users Say Thank You to Larry-G For This Useful Post:

    Eragon (27-06-14),mcquaim (27-06-14),MrKappa (29-06-14),vmax (27-06-14)

  13. #7
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Please note.

    If you are using a Image prior to build 008, we recommend a reflash via USB or via the inbuilt Image manager, if you are on build 008 you should be fine using the online updates or update via a telnet session.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  14. #8
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 014 AVAILABLE NOW



    OpenViX Apollo-Enigma2 GIT CHANGELOG


    Code:
    openvix: build 919
    [SystemInfo] fix 'WakeOnLAN' syntax.
    [GBQuadPlus] VFD-display tweak.
    [SystemInfo] add missing import.
    [PluginBrowser] hide waiting text when list compile is complete.
    [SystemInfo] 'WakeOnLAN' tweak syntax.
    openvix: build 918
    [SystemInfo] 'WakeOnLAN' gbquadplus does not yet support it, so disable support for now.
    [SystemInfo] remove machine check in 'HasExternalPIP' as proc does not exist anyway.
    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 014
    [Red-HD] update to v1.3
    [3rd-party feeds] Update.
    [myNOVUM_HD2] update to v3.0
    [myNovum, Nou and Novum] update to v7.0
    [inihde] add micon Updater
    [hd1100] fix drivers sum
    [formuler] add support formuler3 update drivers formuler 1
    [dreambox}] add missing files for new dvdburn plugin
    Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2
    add bdremux
    openvix: build 013
    [openvix] tweak DEPLOY_DIR.
    [Red-HD] update to v1.2
    [dm800se] revert kernel config to last rev
    [dm500hdv2] revert kernel config to last rev
    [dm7020hd] revert last kernel config change
    [dm800hd] fix kernel bootup on first rev off the model
    [dm800sev2] fix kernel boot issues
    [dm800sev3] update config forget LZO
    [dreambox] add module load nfsd, exportfs fuse
    [dreambox] update kernel configs
    [GigaBlue] update initrd.bin
    [openvix] testing new cache location, hopefully fixes some PRServer issues, now all machine share the same 'prserv.sqlite3' database file.  (REQUIRES NEW MAKEFILE)
    [dreambox] update drivers 16.06.2014 7020hd,500hd, 500hdv2, 800se, 800sev2
    [dreambox] update blindscan-utils 1.9
    Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2
    [dreambox] update to kernel 3.2.60
    [myNOVUM_HD2] update to v2.4
    [myNovum, Nou and Novum] update to v6.4
    fix dvb-usb Realtek RTL2832 bb for different kernels thanks athoik
    [hd2400} revert kernel config
    [skylake] update drivers and config
    [3rd-party feeds] Update.
    [en7356] fix typo
    [xtrend] Update drivers 24.6.2014 et8k/et19k
    [dags] update drivers 26/27.06.2014
    [en7385] rollback patch rtl28xxu
    [Red-HD] update to v1.1
    [Blue-HD] update to v3.1
    add driver plugin for dvb-usb  Realtek RTL2832
    Update enigma2-nou-skins.bb
    [3rd-party feeds] Update.


    Images can be downloaded directly from the OpenViX server ( Link Below )

    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here

    OE-ALLIANCE GIT-CHANGELOG
    Click Here

    Some softcams now available from the image feeds, with more to follow.

    OpenViX-IMAGES
    Click Here

    OpenViX-CAMS
    Click Here

    OpenViX Tutorials
    Click Here

    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  15. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    dikkidave (01-07-14),mcquaim (01-07-14),vmax (01-07-14)

  16. #9
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Please note that build 013 and 014 require a reflash and can not be updated online, we understand and appreciate this may inconvenience some of our users but it is necessary to maintain image stability.

    You can reflash with either a USB stick or use the inbuilt image manager and you can still use a settings backup from a previous Apollo series OpenViX image
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  17. The Following 9 Users Say Thank You to Larry-G For This Useful Post:

    cwebb66 (01-07-14),dikkidave (01-07-14),duoduo (01-07-14),invisiblelayer (02-07-14),MrKappa (03-07-14),mrxbox360 (01-07-14),s1m0nw (01-07-14),vmax (01-07-14)

  18. #10
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 015 AVAILABLE NOW





    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 920
    [GBQuadPlus] VFD-display tweak.

    OE-ALLIANCE GIT CHANGELOG

    Code:
    
    [3rd-party feeds] 
    openvix: build 015
    [3rd-party feeds] Update.
    [GigaBlue] add kernel 3.14.2 for GB800SEplus, GB800UEplus, GBQuad, GBQuadplus, GBIPBox no switch yet to kernel 3.14.2!
    [axas] change Branding name E3HD-C
    [3rd-party feeds] Update.
    [GigaBlue] fix md5sum
    [GigaBlue] update drivers & defconfig to fix Bootcrash for GB800SEplus, GB800UEplus, GBQuad, GBQuadplus, GBIPBox
    [3rd-party feeds] Update.
    [vsftpd] add missing file vsftpd.ftpusers
    [gigablue} fix mem allow page issues
    [dags] add oem worldvision force 1
    [inihdx] fix mem page alloc issues
    [INI] Kernel configs updates
    add odinm7 oem GalaxyM6
    [INI] Updated wifi drivers
    [INI] Updated Kernels for HDe, HDe2, HDp and HDx
    [vuplus] transtreamproxy add missing depend, to fix possible bb compile failure.
    [3rd-party feeds] Update.
    [beyonwiz] Update distro
    remove tux
    edit recipes-distros opd
    addedded extraPanel Opendroid
    addedded extraPanel Opendroid
    Update Beyonwiz distro
    Update Beyonwiz distro




    Images can be downloaded directly from the OpenViX server ( Link Below )

    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here


    Please note.

    Due
    to an OE-Alliance issue we're very sorry to have to advise that Apollo Build 015 once again require's a flash and settings backup restore. We fully understand and apologize for any inconvenience this may cause but this is a matter not of our making and out of our hands.

    Also be aware that Images for, Venton, Miraclebox or GI XPEED, Have undergone a Linux kernel and driver update.


    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  19. The Following 2 Users Say Thank You to Larry-G For This Useful Post:

    vmax (09-07-14)

  20. #11
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 019 AVAILABLE NOW





    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 924
    openvix: build 923
    openvix: build 922
    [lcd] fix crash waking from standby.
    [lcd] fix crash entering/waking from standby.
    openvix: build 921
    [oem] clean up code for Ultimo LED button control.
    [oem] clean up code for Xtrend's blue power button control.
    [oem] add LCD video support for GigaBlue that have hardware to support it.

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 019
    [3rd-party feeds] Update.
    [openatv] image version build for MACHINEBUILD
    [feeds] bump PR, tweak.
    openvix: build 018
    [3rd[party] bump to rebuild feeds.
    [dags] update drivers all models 11.07.2014
    [formulerf3] add ledcontrol
    [channel-settings] fix for feeds.
    openvix: build 017
    [channel-settings] force rebuild.
    [3rd-party feeds] Update.
    openvix: build 016
    [blackbox] update drivers and kernel config
    [channel-settings] fix bb as ziggo-casema-weas files have been removed.
    [GigaBlue] update drivers GB800SEplus, GB800UEplus, GBQuad, GBQuadplus, GBIPBox * Fix framebuffer (improve menu speed) * Fix framerate Multi * Fix /proc/stb/lcd/mode 0=default
    [3rd-party feeds] Update.
    Deleted package from meta-settings
    [Channel-settings] fix previous commit, meta package is built for ALL package type not per machine, if team's want to hide settings on a per box basis, anther way of building settings needs to coded.
    Corrected the channel settings. Please remember that this feed is brand/box independant; adding a brand breaks the building of the feeds..
    [GigaBlue] update defconfig 3.14.2 for GBQuad, GBQuadplus
    [GigaBlue] update drivers GBQuad, GBQuadplus * Fix framebuffer (improve menu speed) * Fix framerate Multi
    [3rd-party feeds] Update.
    Update linux-gigablue_3.14.2.bb
    [GigaBlue] change patches 3.14.2 No switch yet to kernel 3.14.2!
    [GigaBlue] add defconfig 3.14.2 for GBQuad, GBQuadplus no switch yet to kernel 3.14.2!
    [HDp] fix O/U 3D format problem
    [Red-HD] update to v1.6
    [en7358] fix mtd partitions
    [3rd-party feeds] Update.
    Merge branch '2.2' of https://github.com/oe-alliance/oe-alliance-core into 2.2
    Bump egami base files
    [Red-HD] update to v1.5
    Merge pull request #58 from athoik/nanddump-truncate
    nanddump: Truncate empty blocks (FF) from dump
    [Beyonwiz] preinstalled plugins updates
    update distro and conf opendrox Test
    [HDe] Fix online kernel updates
    [HDe] Fix mtd partition
    [Red-HD] update to v1.4
    [3rd-party feeds] Update.
    [3rd-party feeds] Update.
    [3rd-party feeds] Update.
    [myNOVUM_HD2] update to v3.4
    [myNovum, Nou and Novum] update to v7.4




    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here

    OE-ALLIANCE GIT-CHANGELOG
    Click Here

    Some softcams now available from the image feeds, with more to follow.
    OpenViX-IMAGES
    Click Here

    OpenViX-CAMS
    Click Here

    OpenViX Tutorials
    Click Here

    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  21. The Following 5 Users Say Thank You to Larry-G For This Useful Post:

    bandit148 (13-07-14),cwebb66 (19-07-14),keithccr (16-07-14),scouse645 (13-07-14),vmax (13-07-14)

  22. #12
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Please note.


    The Image feeds have temporarily been set to unstable while we investigate a issue with the Vu+ Ultimo which has resulted in at lease one case of a bootloop, although this has not been observed or reported on any other receiver, so please make a backup first.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  23. The Following 6 Users Say Thank You to Larry-G For This Useful Post:

    bandit148 (13-07-14),bjolly (13-07-14),cwebb66 (19-07-14),Sicilian (14-07-14),ukbob (13-07-14),vmax (13-07-14)

  24. #13
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Apollo 022 AVAILABLE NOW





    OpenViX Apollo-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 927
    [lcd] fix setLEDstandby.
    Update de.po
    openvix: build 926
    openvix: build 925
    [lcd] fix BSOD on ultimo.
    [Translations] NL-update

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 022
    [rtl8192cu] add version 4.0.2
    Removed WC bootlogo
    [ebox7358] update kernel update drivers 17.7.2014 * speed up over 50% * add 1080P modes
    [gbipbox] add initrd.bin
    [spinner] update opendroid
    [Bootlogo] update opendroid
    [GigaBlue] update defconfig 3.12.1 add missing SMSC75XX needed for GigaBlue GigaBit-Lan Adapter
    [pyhton]fix issue with process then parend is empty
    [myNOVUM_HD2] update to v5.5
    Merge pull request #60 from p1ngb4ck/patch-3
    Update mozjs_24.2.0.bb
    Merge pull request #59 from p1ngb4ck/patch-2
    Create fix-cross-compile.patch
    add new oem quadbox hd 2400
    openvix: build 021
    [picons-enigma2-meta] fix for feeds.
    openvix: build 020
    update bootlogo and splash opendroid
    [GigaBlue] update defconfig 3.14.2 GB800SEplus, GB800UEplus, GBIPBox
    [openatv] update bootlogo
    [GigaBlue] update defconfig 3.14.2 for GBQuad, GBQuadplus
    [dvb-usb] af9015 update bb for different kernel version
    [dvb-usb] add missing files for af9035 referenz model Stick
    [3rd-party] fix bitbake.




    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Apollo-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  25. The Following 8 Users Say Thank You to Larry-G For This Useful Post:

    Alanp (20-07-14),angelito (23-07-14),bandit148 (20-07-14),cwebb66 (20-07-14),dikkidave (20-07-14),Newbie2 (02-08-14),ser6 (20-07-14),vmax (20-07-14)

  26. #14
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Plugin feeds are not offline !!.


    Just to let users know the plugin feeds are not offline at this moment in time, there is currently a issue with the ocram picons download server which has caused issues with the OpenViX plugin feeds, to get around this for the time being just FTP into /etc/opkg/ and delete or rename the ocram plugins feeds.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  27. The Following 8 Users Say Thank You to Larry-G For This Useful Post:

    cwebb66 (29-07-14),Hannaman (29-07-14),mhoobag1 (28-07-14),nipperlocko (02-08-14),patchy (29-07-14),Sicilian (28-07-14),Tecky138 (30-07-14),vmax (28-07-14)

  28. #15
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    Quote Originally Posted by pheonix View Post
    Plugin feeds are not offline !!.


    Just to let users know the plugin feeds are not offline at this moment in time, there is currently a issue with the ocram picons download server which has caused issues with the OpenViX plugin feeds, to get around this for the time being just FTP into /etc/opkg/ and delete or rename the ocram plugins feeds.

    Just a update on this,

    The feeds have now been taken off line while build 023 is being uploaded as it needs to be checked due to a earlier attempted build failing
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

Page 1 of 5 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.