Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: OpenViX Helios Updates and Changelogs.

  1. #1
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    OpenViX Helios Updates and Changelogs.



    OpenViX Helios build 003 is in the process of being built but has been classified as unstable due to a Enigma2 bootloop as the result of a error in the InfoBarGenerics file.

    Due to this bootloop we have classified this as a URGENT bug and advise that you not update for the time being, we will notify you further when it is ok to update, very likely later today.



    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  2. The Following 7 Users Say Thank You to Larry-G For This Useful Post:

    Audiogod (21-04-14),bandit148 (21-04-14),cwebb66 (21-04-14),escu29 (22-04-14),geowds (19-08-14),nipperlocko (03-05-14),Sicilian (24-04-14)

  3. #2
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,247
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    But if you happened to update, you can fix that issue by unzipping the attached file to
    /usr/lib/enigma2/python/Screens
    Attached Files Attached Files
    Last edited by abu baniaz; 21-04-14 at 18:46. Reason: copied post

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  4. The Following 3 Users Say Thank You to Rob van der Does For This Useful Post:

    alan1812 (22-04-14),Audiogod (21-04-14),Sicilian (24-04-14)

  5. #3
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 004 AVAILABLE NOW





    OpenViX Zeus-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 892
    [InfoBarGenerics] fix typo.
    openvix: build 891
    [MovieList] check for write access before creating Trashcan.
    Merge remote-tracking branch 'pli/master'
    fix change log
    openvix: build 867
    use channel/frequency option in dvb-t for single transponder only
    Satconfig: small change required for the new 64 LNBs feature
    Merge commit 'f379adc2e0b18d9322ac16d5492dd8453ac36fc0'
    Standbyled proc uses on/off instead of yes/no
    NimManager: Second try to solve the rotor issue after adding 32 LNBs
    [FastScan] do no enable autoscan as default, should be user choice.
    [trashcan] fix issue with autofs.
    added rotated line around origin into canvas
    Merge remote-tracking branch 'pli/master'
    Fix AvSwitch
    Add aac_transcode to av-settings
    NimManager: we have now 64 satellites, so declare an extra 32
    Add option to change behaviour of power LED (ET8K/ET10K)
    [Translations] NL Update.
    openvix: build 890
    MovieSelection: remove more screensaver stuff
    Revert "Add screensaver to MovieSelection for playing MP3s"
    Screensaver: change to a screensaver that ask less resources
    freesatv2.cpp: Fix unsigned/signed char errors
    eptrlist.h: Fix compilation error on unqualified 'insert'
    NimManager: make not available translatable
    NimManager: try to allow 64 sat positions
    encoding.conf: add fallback encoding for 'ell' (Greek)
    [AVSwitch] fix incorrect syntax.
     [AVSwitch] allow to change videomode for giga plus boxes (with new driver)
    [UsageConfig] do not disable Alpha support for other brands than vuplus.
    Correctly refocus to next to played service
    Solve a debug code I used to test the screensaver
    Add screensaver to MovieSelection for playing MP3s
    Small obtimalizations to InfoBarScreenSaver
    [StbHardware] add needed RTC check for INI.
    [dvbtime] try to fix a few issue with older GB model and timers.
    [infobar] fix issue with TV / Radio mode switching.
    [SoftwareUpdate] fix helios e2 log view.
    NimManager: In the previous commit I forgot to change a config
    NimManager: change default rotorpositions from 49 to 99
    [PluginBrowser] when installing a 2nd bootlogo from feed inform user that one is already installed, and give the option to remove the previous installed version.
    [PluginBrowser] stop 'meta' packages from showing.
    [opkg] fix updating, compiling lists.
    [MovieSelection] move some config option from recordings to MovieList setup.
    [MovieSelection] add confirmation question when moving a folder to trash.
    [SoftwareUpdate] fix imagever when image is '001'
    [MovieSelection] if trashcan is used, make sure it is created when open the folder/device.
    [MovieSelection] fix Move label when on folders.
    [mytest] add support for /etc/enigma2/radio.mvi
    [TimeShift] move CleanTimeshift check to run as timeshift activates, in the hopes it will stop hdd spinning up when not using AutoStart.
    MovieSelection: move selection down when playing next audio file
    [Epglist] fix possible BSOD.
    Do not show timeshift protection when no services are in the history
    [ipkg] fix typo causing BSOD.
    Small changes to the VFD display layout of VUDUO2/ET8K/ET10K
    [compile] fix build for latest oe-core merge.
    [SwapCheck] fix typo, should be < 5mb free not 50mb.
    Fastscan: Start fastscan after 90 seconds in standby instead of 10 min
    Add timeshift protection to zap to previous service with '0'
    openvix: build 889
    FastScan: Reload fastscan each 24 hours as long box is in standby
    [ipkg] fix possible BSOD.

    OE-ALLIANCE GIT CHANGELOG

    Code:
    [vuplus-opera] reverse Commit: dc12194fd9602ee3ffe8401d70a1530d85d7ebfd as it fails to start.
    openvix: build 004
    openvix: build 003
    openvix: build 002
    [vuplus-opera] update browser.
    [azboxhd] fix compile lcd.cpp
    * cleanup build remove wrong use of TARGET_FPU  this is not needed for all bcm chips this was configure in the mips-tune boxes with soft must build fresh
    [AudioEffect] only set provides for needed machines.
    [busybox] fix complie on older Kernel add upstream iplink fix
    [dm800] fix kernel install fix missing folder
    [Gigablue] enable enigma2-plugin-systemplugins-audioeffect gb800se/ue plus
    [openATV] update Bootlogo 4.1
    [gigablue] add enigma2-plugin-systemplugins-audioeffect for quad and quadplus
    openvix: build 001
    [openmips] switsch Distro to 4.1
    Update enigma2-plugin-extensions-iptvlistupdater.bb
    [gigablue - seplus,ueplus, quad, quadplus] - Update drivers FIX single sat with diseqc a FIX aac downmix with pioneer avr. ADD pcm multichannel from ac3/aac/dts. ADD aac transcode to ac3/dts. ADD audio feature    1. /proc/stb/audio/multichannel_pcm        if set enable then ac3/aac/dts will be worked multichannel pcm.    2. /proc/stb/audio/aac_transcode       if set ac3/dts then aac will be converted ac3/dts
    [dm800] update arch
    [distros] update image task after rootfs
    [xtrend] et8k and et10k update drivers 18.4.2014
    [nfs-utils] fix for older kernel, also adjust nfsserver start order.
    [distros] update image infos for new bb version
    [ntfs-3g-ntfsprogs] add util-linux to depends fix missing uuid.h header files
    [vuplus] update driver Duo2/Ultimo 20140418  - Fix DVB-S2 Single(AVL6211) tuner problem (duo2, ultimo)  - Change nim_sockets of DVB-T2 tuner (duo2)
    [gigablue - quad, quadplus] - Update drivers FIX tuner configuration mode "simple", mode "single"
    [kernel] make sure NFS is embedded into kernel.
    [3rd-party plugins] Update
    [3rd-party plugins] Update
    new splash.bin
    [odin] fix small issue drivers 15.4
    [dags] update drivers and kernel
    update wifi for ini box
    [odin] E3HD and M7 Update drivers 15.04.2014,
    [openvix] bootlogo fix typo's
    [openvix] fix bootlogo bb
    [openvix] fix softcams bb
    [openvix] fix softcams bb
    [openvix] fix bootlogo bb
    [openvix-softcams] fix bb.
    [openatv] switch distro to 4.1
    [blackbox] update drivers 11.4.2014
    [openvix] Helios release.
    [openvix] bootlogo add some additional bootlogo's.
    [openvix] bootlogo switch to new Helios logo.
    [openvix-softcams] add mgcamd138.
    [xtrend] fix preferred linux version for et8k/et10k
    [vix-core] don't overwrite exports on update.
    [oe-a-skins] add Blue-HD by Rossi
    [oe-a-skins] update fro new locations.
    [gigablue] add initrd zu image zip file
    [gigablue - seplus,ueplus, quad, quadplus] - Update initrd.bin initrd.bin - shortinfo: * requires new bootloader (CFE) - will be released shortly * CFE checks if initrd.bin is available in gigablue/{machine}/initrd.bin    * If yes, CFE loads initrd.bin and flashes image using USB 2.0 instead of 1.1    * If no, CFE flashes image normally using USB 1.1 * Old bootloaders do not check existence of initrd.bin - so it does not harm if shipped in image, just no effect then
    [openvix] bootlogo fix bitbake.
    [gigablue - seplus,ueplus, quad, quadplus] - Update drivers
    [dreambox] update kernel patch sum
    [netatalk] fix warning message.
    [transmission] fix typo.
    [openvpn] fix debug warning message.
    [openvix] bootlogo fix bitbake.
    [openvix] bootlogo fix bitbake.
    [transmission] fix warning message about files not packaged.
    [netatalk] fix warning message.
    [openvpn] update to 2.3.3
    [inadyn-mt] update to v.02.24.38
    [OpenXTA] Fix image build with new build env
    [openvix] prepare support for bootlogo packs.
    [layer] Set ver to 2.1
    Revert "[feeds] do not build MediaTomb for feeds as it does not compile."
    Fix build of mediatomb
    Fix configure error
    [filesystems] update ntfs-3g-ntfsprogs to 2014-02-15
    [dreambox update kernel to 2.3.56 [dm8000] update drivers 20140314
    [openvix] softcam mgcamd fix checksum.
    Merge remote-tracking branch 'origin/branding' into 2.1
    [feeds] do not build MediaTomb for feeds as it does not compile.
    remove addonopendroid
    [core] updates for Oe-Alliance version 2.1
    [qaud and qaudplus] change mtd to -c 4000 to fix boot stops
    changed distro and config opendroid for testings.....
    fix typo last commit
    [dags3] fix spash1-3 bmps
    [dags3] add new flash info splash1.bmp splash2.bmp splash3.bmp
    Update enigma2-plugin-extensions-iptvlistupdater.bb
    [openoam] fix indention, please make sure you follow indentation rules.
    [axassuport] fix indention, please make sure you follow indentation rules.




    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command


    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here




    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  6. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    gordyboy (22-04-14),korn (22-04-14),Sicilian (24-04-14)

  7. #4
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 006 AVAILABLE NOW





    OpenViX Zeus-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 894
    [ServiceInfo] try to read driver for information first, as GSTREAMER can have trouble reading media files (mkv, avi, etc)
    [skins] use 'IsHD' instead of detecting size.
    [Transponder] add some DebugInfo, to help with ABM DVB-T
    openvix: build 893
    [VideoMode] only show AutoRes label when AR is enabled.

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 006
    openvix: build 005
    [vuplus-opera] reverse Commit: dc12194fd9602ee3ffe8401d70a1530d85d7ebfd as it fails to start.




    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command


    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here




    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  8. The Following 10 Users Say Thank You to Larry-G For This Useful Post:

    alan1812 (24-04-14),cwebb66 (23-04-14),Eragon (23-04-14),escu29 (23-04-14),huey45 (23-04-14),lscolman (24-04-14),seame (22-04-14),Sicilian (24-04-14),starskyman (24-04-14)

  9. #5
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 007 AVAILABLE NOW





    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 895
    Merge remote-tracking branch 'pli/master'
    frontend: make plp id available in transponder data
    frontend: consider DVB-T2 plp id in transponder comparison
    enigma2.bb: inherit pythonnative
    enigma2.bb: fix indentation in populate_packages_prepend
    [ServiceInfo] fix return values.
    PositionerSetup: Solve allocating unused memory index when use USALS
    [Satconfig] Hide coordinates options if not USALS

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 007
    [vuplus] driver update (Solo2/Duo2) 20140424
    [blackbox] update drivers and kernel HDMI-cec Recording on scrambled channels PiP DVB-T Tuner improvments DVB-S2 tuner improvments RCU Acceleration and Speed
    fix SABnzbd python compileall




    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command


    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here




    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  10. The Following 4 Users Say Thank You to Larry-G For This Useful Post:

    Sicilian (24-04-14),stationx (24-04-14),vmax (24-04-14)

  11. #6
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 010 AVAILABLE NOW





    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 898
    openvix: build 897
    Merge remote-tracking branch 'pli/master'
    [Tools] Trashcan, add some debug to help find a bug.
    Update de.po
    NimManager/Satconfig: add latest suggestions from Dima73
    openvix: build 896
    Fix possible GSOD with VirtualKeyBoard when using SMS style
    NimManager: Solve another possible issue with the 64 LNBs feature

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 010
    openvix: build 009
    [e2-dvb-driver] add missing depend.
    openvix: build 008




    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command


    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here




    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  12. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    cwebb66 (26-04-14),Eragon (25-04-14),vmax (25-04-14)

  13. #7
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    As part of a server clean out the plugin feeds for no longer supported image builds have been removed, this includes all ViX 2.xx and ViX 3.0 builds, from now on only OpenViX Zeus and OpenViX Helios will have access to the official OpenViX plugin feeds.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  14. The Following 2 Users Say Thank You to Larry-G For This Useful Post:

    huey45 (28-04-14),vmax (25-04-14)

  15. #8
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 011 AVAILABLE NOW





    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 899
    [Tuner config] Add some python comments so changes aren't lost on PLi merge
    [Satconfig] Capitalise modes in nim selection screen. Change 'Loopthrough' to 'Loop through', requested by Rob.
    [Satconfig] Capitalise 'Configuration mode' options. Requested by Abu.
    [Satconfig] Confirm delete satellite: set default to 'no'. Requested by Abu.
    [Translations] NL update.
    [Satconfig] in 'Advanced' hide 'DiSEqC 1.1 repeats' when 'DiSEqC 1.1 command' is set to 'None'
    [tuner config] Move elements into a more logical order, and rename some items to make this screen more user friendly
    [tuner config] Remove 'Enable DiSEqC' from 'Simple-single'
    [NimManager] Limit committed inputs to four as per DiSEqC standard
    Possibility to skin spinner. Just make a dir YourSkinName/spinner and put there wait1.png, wait2.png.........

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 011
    [apr] update to version 1.5.1 [apr-utils] update to version 1.5.3
    [subversion] update to version 1.8.8
    [beautifulsoup] update to version 4.3.2
    [hbbtv] fix play state error on VOD
    branding update for last branding lib change
    rename visionnet to marvel1
    [visionnet] update image dir to marvel1
    changed number build and mod skin default opendroid
    [skin] pli-hd skin fix lic
    [skin] PLi-Full-HD-Night fix build
    rename opendroid feeds for test
    [3rdparty] fix build
    [pngquant] set rev to ee7bef8644ad1bac3fce2c04afef13f1ec19166b
    rename evo to entwopia-dvb-modules-ew7358.bb
    [Build] opendroid Test.
    edit skin defautl
    [3rd-party plugins] Update
    [pli-full-hd-night] fix LIC location.
    [oe-alliance-skins] remove pli-hd and add pli-full-hd-night, if you ant old pli skin for you image please add it to you dristro feeds bb.
    [3rd-party plugins] Update
    [3rd-party plugins] Update
    [3rd-party plugins] Update
    changed skin and spinner
    edit recipes-distros
    [openvpn] update to 2.3.3
    [distros] update image task after rootfs
    cleanup dead distro
    add pluginnowanted - skinsnowanted and VFD patch
    edit conf and distro opendroid
    [openpl] remove old skin plugin
    [odinsupport] update for new skin: enigma2-plugin-skins-odin-hd-metrixlite
    Update enigma2-plugin-extensions-iptvlistupdater.bb




    Images can be downloaded directly from the OpenViX server ( Link Below )

    via a online update
    menu> setup> software update.

    OR

    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here



    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  16. The Following 4 Users Say Thank You to Larry-G For This Useful Post:

    mcquaim (30-04-14),stationx (01-05-14),vmax (01-05-14)

  17. #9
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,247
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Be advised that for the VU's HbbTV is broken in build 011.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  18. The Following 3 Users Say Thank You to Rob van der Does For This Useful Post:

    cwebb66 (02-05-14),Larry-G (30-04-14),^^COMPASS^^ (30-04-14)

  19. #10
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 013 AVAILABLE NOW







    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 901
    [branding] cleanup makefile for branding, as now a lot of machines are shared.
    [TunerConfig] Revert previous commit on concensus. This is not a simple configuration item.
    Merge remote-tracking branch 'origin/master'
    [tuner config] Revert previous commit on concensus, as this is not a 'Simple' config item.
    [tuner config] Revert "Remove 'Enable DiSEqC' from 'Simple-single'" as some multi-switch setups require this
    [Satconfig] hide descendant options not related to current config, and remove a possible bug from 'Command order'
    [EpgList] add option set alignment for timeline i.e. TimelineAlignment="right"
    Update de.po
    [CommonInterfaceAssignment] fix BSOD.
    set the linux OOM score for the enigma2 process.. so the kernel first kills other processes on low memory conditions...
    Merge remote-tracking branch 'pli/master'
    openvix: build 900
    added 23.5E 12207V into encoding.conf
    added select sorting list in movieplayer from choicebox and added posibility place this under programeable button too
    UsageConfig: Optimize some code related to enigma2 imports
    Use timeout_default when changing remote control type
    Add timeout_default for sleeptimer and inactivitytimer
    MessageBox: Add timeout_default functionality
    Satconfig changes as suggested by Huevos

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 013
    [dags] driver updates:
    [dags] cleanup machine INC, and add TM-NANO 2 Super.
    edit recipes-distros opendrox for test.
    [valis-hd] fix the depend.
    [gstreamer] prevent accumulation of old cached buffers in input-selector.
    [dags] drivers update
    Added Beyonwiz distro
    [skins] fix font-valis depend.
    [python-lxml] fix build.
    [python-lxml] add missing depend.
    [python-cssselect] fix install.
    openvix: build 012
    [python-cssselect] fix lic checksum.
    [python-cssselect] add recipe.
    [subversion] degrade to 1.7.16, as 1.8.8 is not compatible with OpenEmbedded.
    [3rd-party plugins] Update
    [ixuss] update drivers 20140430 * update  Doscam support * fix scam 3.59 * fix scam 3.50 info scam 3.53 not working please use 3.59 or 3.60
    changed bootlogo
    Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1
    edit recipes-distro and conf






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  20. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    Eragon (04-05-14),vmax (03-05-14)

  21. #11
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 015 AVAILABLE NOW







    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 903
    [ServiceList] fix merge error.
    openvix: build 902
    Merge remote-tracking branch 'pli/master'

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 015
    [valis-hd] fix build.
    [valis-hd] fix build.
    openvix: build 014
    [valis-hd] fix build.
    [Beyonwiz] libcrypto fix 2
    Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1
    [Beyonwiz] libcrypto fix
    [mdev] add mmc SD Automount






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  22. The Following 4 Users Say Thank You to Larry-G For This Useful Post:

    cwebb66 (04-05-14),stationx (04-05-14),vmax (04-05-14)

  23. #12
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 016 AVAILABLE NOW







    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 904

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 016
    [openvix] update boot splash / flash instructions.
    rename version opendrox 4.1 (Test)
    rename version opendroid 4.1
    clean up some machine conf's
    [dags] fix driver URL






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Helios-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  24. The Following 7 Users Say Thank You to Larry-G For This Useful Post:

    chrcoluk (06-05-14),comadreja (08-05-14),cwebb66 (05-05-14),jools2001 (05-05-14),mitschke (09-05-14),topilno (07-05-14)

  25. #13
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts
    OpenViX-Helios 017 AVAILABLE NOW







    OpenViX Helios-Enigma2 GIT CHANGELOG



    Code:
    openvix: build 905
    Merge remote-tracking branch 'pli/master', skipped 'Satconfig.py' as Rowland maintains this.
    Correctly flag encrypted channels during service scan
    Fix picon position when scrollbar at the left side is used
    Revert "Small obtimalizations to InfoBarScreenSaver"
    Revert "Solve a debug code I used to test the screensaver"
    Do not reserve place for crypto icon when not required
    remove path info of installed packages in Install extensions and put it into screen title only. List sorted alphabeticaly.
    added sort for SelectionList and resize it from 505 to 650 for item 1
    Satconfig: added the latest suggestions from Huevos
    [Translatons] FI Update, thanks TimoJ!
    [Tuner config] Rename a couple of items and hide some less used options
    Update de.po
    added selecting behaviour on end of file in movieplayer from choicebox placed under programeable button
    fixed sort via choicebox in movieplayer for displaying selector on used sorting
    add orbital position into timer events for better identify when exist more sources
    [Sat finder] Open with 'Pre defined transponder as default', suggested by Rob.
    [Sat finder] revert 'start with predefined transponder as default'.
    [Sat finder] open with predefined transponder as default, as suggested by Rob.
    [AVSwitch] fix component colour setting.
    [TimeShift] revert the clean on TS start, as it breaks the ability to save and continue to record TS files.
    [Translations] NO update, thanks Stig-O

    OE-ALLIANCE GIT CHANGELOG

    Code:
    openvix: build 017
    [beyonwiz] updated bootlogo
    [gigablue] * changes to defconfig, because of some user experience stale on boot, this changes will ensure it don't happen
    [blackbox] update drivers 01.05.2014 Improved CI, Card Reader, recording
    [netatalk] fix files to stop warnings.
    [openoam] add missing files to stop warnings.
    [openvix] fix bootlogo build.
    [beyonwiz] version 4.1 fo oe-a 2.1
    [dags] fix SRC_URI
    [vuplus-hbbtv] revert as it still fails to start.






    Images can be downloaded directly from the OpenViX server ( Link Below )


    via a online update
    menu> setup> software update.

    OR
    Via a Telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Helios-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    Some softcams now available from the image feeds, with more to follow.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here


    Follow us on Twitter Click Here

    Follow us on Facebook Click Here
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  26. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    hullfc27 (14-05-14),hydro65 (10-05-14),vmax (10-05-14)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.