Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: Flash issue

  1. #1

    Title
    Junior Member
    Join Date
    Aug 2011
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post

    Flash issue

    Attn Mods: Could this be moved to the Vix support please as I have just clocked thats where it has to go. Sorry for the miss posting.
    Hi All,

    Flashed my TM-single with latest Vix and after the message to power off when I turned it back on I repeatedly pressed exit for 10 seconds. It then starts to load and stops at 27% i leave it for 10 minutes with no change. If I then repeat the process (not reflashing just power off and on) it stays at 40% and does not change.

    Anyone have any ideas on how to fix this issue please.

    Many thanks

    DoXe
    Last edited by doxe; 21-03-13 at 22:59.

  2. #2

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    have you anything connected to the box? hdd/usb/network cable?

  3. #3

    Title
    Junior Member
    Join Date
    Aug 2011
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    Just the network cable Judge.

    DoXe

  4. #4

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    Which image build did you flash? "latest Vix" really means nothing, sorry...
    Unplug the network cable & reboot.
    Give it a while & report back...

  5. The Following User Says Thank You to judge For This Useful Post:

    doxe (21-03-13)

  6. #5

    Title
    Junior Member
    Join Date
    Aug 2011
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    It was build 632 and I will give it a go and report back. Thanks for your help

    DoXe

  7. #6

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    Build 632 has flashed fine on both my TM2T & TMTwin.
    I do still dread those 49% type loading screens though...
    Haven't had it stuck on any recent builds, let us know how you get on.

  8. #7

    Title
    Junior Member
    Join Date
    Aug 2011
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    I have done as you said and removed the Lan. It loaded up right away. I then followed the setup and re plugged in my lan and it will not see the internet connection. I am just in the process of searching the channels. Will keep you updated and again many thanks for your help

    DoXe

  9. #8

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    Glad you have a booting box again, before you jump back into channel lists/epg and so on... I'd sort the network issue first.
    Set the correct network settings & reboot once or twice to make sure all is ok before you go adding channels & epg.
    Will save on frustration if any other issues kick in...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.