Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 12 of 12

Thread: My et 5000 does not want boot

  1. #1

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    My et 5000 does not want boot

    Due to several power failure in my home, every time when i boot my box it does not respond and give me pale red led.
    when i leaved it for 2 or 3 hours, it respond.
    the last time, it does not boot till i install vix image 2.2.0 while i was on 2.2.1.
    this time, it does not want to accept same image or boot loader.
    please help

  2. #2

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    does any one have suggestion

  3. #3
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,934 Times in 12,378 Posts

    Re: My et 5000 does not want boot

    So which exact image are you trying now ? And if its below 3.0-627 try uodating to that and see what happens.

    Sent from my GT-I9300 using Tapatalk 2
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  4. #4

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i am on vix 2.2.1 and i am trying to install 2.2.0

  5. #5

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    hi,
    the situation changed when i used putty to get crash log.
    the 3 led's back to work.
    start to install latest boot loader and things go as usual till:
    bootloader Linux 2.6.31 UBIFS
    booting....
    my display freezes on this message .
    i tried to install vix image based on this bl but after download the message appear again and red and green led's bright.
    tried other images but nothing
    so, what can i do

  6. #6
    josweet's Avatar
    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    138
    Thanks
    67
    Thanked 24 Times in 16 Posts
    Install the latest image mate, not them old ones> http://www.world-of-satellite.com/en...p?dir=ET-5x00/
    Version 3.0 and up needs an updated boot loader if i remember correctly.

  7. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by essam100 View Post
    hi,
    the situation changed when i used putty to get crash log.
    the 3 led's back to work.
    start to install latest boot loader and things go as usual till:
    bootloader Linux 2.6.31 UBIFS
    booting....
    my display freezes on this message .
    i tried to install vix image based on this bl but after download the message appear again and red and green led's bright.
    tried other images but nothing
    so, what can i do
    have you tried this... put the ET5000 folder in the root of a USB stick, put the stick in any of the USB ports then hold the up arrow on the front of the receiver and the new firmware will start flashing

  8. #8

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i made a crash log by putty and found :

    brcmnand_read_id: CS1: dev_id=ecf10095
    After: NandSelect=50000200, nandConfig=15142200
    Block size=00020000, erase shift=17
    NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
    busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    timing1 not adjusted: 5363444f
    timing2 not adjusted: 00000fc6
    eccLevel=15, 1Ksector=0, oob=16
    nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
    BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS1

    Found NAND on CS1: ACC=d7ff1010, cfg=15142200, flashId=ecf10095, tim1=5363444f, tim2=00000fc6
    BrcmNAND version = 0x0302 128MB @00000000
    B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
    brcmnand_read_id: CS1: dev_id=ecf10095
    After: NandSelect=50000200, nandConfig=15142200
    Found NAND flash on Chip Select 1, chipSize=128MB, usable size=128MB, base=0
    brcmnand_scan: B4 nand_select = 50000200
    brcmnand_scan: After nand_select = 50000200
    page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
    Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
    ECC layout=brcmnand_oob_bch4_4k
    brcmnand_scan: mtd->oobsize=64
    usb 2-1: new high-speed USB device number 2 using ehci-brcm
    brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    -->brcmnand_default_bbt
    brcmnand_default_bbt: bbt_td = bbt_main_descr
    Adjust partition complete size from entire device to 7f00000 to avoid overlap with BBT reserved space
    Adjust partition rootfs size from entire device to 7900000 to avoid overlap with BBT reserved space
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000000000-0x000007f00000 : "complete"
    0x000000000000-0x000000600000 : "kernel"
    0x000000600000-0x000007f00000 : "rootfs"
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    UBI: attaching mtd2 to ubi0
    UBI: physical eraseblock size: 131072 bytes (128 KiB)
    UBI: logical eraseblock size: 126976 bytes
    UBI: smallest flash I/O unit: 2048
    UBI: VID header offset: 2048 (aligned 2048)
    UBI: data offset: 4096
    hub 2-1:1.0: USB hub found
    hub 2-1:1.0: 4 ports detected
    ata2: SATA link down (SStatus 4 SControl 300)
    UBI: max. sequence number: 67
    UBI: attached mtd2 to ubi0
    UBI: MTD device name: "rootfs"
    UBI: MTD device size: 121 MiB
    UBI: number of good PEBs: 968
    UBI: number of bad PEBs: 0
    UBI: number of corrupted PEBs: 0
    UBI: max. allowed volumes: 128
    UBI: wear-leveling threshold: 4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes: 1
    UBI: available PEBs: 0
    UBI: total number of reserved PEBs: 968
    UBI: number of PEBs reserved for bad PEB handling: 9
    UBI: max/mean erase counter: 2/0
    UBI: image sequence number: 947646524
    ALSA device list:
    No soundcards found.
    UBI: background thread "ubi_bgt0d" started, PID 47
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size: 119865344 bytes (117056 KiB, 114 MiB, 944 LEBs)
    UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    UBIFS: media format: w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root: 0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:10.
    devtmpfs: mounted
    Freeing unused kernel memory: 244k freed
    INIT: version 2.88 booting
    usbcore: registered new interface driver tpm
    /dev/dvb/adapter0/video0: No such file or directory
    cat: can't open '/proc/stb/info/boxtype': No such file or directory
    ALSA: Restoring mixer settings...
    Configuring network interfaces... /usr/sbin/alsactl: load_state:1686: No soundcards found...
    bcmemac: eth0 NIC Link is Down
    udhcpc (v1.19.4) started
    Sending discover...
    Sending discover...
    Sending discover...
    No lease, forking to background
    done.
    modprobe: FATAL: Error inserting ipv6 (/lib/modules/3.6.0/kernel/net/ipv6/ipv6.ko): Invalid argument

    Mounting remote filesystems...
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    INIT: Entering runlevel: 3
    Starting system message bus: dbus.
    Starting Dropbear SSH server: modprobe: FATAL: Error inserting ipv6 (/lib/modules/3.6.0/kernel/net/ipv6/ipv6.ko): Invalid argument

    modprobe: FATAL: Error inserting ipv6 (/lib/modules/3.6.0/kernel/net/ipv6/ipv6.ko): Invalid argument

    dropbear.
    Starting internet superserver: inetd.
    Starting syslogd/klogd: done
    * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
    ...done.
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    /dev/dvb/adapter0/video0: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    /dev/fb0: No such file or directory
    + (9) GFBDC
    /dev/fb0: No such file or directory
    framebuffer not available.
    FATAL: no framebuffer available
    Segmentation fault
    INIT: Id "gui" respawning too fast: disabled for 5 minutes
    INIT: no more processes left in this runlevel

  9. #9
    josweet's Avatar
    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    138
    Thanks
    67
    Thanked 24 Times in 16 Posts
    My ET9000 will not install a fresh image if any of the other usb's are in use. Remove every other USB device before flashing.

  10. #10

    Title
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by josweet View Post
    My ET9000 will not install a fresh image if any of the other usb's are in use. Remove every other USB device before flashing.
    i already did but still the same.
    does this log means something?

  11. #11
    josweet's Avatar
    Title
    Senior Member
    Join Date
    Dec 2010
    Posts
    138
    Thanks
    67
    Thanked 24 Times in 16 Posts
    Which VIX build & bootloader are you trying to install?

  12. #12

    Title
    Junior Member
    Join Date
    Jan 2013
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hello. I have a et5000 Extrend. I throw some images with usb but it does not restart even though the image gets. . Can you do reboot with telnet, but we only come logos screen image. Has anyone any ideas?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.