Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 53

Thread: VU+ Duo IR Remote Codes in HEX Format

  1. #16
    steford
    Quote Originally Posted by Maxwell4321 View Post
    After extensive investigation it is now revealed that the Hit and Miss problems with remotes is a problem with the VU Driver itself, it was apparently a problem that was flagged with original remotes in all versions of the original image up to 5.2 when an updated driver was issued by VU. The new driver cured 99% of the problems with the original remote but not a lot for universal remotes. Unless VU acknowledge that there are further issues with this driver and issue a new one nothing more can be done (unless our coding star andyblac knows different)
    Interesting. The box would be perfect for me if this issue was resolved. I can live with it as it is of course with the original remote close at hand should it be required.

  2. #17

    Title
    Junior Member
    Join Date
    Jan 2011
    Posts
    2
    Thanks
    0
    Thanked 1 Time in 1 Post
    Here a posted set of Discrete On/Off codes from a German board, did not yet test them:

    Discrete On:
    0000 0073 0000 001E 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0030 0020 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0020 0020 0020 0020 0010 0011 0020 0020 0020 0020 0020 0020 0010 0011 0020 0010 0010 0020 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0020 0010 0010 0010 09D2

    Discrete Off:
    0000 0073 0000 001F 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0030 0020 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0020 0020 0020 0020 0010 0011 0020 0020 0010 0011 0010 0011 0020 0020 0010 0011 0020 0010 0010 0020 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0020 0010 0010 0010 09D2

    As described, the VU+ uses a toggle bit in its remote/receiver:
    Parity bit: Some remote controls change their codes each time the signal is sent. For instance, if you press the number "5" the code would end in a "0". The second time you press it the code ends in "1". The problem with this is that a learning remote control can learn only one of those signals – not both. Thus, such devices typically will not respond to a universal remote when you send the same code twice in a row (for instance the channel "55"). For more help on this problem click here. Also known as a toggle bit. See also: learning. (from remotecentral.com)

    Can you switch off the toggle bit as part of the VU+ driver configuration? Any idea?

    (In Windows MCE, which uses toggle bits as well, you can switch it off with a registry key.)
    Last edited by silverfox0786; 07-01-11 at 01:26. Reason: Removed Link

  3. The Following User Says Thank You to hurz For This Useful Post:

    Sicilian (07-01-11)

  4. #18

    Title
    Senior Member
    Join Date
    Jun 2010
    Posts
    178
    Thanks
    46
    Thanked 58 Times in 30 Posts
    I'll give these codes a go if they work I would be very happy I'll let you know how I get on

  5. #19

    Title
    Member
    Join Date
    Dec 2010
    Location
    Luxembourg
    Posts
    42
    Thanks
    7
    Thanked 4 Times in 4 Posts
    I once had remote that wouldn't learn codes until I replaced the batteries - I think they need more power to learn than to emit...

  6. #20

    Title
    Junior Member
    Join Date
    Jan 2011
    Posts
    2
    Thanks
    0
    Thanked 1 Time in 1 Post
    The discrete codes do not really work - they seem to be the power on/off code, one with toggle bit on, the other toggle bit off.
    So they work as long as you press no other button. After pressing one, the codes are inversed, so on = off and vice versa.

  7. #21

    Title
    Member
    Join Date
    Dec 2010
    Posts
    57
    Thanks
    2
    Thanked 40 Times in 15 Posts
    Can I do anything with these codes to get the vu+ to work with my slingbox?

  8. #22
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,259
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Quote Originally Posted by rob View Post
    What I really need is discrete IR codes for Power-On and Power-Off. All we have right now is Power-Toggle, which is not very helpful with a programmable remote like my Logitech Harmony One.
    VU+ has promised to add discrete powercommands for the UNO. Hopefully they will do the same for the DUO & SOLO.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  9. The Following 3 Users Say Thank You to Rob van der Does For This Useful Post:

    bassethound (09-05-11),Larry-G (09-05-11),Maxwell (10-05-11)

  10. #23

    Title
    Junior Member
    Join Date
    Apr 2011
    Posts
    11
    Thanks
    4
    Thanked 0 Times in 0 Posts
    I've just come up with a solution to this... Create a copy of your 'Vu+ Duo' device in the Pronto. Learn each button in both 'devices' one after another, jumping from one to the other afterward.

    eg. 'Learn' UP_BUTTON on "VU a", then go to your "VU b" and learn it on there (making sure not to press anything else in between).
    Then in 'VU a', add "Jump to VU b" and vice versa.

    The screen change isn't even visible. Yes it's a bit of a pain to set up, but works well once done.

  11. #24
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,259
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Quote Originally Posted by gunthergloop View Post
    I've just come up with a solution to this...
    Sorry: a solution to what?

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  12. #25

    Title
    Junior Member
    Join Date
    Apr 2011
    Posts
    11
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by VUplus NL View Post
    Sorry: a solution to what?
    To the problem people were having in this thread... the VU+ doesn't recognise the same command twice from learnt devices. Using my method, the Pronto can work around this.

  13. #26

    Title
    Senior Member
    Join Date
    Jun 2010
    Posts
    178
    Thanks
    46
    Thanked 58 Times in 30 Posts
    Has anyone the discreet power ir codes for the uno, as i wouldn't mind trying them on the duo. if someone could post them up in hex format i could try it out. Thnx

  14. #27
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,259
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    UNO works on R/C code 2, DUO on mode 1, so this is not going to work.
    But if you have a Harmony R/C I can help you.

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  15. #28

    Title
    Junior Member
    Join Date
    Nov 2010
    Posts
    5
    Thanks
    3
    Thanked 0 Times in 0 Posts
    After many configurations now I'm asking for an help.
    I've an Harmony Touch RC and I've problem in power on and stand by.
    I've programmed an activity that power on, at the same time, all needed devices (including VU+DUO) and another that stand by all at once at the end of the use. Without discret power on and standby its a nightmare: if DUO power on than it doesnt standby when I press OFF; changed config and it doesnt power on, after powered on manualy than it stand by correctly with the OFF activity!!!
    If I assign a button for power toggle it works well.
    Rob, how do you solve this issue?
    Thx in advance.

  16. #29

    Title
    Member
    Join Date
    Nov 2012
    Location
    UK
    Posts
    40
    Thanks
    9
    Thanked 1 Time in 1 Post
    I have an Harmony One - I will be looking for answer on discrete Deep Standby and Standby, and On commands too. As part of Activities, the Power Toggle works fine, with long short presses. Yet the same command within the Orange Devices section, doesn't work!

    I originally set up by selecting Sat Rec > VU+ Duo - but sometimes Harmony software has the same device in many places. Anyone got a better solution or work around?

  17. #30
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,259
    Thanks
    1,717
    Thanked 9,461 Times in 6,675 Posts
    Quote Originally Posted by DeStRo-W View Post
    After many configurations now I'm asking for an help.
    I've an Harmony Touch RC and I've problem in power on and stand by.
    I've programmed an activity that power on, at the same time, all needed devices (including VU+DUO) and another that stand by all at once at the end of the use. Without discrete power on and standby its a nightmare: if DUO power on than it doesnt standby when I press OFF; changed config and it doesn't power on, after powered on manually than it stand by correctly with the OFF activity!!!
    If I assign a button for power toggle it works well.
    Rob, how do you solve this issue?
    Thx in advance.
    I'm sorry, but the problem isn't clear to me: an activity that 'stand by all at once at the end of the use'?
    I take it you have one activity that includes the DUO (something like watching TV), and you want to be sure the DUO powers 'on' at the start of that activity and goes to standby when stopping that activity; correct?

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

Page 2 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.