Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: How to flash / Upgrade ET5000 via USB memory stick [Kernal 3.0.1]

  1. #1

    Title
    Senior Member
    Join Date
    Oct 2010
    Location
    Berkshire
    Posts
    9,697
    Thanks
    1,039
    Thanked 4,385 Times in 2,257 Posts

    How to flash / Upgrade ET5000 via USB memory stick [Kernal 3.0.1]

    Format USB memory stick FAT32.

    Create et5x00 folder in root of memory stick and copy the following 5 files to that location.

    1) imageversion
    2) kernel.bin
    3) noforce
    4) rootfs.bin
    5) splash.bin

    Insert the USB medium into either USB sockets on the front or rear panel.
    Now Power Off and Power On the box through the powerswitch at the rear panel of the box.

    After Power On, ET5000 is detecting if there is ET5000 firmware available on the USB stick.
    When the yellow/orange led shines then there is ET5000 firmware detected.
    To load the ET5000 firmware you'll need to press the up button on the frontpanel.
    When the green led will shine together with he yellow/orange led then the box is loading the firmware.
    Please be patient because it will take couple of minutes to finish upgrading.
    When the yellow/orange led will disappear then the box is finished upgrading the firmware.
    The box will startup automatically after the upgrade is finished.

    -Note-
    During upgrading, please don't unplug power or shut down STB.
    The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE


    Please note to flash a Kernal 3.1.0 image you must flash the latest bootloader
    http://www.world-of-satellite.com/at...0&d=1323271963
    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM


    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓

  2. The Following 7 Users Say Thank You to silverfox0786 For This Useful Post:

    hacettepeli_06m (02-07-20),mbensalah (30-06-12),policeman7 (04-10-12),sim75 (09-11-14)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.