Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: ET6000 bootloader and how to upgrade

  1. #1
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts

    ET6000 bootloader and how to upgrade

    Before starting the procedure below, ensure that the USB stick is formated FAT32 and has no other files on the stick!

    Preparation
    1) Download the 'et6000-bootloader-20111020' file in the ET6000 menu on this website.
    2) Unzip the downloaded file then 'et5000' and 'et6000' folders will be appeared.
    3) Copy those two folders into the USB Medium

    Insert the USB medium into either USB sockets on the front or rear panel.
    Power Off and Power On the box through the powerswitch at the rear panel of the box.

    After Power On, ET6000 is detecting if there is ET6000 bootloader available on the USB medium.
    When the yellow/orange led shines then there is ET6000 bootloader detected.
    To load the ET6000 bootloader you'll need to press the up button on the frontpanel.
    When the green led will shine together with he yellow/orange led then the box is loading the bootloader.
    Please be patient because it will take couple of minutes to finish upgrading.
    When the yellow/orange led will disappear then the box is finished upgrading the firmware.
    The box will startup automatically after the upgrade is finished.

    -Warning-
    During upgrading, please don't unplug power or shut down STB.
    Don’t power off within 5 seconds after upgrade is completed.
    The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE

    -Important Note-
    Don’t upgrade the Bootloader and Firmware at the same time.
    Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.
    Attached Files Attached Files
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  2. The Following 5 Users Say Thank You to Sicilian For This Useful Post:

    bassethound (09-12-11),Cus2k (09-12-11),gunit (04-11-13),mascra (23-05-13)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.