Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 4 of 4

Thread: How to use Eaglebox HD "Super Setting"

  1. #1

    Title
    V.I.P
    Join Date
    Mar 2010
    Posts
    138
    Thanks
    0
    Thanked 595 Times in 104 Posts

    Thumbs up How to use Eaglebox HD "Super Setting"

    First you must activate Super Setting where all the good stuff is, by the following:

    Menu -> Setting -> Version.

    When the Cursor is on the Version option, press the red button

    Enter the PIN 1510

    [the same process will disable Super Setting if it is enabled]

    Select Super Setting - press ok

    The first option allows you to select a C/S option - CCcam NewCamd - Avatar -eCAM or Disable.
    Avatar and eCam have no function in Europe.

    As each c/s option is selected, the relevant Config option appears highlighted. You may enter there and add your line details.
    To view what is there, and unhide the data, press the red button and enter the PIN 7878

    To check if all is ok, use the test option at the bottom of the config sub menu. It will attempt to connect, and give you a Success or Failure result.

    The other option in Super Setting is EMU.

    Use this if you have loaded a softcam. Its use is obvious and needs no explanation.

  2. The Following User Says Thank You to Gonzo For This Useful Post:

    Ex-TM6900 (09-05-12)

  3. #2

    Title
    Junior Member
    Join Date
    May 2012
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Gonzo View Post
    First you must activate Super Setting where all the good stuff is, by the following:

    Menu -> Setting -> Version.

    When the Cursor is on the Version option, press the red button

    Enter the PIN 1510

    [the same process will disable Super Setting if it is enabled]

    Select Super Setting - press ok

    The first option allows you to select a C/S option - CCcam NewCamd - Avatar -eCAM or Disable.
    Avatar and eCam have no function in Europe.

    As each c/s option is selected, the relevant Config option appears highlighted. You may enter there and add your line details.
    To view what is there, and unhide the data, press the red button and enter the PIN 7878

    To check if all is ok, use the test option at the bottom of the config sub menu. It will attempt to connect, and give you a Success or Failure result.

    The other option in Super Setting is EMU.

    Use this if you have loaded a softcam. Its use is obvious and needs no explanation.

    That does not work on my box....nothing happens when I press red button.

  4. #3
    basilyoung's Avatar
    Title
    V.I.P - R.I.P - Will never be forgotten...
    Join Date
    Jul 2010
    Posts
    3,233
    Thanks
    423
    Thanked 1,075 Times in 810 Posts
    I would think since the first post was made, things have changed, having said that, I cant offer any advice on any updates on this unit, and be aware of the rules here as well, ( no surgestion that you are breaking rules ) as this unit appears to be set up for "the good stuff" ( even if its not working )
    Units; VU+Ultimo/duo/DM800/7020HD/tm9100
    1.2 channel master/quad feedhorn/36volt /vbox
    1 fixed dish, and 1 motorized 1mtr dish
    and a pile of redundant cards/cams

  5. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Your are supposed to press the red buttons and enter the 4 digit pin.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.