Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: How to flash your VU+ Solo with USB stick

  1. #1

    Title
    On Holiday
    Join Date
    Mar 2010
    Posts
    0
    Thanks
    74
    Thanked 191 Times in 76 Posts
    I've had a play about with this today and I've worked out what looks like the way to do this, it seems to have worked for me...

    Exactly as suspected the files go in a vuplus/solo directory from the root of the USB stick. You then put the USB stick in the front USB port on the SOLO, then turn on mains power and you should get:

    ORANGE/RED LIGHT (CONSTANT) IN ROUND DISPLAY WINDOW - LED LIGHT FLASHING ON USB STICK (if yours has an LED)

    after a min or two you'll then get

    ORANGE/RED LIGHT FLASH IN ROUND DISPLAY WINDOW - NO FLASHING FROM LED ON USB STICK

    then just a short while later

    GREEN LED FLASHING IN ROUND DISPLAY WINDOW - NO FLASHING FROM LED ON USB

    That's it, you can now remove the USB stick and turn the mains power off then back on. Once you turn the power back on again the green LED in the display window should be constant and it'll just be a black screen on the TV, you must wait a good while now, longer than you'd imagine, then eventually the VU+ setup wizard screen will appear and you are good to go!

    Seems fairly obvious really now that stage one is transfer info from USB stick, stage two flash from memory, stage three complete! Hope this helps.

  2. The Following 29 Users Say Thank You to Retired member For This Useful Post:

    + Show/Hide list of the thanked

    ali_sat1359 (15-10-10),bassethound (14-11-10),biker1 (19-01-12),deano41 (07-01-12),Dogs (09-07-11),doverai (02-12-12),Dr.Dream (29-06-10),eclipsespain (16-09-13),filmman (02-07-10),Foxylady (11-11-10),hosein_satsat (04-07-10),Jaffna (18-02-11),jezhuggins (24-11-10),joes (16-06-13),jop99 (15-03-12),kiani70 (24-12-10),kubaw14 (23-03-14),Mr. Mister (27-03-11),paul362 (30-06-10),pazza07 (20-01-13),Sicilian (29-06-10),SILVER DAILY (25-08-10),Youriinho (13-10-14),zarc (10-12-12),Zupy (30-06-10)

  3. #2

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    hi me too i 've just flashed my vu+solo with usb and im a bit scared about the time that it will take the black screen on tv and cuz as u said it should i ask you the time took for you to be back the image?
    thank you so much

  4. #3

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    can you please answer cuz im a bit pressed

  5. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,628
    Thanks
    23,572
    Thanked 26,036 Times in 7,629 Posts
    What exactly is the issue you are having?
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, AX HD61 COMBO, ZGEMMA H9 TWIN, VU+ ULTIMO 4K
    Triax 1.1m Powered by TM2600, Technomate 80cm Powered by TM-2600 and Fixed 28.2 Zone 2 dish





  6. #5

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    the fact that i flashed my vu+solo with usb and after when i switch on i have no connection with tv i mean just a black screen

  7. #6

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    4
    Thanks
    1
    Thanked 0 Times in 0 Posts
    its doeasnt work no more waht should i do ?

  8. #7
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,628
    Thanks
    23,572
    Thanked 26,036 Times in 7,629 Posts
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, AX HD61 COMBO, ZGEMMA H9 TWIN, VU+ ULTIMO 4K
    Triax 1.1m Powered by TM2600, Technomate 80cm Powered by TM-2600 and Fixed 28.2 Zone 2 dish





  9. #8

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    29
    Thanks
    2
    Thanked 3 Times in 1 Post
    dear i have same problem i bought new receiver i want to using cccam on it for this purpose i install black hole receiver in it with vu utilty flashafter flash via r232 my receiver did not show display on my tv he just show black screen i am so tens about my vu+solo plz solve my problem what i do, my receiver just show green light on front panel plz write me on my email or pm (xxxxxxxxxxxxxxxx)
    Last edited by Sicilian; 14-11-10 at 09:13. Reason: no need for pm, use the forum!

  10. #9
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,628
    Thanks
    23,572
    Thanked 26,036 Times in 7,629 Posts
    The RS232 utility does not work with the Solo, I've contact VU+ Support about the issue. Try re-flashing again with USB image.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, AX HD61 COMBO, ZGEMMA H9 TWIN, VU+ ULTIMO 4K
    Triax 1.1m Powered by TM2600, Technomate 80cm Powered by TM-2600 and Fixed 28.2 Zone 2 dish





  11. The Following User Says Thank You to Sicilian For This Useful Post:

    bassethound (14-11-10)

  12. #10

    Title
    Member
    Join Date
    Jan 2011
    Location
    Scotland
    Posts
    43
    Thanks
    24
    Thanked 7 Times in 5 Posts
    Well i just tried the above method and it was done in under 4 min. I must say so far im impressed. Its the quickest box ive flashed yet. Just got it scanning the now then i will upload some boquets.

  13. #11

    Title
    Senior Member
    Join Date
    Oct 2010
    Location
    Berkshire
    Posts
    9,697
    Thanks
    1,039
    Thanked 4,385 Times in 2,257 Posts
    Quote Originally Posted by Gav View Post
    Well i just tried the above method and it was done in under 4 min. I must say so far im impressed. Its the quickest box ive flashed yet. Just got it scanning the now then i will upload some boquets.
    wow 4 mins now thats long i have flashed quicker than that i'd say realsitlicly about 2 mins to flash
    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM


    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓

  14. #12

    Title
    Junior Member
    Join Date
    Jan 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanx for thread

  15. #13

    Title
    Junior Member
    Join Date
    Oct 2012
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks Worked for me

  16. #14

    Title
    Junior Member
    Join Date
    Oct 2012
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hello hope i am not hijacking , i have just loaded this onto my vu+ solo
    http://www.world-of-satellite.com/sh...mage-Release-s

    hope that is right it seems good so far , 2 questions what do i do now & how do i load my ccam.

    thanks

  17. #15
    Stanman's Avatar
    Title
    Junior Admin
    Donated Member
    Join Date
    May 2010
    Posts
    11,284
    Thanks
    1,035
    Thanked 3,599 Times in 2,632 Posts
    Quote Originally Posted by olive25 View Post
    Hello hope i am not hijacking , i have just loaded this onto my vu+ solo
    http://www.world-of-satellite.com/sh...mage-Release-s

    hope that is right it seems good so far , 2 questions what do i do now & how do i load my ccam.

    thanks
    Latest is this http://www.world-of-satellite.com/sh...-OE3-0-Release

    You need to download the cams from here http://www.world-of-satellite.com/sh...iX-Team-images

    and follow this tutorial http://www.world-of-satellite.com/sh...mate-Venton-VU

    there is no CFG file so you will need to create one yourself - use notepad+++ - search the forum please as Pheonix has posted it here

    Support The Sponsor - Buy from the best HERE
    Please abide by the rules - have a read HERE
    VIX manual & guides >>HERE
    Download images from >> HERE
    New Box Setup Guide >>HERE

    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE


    Follow us on Twitter

    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM

    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.