ET5000 - OSCAM & carte reader

[Jacka696]

Hi, i'am looking for a good config tu use Oscam with the internal card reader.

2011/07/27 13:29:48 57B3F0 r reader tntsat initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/07/27 13:29:49 0 tntsat card detected
2011/07/27 13:29:50 57B3F0 r ATR: 3F 77 18 00 00 C0 F8 C2 82 02 E2 C4
2011/07/27 13:29:52 57B3F0 r Warning: D=0 is invalid, forcing D=1
2011/07/27 13:29:53 57B3F0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/07/27 13:29:54 57B3F0 r card system not supported
2011/07/27 13:29:54 57B3F0 r Normal mode failed, reverting to Deprecated Mode
2011/07/27 13:29:55 57B3F0 r ATR: 3F 77 18 3F 77 18 00 00 C2 47 40 00
2011/07/27 13:29:55 57B3F0 r Warning: D=0 is invalid, forcing D=1
2011/07/27 13:29:56 57B3F0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/07/27 13:29:57 57B3F0 r card system not supported
2011/07/27 13:29:57 57B3F0 r card initializing error

my config

[reader]
label = tntsat
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 357
cardmhz = 357
caid = 0500
ident = 0500:030B00
aeskeys = 0500@030B00:43XX43,A7XX26,EFXXE3
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

Thanks

[Sicilian]

This might help
http://www.oscamconfigs.info/2011/04/tntsat-viaccess-card-interna-cardreader/

[Jacka696]

Thx

With version 1.10 stable, all is ok (bug into 1.20)