punisher
28-05-11, 21:03
In this tutorial I am going to show you how to put picons onto usb stick. This is 1 of a few ways of doing this and for me this is easier than unplugging usb plugging back in etc lol
For this you need a usb stick formatted as fat32 or ext3 and the usb to be mounted correctly in device manager as media/usb
You can check if this is the case by going to Menu/Setup/ViX/Devices Manager and should look like this below;
9388
If your usb isnt mounted correctly then press "Green" to setup mounts then highligh usb and use you left and right arrows on your remote to get to media/usb and then press "Green" to save the settings
9389
Download your desired picon set from the link below and extract the file
http://www.world-of-satellite.com/forumdisplay.php?35-Picons
Once usb setup correctly you will need to connect via FTP into the box
For those that don't know how to setup FTP to the box then follow the first few steps of this guide to get your ftp setup
http://www.world-of-satellite.com/showthread.php?8704-How-to-Install-CCcam-MGCamd-Others-on-Duo-Solo-Uno-ET9000-ET5000-ViX&p=64577#post64577
Once connected to your box you should see the screen below (or similar)
9390
Go to media/usb/ and create a folder in there called picon. so it should look like the screen below
9391
Then transfer all the images from the picon set that you downloaded into the picon folder and once complete it should look like so
9392
Reboot the box if needed and the picons will be displayed in the info bar
9397
If you also want the picons to be displayed in the epg then press the epg button on your remote and then menu
If using PIG (Picture in Graphics) then you will need your settings to match below;
93959396
If not using PIG (Picture in Graphics) then you will need your settings to match below;
93949393
And thats it you now have picons setup on your ViX Image :D
For this you need a usb stick formatted as fat32 or ext3 and the usb to be mounted correctly in device manager as media/usb
You can check if this is the case by going to Menu/Setup/ViX/Devices Manager and should look like this below;
9388
If your usb isnt mounted correctly then press "Green" to setup mounts then highligh usb and use you left and right arrows on your remote to get to media/usb and then press "Green" to save the settings
9389
Download your desired picon set from the link below and extract the file
http://www.world-of-satellite.com/forumdisplay.php?35-Picons
Once usb setup correctly you will need to connect via FTP into the box
For those that don't know how to setup FTP to the box then follow the first few steps of this guide to get your ftp setup
http://www.world-of-satellite.com/showthread.php?8704-How-to-Install-CCcam-MGCamd-Others-on-Duo-Solo-Uno-ET9000-ET5000-ViX&p=64577#post64577
Once connected to your box you should see the screen below (or similar)
9390
Go to media/usb/ and create a folder in there called picon. so it should look like the screen below
9391
Then transfer all the images from the picon set that you downloaded into the picon folder and once complete it should look like so
9392
Reboot the box if needed and the picons will be displayed in the info bar
9397
If you also want the picons to be displayed in the epg then press the epg button on your remote and then menu
If using PIG (Picture in Graphics) then you will need your settings to match below;
93959396
If not using PIG (Picture in Graphics) then you will need your settings to match below;
93949393
And thats it you now have picons setup on your ViX Image :D