PDA

View Full Version : monobloc lnb or motorised dish help



boxer29
23-06-11, 12:11
ive got fixed dish with quad lnb at 28.2 sky ,,2 feeds go to my vu+duo and the other go to my sky hd box ,,
ive got a 80 cm dish lying around want to watch more channels on
13 e hotbird
19.2 e hotbird
16 e sesat
and 26 e
im getting a bit confused here ,
i was thinking of getting the tm2600 from our sponsor ,,and put it to the dish ,got clear vision
ive read that the mororised dish slips and you have reallign it ,,if windy ,
the 80 cm dish which i have got has got a plastic bracket at the back which is bolted with nuts to the metal dish and then there is a hole in the dish which take the metal stick with also goes in the plastic bracket and takes the universal lnb in my case its philips slx1019 single lnb
the dish is going to be placed in front of main wall ,,not above the roof
what would you recommend
thanks

Donnie
23-06-11, 14:15
I asked a similar question as I have used motors for years but where I live is exposed and I am fed up of adjusting the motor, truth is it has been stuck on 13e for just over a year.

I will wait to see what silverfox says but I think I will go for it.

http://www.world-of-satellite.com/showthread.php?9079-Inverto-Basic-Kit-for-Single-Twin-MultiConnect-LNBs-%28SET1%29
Here is a link to the product.
http://www.world-of-satellite.co.uk/LNB/Inverto-Multiconnect-Systems/Inverto-MultiConnect-Set01