cypchris
11-06-10, 15:29
TM800-UR-1.0.0-11/06/10
1-There will be 2 types of remote command.
when an image is downloaded it will have default remote keys no need to activate below function,
only time you use this function when pressing a key and getting wrong function.
To change remote command >>> press "EXIT" 5 times in front panel circular blue light will blink 3 times after that its ok.
2-. added internet update function
- "software Update by Internet", if you press LAN->blue,, There will be pre tested image"
3- (BETA)"software Update by Internet", press LAN->MENU->0->MENU
there will be beta amige.Warning ,,,it is only beta not fully tested,
( Warring : after updating it will be factory reset , you will lose all settings except emul config )
3. added internet update from front panel no need of connecting to any TV,
Turn on tm-800 "Checking Key" message appears , press "EXIT" .
it will update by Lan with Latest image automatically ,
4. added "AC3 downmix - On / Off" function
5. improve video quality in only cvbs and YPbPr
6. fixed blue screen when Lan button press in booting..
7. when channel remove, all channel list in memory restore by default
-----------------------------------------------------------------------
-------------------------------------------------------------------------
TM800-UR-1.0.0-04/06/10
1. Audio Fixed
-Multi Audio Language Selection
-Radio Channel
-Audio L/R
-Commentary Audio by selecting off or on
-Ac3 only active in pcm mode
2. RF hotkey is not Ready but rf modulator out put is ok,
3. blue panel command fixed
4. fixed cccam bug after off/on
-------------------------
-------------------------
Fixed in the last image 02-06-2010
changed satellite.xml
change resolution (Default 1080i / 16:9 Mode)
improved
1. after factory reset removed default bouquet
2. added function to view mac-address in top title of lan menu
3. improve factory reset( below 3 function added )
- if you install none compatible channel list , it will removed automatically
- if you remove default cam(now CCcam2104), it will be installed again
- if you use different satellites.xml, it will be restore default TM satellites.xml
4. when you select USALS, you will show "Positioner setup" menu.
5. Disable LPCM audio
6. reset only channel , softcam and skin after factory reset
7. split softcams for protect ipkg remove bug ( softcams(bin) + softcams.config(config)
-----------------------
1-There will be 2 types of remote command.
when an image is downloaded it will have default remote keys no need to activate below function,
only time you use this function when pressing a key and getting wrong function.
To change remote command >>> press "EXIT" 5 times in front panel circular blue light will blink 3 times after that its ok.
2-. added internet update function
- "software Update by Internet", if you press LAN->blue,, There will be pre tested image"
3- (BETA)"software Update by Internet", press LAN->MENU->0->MENU
there will be beta amige.Warning ,,,it is only beta not fully tested,
( Warring : after updating it will be factory reset , you will lose all settings except emul config )
3. added internet update from front panel no need of connecting to any TV,
Turn on tm-800 "Checking Key" message appears , press "EXIT" .
it will update by Lan with Latest image automatically ,
4. added "AC3 downmix - On / Off" function
5. improve video quality in only cvbs and YPbPr
6. fixed blue screen when Lan button press in booting..
7. when channel remove, all channel list in memory restore by default
-----------------------------------------------------------------------
-------------------------------------------------------------------------
TM800-UR-1.0.0-04/06/10
1. Audio Fixed
-Multi Audio Language Selection
-Radio Channel
-Audio L/R
-Commentary Audio by selecting off or on
-Ac3 only active in pcm mode
2. RF hotkey is not Ready but rf modulator out put is ok,
3. blue panel command fixed
4. fixed cccam bug after off/on
-------------------------
-------------------------
Fixed in the last image 02-06-2010
changed satellite.xml
change resolution (Default 1080i / 16:9 Mode)
improved
1. after factory reset removed default bouquet
2. added function to view mac-address in top title of lan menu
3. improve factory reset( below 3 function added )
- if you install none compatible channel list , it will removed automatically
- if you remove default cam(now CCcam2104), it will be installed again
- if you use different satellites.xml, it will be restore default TM satellites.xml
4. when you select USALS, you will show "Positioner setup" menu.
5. Disable LPCM audio
6. reset only channel , softcam and skin after factory reset
7. split softcams for protect ipkg remove bug ( softcams(bin) + softcams.config(config)
-----------------------