View Full Version : New Vu+ Hardware Drivers
20110526
- Support HDMI CEC device
- Support DDP
20110531
- Change CEC address scheme
(read : initiator, write: destination)
to use these drivers open the relevant archive using winrar
for the Duo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110531.tar.gz
for the Solo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110531.tar.gz
for the Uno
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110531.tar.gz
for the Ultimo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-2.6.18-7.3-4.4.3-20110531.tar.gz
now navigate to
lib/modules/2.6.18-**/extraon your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.
or just wait for these to be incorporated into the VIX image.
i have loaded the Uno drivers to my box and all is working fine.
silverfox0786
02-06-11, 19:36
im guessing andy will impliment this in a update so i will wait as i have 4 different boxes for it to be loaded on to
I put these on vix 2.1 restarted box. It works, but still don't what they do.
silverfox0786
02-06-11, 21:37
I put these on vix 2.1 restarted box. It works, but still don't what they do.
can i just advise ppl if they dont know what they are doing or why they are doing it then dont do it
Read my post in another thread regarding this. It adds hdmi cec na ddp. Definitions of what these are, and allowing you to decide whether you'd want them, are in there...
20110708
- Support DTS audio codec
- Fix CI recognition problem when restart
- Fix restart crash/delay problem
to use these drivers open the relevant archive using winrar
for the DUO vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz
for the SOLO vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz
for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz
now navigate to
lib/modules/2.6.18-**/extraon your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.
Vu+Solo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz
Vu+Duo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz
Vu+Uno
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz
please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.
20110715(uno)
- Lower the default FAN rpm
- Increase dynamic range of FAN speed
to use these drivers open the relevant archive using winrar
for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz
now navigate to
lib/modules/2.6.18-**/extraon your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.
Vu+Uno
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz
please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.
20111114
- Fix HDMI CEC problem(wakeup from standby)
- Reduce zapping noise in some A/V Receiver
- Fix Recording/Playback problem
- Fix High bitrate tuning problem(Uno, MUST Need a FPGA update,
- Improve media playback
- Fix skip problem in media playback
- Change temperature calculation algorithm.(uno, ultimo)
- Change the lowest FAN speed(ultimo)
- Fix incorrect keycode in the remote control(ultimo)
- Add interface to control VFD in the application(ultimo)
=====================
To use these drivers open the relevant archive using winrar
now navigate to
lib/modules/2.6.18-**/extra
on your box
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.
once the files have been transferred exit out of the FTP program and start a telnet session ( DO NOT REBOOT THE RECEIVER YET. )
once you have logged in issue the following command
depmod -a
after issuing the mentioned command you can now reboot the receiver.
To use the FPGA update file ( UNO ONLY ) unrar the file and copy the ( TS_PRO.dat ) file to a memory stick or to TMP on your receiver, now go to plugins and you will see a FPGA update option there, press this and navigate to the file you placed on your usb stick / receiver. This update takes around 5 minutes to complete.
20120820
- Improve TS playback
- Improve Graphic 2D acceleration
- Fix Russian VFD display(duo, uno)
- Fix High/low symbolrate channel scan problem.(Uno, Ultimo : Need FPGA Update)
-- UNO : http://archive.vuplus.com/download/fpga/vuuno/4.5/
-- ULTIMO : http://archive.vuplus.com/download/fpga/vuultimo/4.5/
- Fix EOS detection problem in media playback
- Enhance Security
Download via
http://archive.vuplus.com/download/drivers/
Rob van der Does
21-08-12, 06:16
VU+ has corrected the files on it's server: the download-function in the plugin 'FPGA upgrade', as is installed by default, can now be used (applies to UNO & Ultimo).
So very easy to do now:
FPGA Upgrade --> Blue (for download) --> Green (for upgrade)
new drivers again today.
20120824
- Change duo's remote control to the advanced type(for HBBTV)
ultimo drivers now also online, added to above post with the others.
Any one comeing up with a navi-x type Xbmc plug in like the jail brake on the Apple TV 2
06.05.2013
New Vu+ Drivers.
20130506
- Support dual tuner blindscan(duo2, uno, ultimo)
- Switching to kernel 3.3.8(solo2, Needs a kernel update)
- Fix SD video output problem when transcoding enabled(solo2)
- Enhance demux filtering(solo2)
- Official duo2 driver release
- Support DTS-HD
- Add redundant interface to zapping mode
DO NOT update the solo2 drivers manually as it needs a kernel update, wait for them to be included in the image, the Solo, Duo, Uno and Ultimo can be updated manually if you want to.
20130621
- Fix TS Playback problem
- Fix i2c error handling
- Turn off LCD at standby by default(duo2)
- Change default LCD brightness(duo2)
- Support DVB-T external antennae(duo2)
we get all this drivers with online ViX build update ?
we get all this drivers with online ViX build update ?
When images with these drivers (which is when the online update feeds with these drivers will be built), are built, then yes, you will get these drivers. Otherwise, you can manually update them (if you really want to try them before the new updates)...
Rob van der Does
21-06-13, 16:10
we get all this drivers with online ViX build update ?
Of course ....
Duo2 driver update
20130703(duo2)
- Support transcoding bit/frame rate change(100K< bitrate< 5M, framerate=23976 24000 29970 30000 59940 60000 )
- Enable SD video when transcoding
duo2 driver update
20130708(duo2)
- Fix no audio in radio channels
duo2 driver update
20130711(duo2)
- Fix recording problem
duo2 driver update
16/07/2013
Rob van der Does
18-07-13, 08:37
It's not a good idea posting only partial info. This driver can't be installed by hand, as it requires a bootloader update as well as a kernel update.
Installing the driver as is results in a non booting box.
Forgiveness does not happen again
you can delete it?????
Duo2 driver update
20130719(duo2)
- Fix Play/Pause key problem
- Support FP update
- Support VFD controller update
Duo2 driver update
20130722(duo2)
- Fix loop-through problem when 2 dual tuners are installed
- Improve VFD controller update(VFD controller update will resolve remote control sensitivity issue)
Duo2 driver update
20130726(duo2)
- Fix WOL problem(needs kernel update)
- Add proc entery for WOL
Rob van der Does
26-07-13, 17:31
Be aware: needs kernel update, so can't be used by FTPing the drivers.
update drivers
20130731
- Fix AGC in dual tuner & Solo2 internal tuner.
- Fix RTC problem when awake from front power button(solo2)
- Fix high bit rate problem(solo2, duo, solo)
- Fix SPDIF no sound prlblem(duo2)
- Fix RTC problem in WOL standby(duo2)
20130802(solo2, duo2)
- Improve occasional sluggish skip problem.
- Change play/pause button's key code to KEY_PLAYPAUSE(duo2)
- Enhance security
- Fix several minor bugs.
Update drivers
20130819
- Fix DTSHD downmix & passthrough
- Support more than 4 tuners(vtuner) in duo2 and ultimo
- Fix play/pause in solo2(when duo2's new remote control is used)
- Fix Xcrypt card detection problem(duo2, solo2, uno, ultimo)
- Support transcoding bitrate/framerate setup
(solo2, 50K<bitrate<1M, Change is in effect in the subsequent connection )
(solo2, 50K<bitrate<1M, Change is in effect in the subsequent connection )
Pity it is only limited to 1 Mbit/s. There is no such limitation on Duo2.
Hi,
Pity it is only limited to 1 Mbit/s. There is no such limitation on Duo2.
the limit for Duo2 is 5MBit so there is also a limit.
ciao
"- Support more than 4 tuners(vtuner) in duo2 and ultimo"
What are the implications of this change?
"- Support more than 4 tuners(vtuner) in duo2 and ultimo"
What are the implications of this change?
it means we can finally use USB tuners as well as 4 internal tuners at the same time, something that was not previously possible as once you had 4 internal tuners you could not use any more including USB tuners.
it means we can finally use USB tuners as well as 4 internal tuners at the same time, something that was not previously possible as once you had 4 internal tuners you could not use any more including USB tuners.
Thanks for the reply mate. That is good news indeed.
I think the last driver für vuduo (bm750) is a little buggy.
The image looks spongy and i have a problem with sound on some channels.
First if i deactivate and activate the DTS Downmix the sound comes back.
Pity it is only limited to 1 Mbit/s. There is no such limitation on Duo2.
The limit can be set to 5mbit on my solo 2 on 722?
Is this a skin issue?
Sent from my iPhone using Tapatalk
Rob van der Does
20-08-13, 15:17
The skin has nothing to do with settings. Has been fixed in next build.
New drivers for the Duo.
20130830(duo)
- Fix AC3 sound problem
New drivers again for the Duo, should hopefully solve the issue with 1080i and the fuzzy OSD.
20130903(duo)
- Fix 1080i problem
20130904
- Support non bcma encrypted PCMWAV in media playback
- Add missing entries in framerate_choices(duo2, solo2)
- Support 4 vtuners(duo2, solo2)
- Support transcoding in vtuner(duo2, solo2)
added duo drivers that i missed out from the above post dated 04.09.2013.
new drivers again today.
20130916
- Fix vtuner problem(duo2, solo2)
update driver
20130918
-
Fix transcoding problem(duo2)
Update driver
20131023
- Support DVB T2 Tuner(uno, ultimo, duo2)
- Support file transcoding(solo2, duo2 : needs an image update)
- Fix delivery system bug in vtuner
- Fix DDP passthrough(solo2, duo2)
Update driver
20131023
There are already incorporated into ViX from the next build.
Sent from my GT-I9300 using Tapatalk
- Support DVB T2 Tuner(uno, ultimo, duo2)
Can someone explain more about this please.
Does it mean there is a DVB-T2 plugin tuner on the way or does it mean support for existing usb tuners ?
thanks
Rob van der Does
27-10-13, 13:35
Does it mean there is a DVB-T2 plugin tuner on the way or does it mean support for existing usb tuners?
It looks that way as for USB-tuners no extra support is needed.
update driver
20131106
- Fix HDMI hotplug in standby(proc entry is also added)
- Support DVB-T2 automatic scan(uno, ultimo, duo2)
- Improve transcoding(duo2, solo2)
- Add dst_apply proc entry
- Increase demux number to 9(duo2, solo2, ultimo)
- Support blindscan in all slots(ulitmo, duo2)
20131108
- Support play/pause key of new Duo2 RC(solo/duo/uno/ultimo)
update driver
20131212
- Support more video codecs in media playback.(OE 2.1 gstreamer)
- Reduce First picture display time(zapping time improvement : duo2, solo2)
- Support dual transcoding(duo2, Only 2nd transcoding is mutually exclusive with PIP)
- Improve PCM playback(solo, duo, uno, ulitmo)
- Support 3D surround (solo, duo, solo2, duo2)
- Support AVL(automatic volume leveler)(duo2, solo2)
- Support more proc entries to control duo2 transcoding.(Plugin will follow)
- Improve temperature control of dual tuner when not in use(duo2, uno, ultimo)
- FPGA update in solo2(done automatically in the first bootup after installation)
- Fix EOS deteciton in media(PCM) & TS playback
- Support AAC passthrough
- Remove unnecessary debug messages(duo2)
Available here: http://archive.vuplus.com/download/drivers/
update driver
20131212
- Support more video codecs in media playback.(OE 2.1 gstreamer)
- Reduce First picture display time(zapping time improvement : duo2, solo2)
- Support dual transcoding(duo2, Only 2nd transcoding is mutually exclusive with PIP)
- Improve PCM playback(solo, duo, uno, ulitmo)
- Support 3D surround (solo, duo, solo2, duo2)
- Support AVL(automatic volume leveler)(duo2, solo2)
- Support more proc entries to control duo2 transcoding.(Plugin will follow)
- Improve temperature control of dual tuner when not in use(duo2, uno, ultimo)
- FPGA update in solo2(done automatically in the first bootup after installation)
- Fix EOS deteciton in media(PCM) & TS playback
- Support AAC passthrough
- Remove unnecessary debug messages(duo2)
Available here: http://archive.vuplus.com/download/drivers/
Duo
vuplus-dvb-modules-bm750-3.1.1-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-3.1.1-4.4.3-20131212.tar.gz)
Solo
vuplus-dvb-modules-vusolo-3.1.1-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-3.1.1-4.4.3-20131212.tar.gz)
Duo2
vuplus-dvb-modules-vuduo2-3.3.8-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.3.8-4.4.3-20131212.tar.gz)
Ultimo
vuplus-dvb-modules-vuultimo-3.1.1-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-3.1.1-4.4.3-20131212.tar.gz)
Solo2
vuplus-dvb-modules-vusolo2-3.3.8-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo2-3.3.8-4.4.3-20131212.tar.gz)
Uno
vuplus-dvb-modules-vuuno-3.1.1-4.4.3-20131212.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-3.1.1-4.4.3-20131212.tar.gz)
update driver
- fix DVB-T2 PLP Id problem
- fix booting error(duo2:temporary 20131216 version)
New Drivers 20131224
- Support new HBBTV release
- fix misc bugs.
update driver
20131230
- Fix dual tuner problem(duo2)
Update drivers
20130306
- Support blindscan(solo2, experimental)
- Support both SCART & HDMI audio in passthrough mode.(uno, ultimo, solo2, duo2)
- Fix no audio problem in some radio channels
- Support PCM Multi Channel(solo2, duo2)
- Fix timeshift problem
- Fix loop through problem (duo2, single tuner)
- Support dynamic contrast in PEP
- Turn on PQ Enhancement by default
- Add more PQ enhancement proc entries(solo2, duo2)
- Fix vtuner problem when RestartGUI
- Fix some CI modules recognition problem
Hi vmax. Thanks for your efforts and for posting the fixes - the update looks like it would yield benefits
I have been reading back this thread and have seen some warnings from Rob about loading drivers without the kernel update. I have also checked http://archive.vuplus.com/download/drivers/ and I see the above files listed but no instructions
I have a Vu+ Solo2, and I have never had any luck with the FPGA method on the VU+ Solo 2?
I am in a quandary whether to ftp to \lib\modules\3.3.8-2.0\extra ?
I apologise for my questions, I don't know enough about the risk / benefits - perhaps you could take some time to explain a little please. Could you also point me to where I can find the current driver versions on ViX, or does this require a terminal command?
Rob van der Does
06-03-14, 22:02
You can manually FTP the files to the mentioned folder and reboot your box.
Any kernel update was quite some time ago.
Thank you Rob. Now I see the driver version and update date - see Information / About from the Menu functions
It makes sense when you see the name of update files posted above "vuplus-dvb-modules-vusolo2-3.3.8-4.4.3-20140306.tar.gz" (my screen shot is the previous driver date from December 2013
32989
Rob van der Does
07-03-14, 07:30
I'm not sure what you mean but if you manually update the drivers you won't see that reflected in the info of the about-screen.
As rob says the info> about screen is only updated when the image is, so the driver versions will still show the older ones when manually updating drivers.
Sent from my GT-I9300 using Tapatalk
20140310
- Fix PCM MultiChannel problem(solo2, duo2)
- Fix vtuner PIP
- Fix Dual tuner loop-through input from single tuner(duo2, ultimo)
Update drivers
20140403
- Fix audio problem(duo2, solo2)
update driver
20140418
- Fix DVB-S2 Single(AVL6211) tuner problem(duo2, ultimo)
- Change nim_sockets of DVB-T2 tuner(duo2, needs a E2 update)
update driver
20140424
- Fix multichannel audio problem(solo2, duo2)
Rob van der Does
24-04-14, 19:14
update driver
20140424
- Fix multichannel audio problem(solo2, duo2)
Is in build 007
Update driver
20140829(solo2, solose)
- Fix transcoding problem(solo2, solose)
- Optimize memory usage(solo2)
update drivers
20140925 (http://code.vuplus.com/gitweb/?p=vuplus_openvuplus;a=object;h=20140925)(duo2, solo2, solose)
- Fix HDMI problem in some AV receivers
- Fix WOL problem(duo2)
- Fix AGC/SNR display(SSH108)
- Fix misc bugs.
Hi,
I did not find them yet.
Ralf
Rob van der Does
26-09-14, 06:30
They have indeed not been published (yet?) as downloadable files. But it should be possible to use them when building an image.
thestoress
26-09-14, 10:00
How do you update these current drivers for Solo2. And another question, I am on 037 and I do software update everyday it says that view the changes and there is no changes?
update drivers
Will these drivers finally make the qwerty keyboard on the Ultimo remote control work again?
The latest image where it worked was Apollo 24.
Rob van der Does
26-09-14, 16:43
No idea, as the 'Fix misc bugs' doesn't explain much.
They will be in next build, so give it a try.
Rob van der Does
27-09-14, 07:32
They will be in next build, so give it a try.
They will not, as VU didn't release them yet.
Rob van der Does
29-09-14, 21:04
Build 41 holds the new drivers.
Will these drivers finally make the qwerty keyboard on the Ultimo remote control work again?
The latest image where it worked was Apollo 24.
Unfortunately it didn't, the qwerty keys still don't work in Apollo 41.
Hi,
it´s no direct driver problem as they are working in original image.
ciao
Rob van der Does
30-09-14, 12:05
Yeah, I thought so. 'Something' has chanced, so our original 'hack' doesn't work any more. Not sure if that 'something' is in drivers or in E2 or in OE.
Hi Rob,
VU changed a lot internally with the new driver as we both know. Not every update/upgrade is only good. Here we have 2 negative things:-(
ciao
Hi,
some news today:
- Support 1080 Framebuffer(duo/solo need kernel update)
- Support Dual DVB-T2/C Tuner(uno, ultimo, duo2)
- Support 4 vtuners(solose, vtuner is mutually exclusive with transcoding)
ciao
DaMacFunkin
21-10-14, 07:03
Dual dvb-c tuner, I want one, please gimme gimme.....
STILL nothing about the qwerty keyboard on the Ultimo remote control that hasn't worked after Apollo 24?
Rob van der Does
22-10-14, 04:29
Nope, and I never expected that either.
Albeit having been asked to do so several times, VU has never implemented their R/C's the proper way; we had to make a hack to get them working in the first place. So why would they chance this arrogant attitude after being so stubborn for years?
update drivers
20141021
- Support 1080 Framebuffer(duo/solo need kernel update)
- Support Dual DVB-T2/C Tuner(uno, ultimo, duo2)
- Support 4 vtuners(solose, vtuner is mutually exclusive with transcoding)
I'm wondering whether the duo/solo will soon receive a further kernel update (beyond 3.9.6)? I've reverted to using cacheflush plugin on my duo because the memory leak with vtuners is still a problem with 3.9.6. I doubt they'll ever fix this properly:(.
Also, 4 x vtuners is already available on the solo2 and duo2 without restricting transcoding... so the restriction mentioned above may only apply to the solose.
cheers
Rob van der Does
22-10-14, 10:12
Build 64 holds the new drivers and the required kernel config update for the DUO/Solo2.
DaMacFunkin
22-10-14, 10:44
If only someone actually knew when the new tuners would be available...
Update drivers
201412005 (zero, solose)
- Improve PQ(zero)
- Adjust LED birghtness(solose, zero)
Rob van der Does
05-12-14, 22:06
Is in build 97
update drivers
20141229
- Improve media playback
- Fix tuning problem in DVB-S2 Single(AV6211) tuner(duo2, solose, uno, ultimo)
Already committed and will be in the next build.
People reported problems with media playback using the new drivers, so it's better to stay away from the update.
People reported problems with media playback using the new drivers, so it's better to stay away from the update.
There were issues with the previous drivers, slightly better but still not perfect.
No, the 29.12. drivers are flaky, VU+ already released new ones (31.12.).
they are being built now into build 114.
update drivers
20141231
- Fix media playback problem
Rob van der Does
31-12-14, 12:41
They are in build 114
VU+Drivers Update: 09/01/2015
update drivers
20150109
- Fix 1080P skin problem
- Fix occasional spinner in media playback
vuplus-dvb-modules-bm750-3.9.6-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-3.9.6-20150109.tar.gz)
vuplus-dvb-modules-vuduo2-3.13.5-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.13.5-20150109.tar.gz)
vuplus-dvb-modules-vusolo-3.9.6-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-3.9.6-20150109.tar.gz)
vuplus-dvb-modules-vusolo2-3.13.5-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo2-3.13.5-20150109.tar.gz)
vuplus-dvb-modules-vusolose-3.13.5-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolose-3.13.5-20150109.tar.gz)
vuplus-dvb-modules-vuultimo-3.9.6-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-3.9.6-20150109.tar.gz)
vuplus-dvb-modules-vuuno-3.9.6-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-3.9.6-20150109.tar.gz)
vuplus-dvb-modules-vuzero-3.13.5-20150109.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuzero-3.13.5-20150109.tar.gz)
Hi ...
Surely they will be in the next build ... ;)
But when i want to use them today, can i put them in this folder ?
lib/modules/3.13.5/extra
CU No.Trace
Hi ...
Surely they will be in the next build ... ;)
But when i want to use them today, can i put them in this folder ?
lib/modules/3.13.5/extra
CU No.Trace
They will be in the image soon (after Apollo build 120 as that build has already gone live with new drivers for the Gigablue receivers), you can load them manually if you wish and they do indeed fix most of the lag issues with the ViXBMC_Bello_1080 skin on Vu+ hardware.
Hi ...
yesss ... now the HD Skins work ;) Thanks a lot.
CU No.Trace
update drivers
20150302
- Fix DVB-T tuner detection in new E2 frontend
- Fix misc bugs.
Vu+ Duo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-3.9.6-20150302.tar.gz
Vu+ Zero
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuzero-3.13.5-20150302.tar.gz
Vu+Uno
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-3.9.6-20150302.tar.gz
Vu+ Ultimo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-3.9.6-20150302.tar.gz
Vu+ Solo SE
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolose-3.13.5-20150302.tar.gz
Vu+ Solo 2
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo2-3.13.5-20150302.tar.gz
Vu+ Solo
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-3.9.6-20150302.tar.gz
Vu+ Duo2
http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.13.5-20150302.tar.gz
Hi there ...
i pu them in the right folder ... but after the reboot my solo2 wont start anymore.
I did a reflash and now i dont try them again on my own ;)
CU No.Trace
new drivers will be in next build bud :)
Hi Rossi ...
Yes, next time ill wait for you guys ;)
CU ...
update proxy drivers and utils
20150317
- Support new Gstreamer sink interface(OE update will follow)
- Fix blurred graphic problem
Vu+ Duo
vuplus-dvb-modules-bm750-3.9.6-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-3.9.6-20150317.tar.gz)
Vu+ Zero
vuplus-dvb-modules-vuzero-3.13.5-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuzero-3.13.5-20150317.tar.gz)
Vu+Uno
vuplus-dvb-modules-vuuno-3.9.6-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-3.9.6-20150317.tar.gz)
Vu+ Ultimo
vuplus-dvb-modules-vuultimo-3.9.6-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-3.9.6-20150317.tar.gz)
Vu+ Solo SE
vuplus-dvb-modules-vusolose-3.13.5-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolose-3.13.5-20150317.tar.gz)
Vu+ Solo 2
vuplus-dvb-modules-vusolo2-3.13.5-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo2-3.13.5-20150317.tar.gz)
Vu+ Solo
vuplus-dvb-modules-vusolo-3.9.6-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-3.9.6-20150317.tar.gz)
Vu+ Duo2
vuplus-dvb-modules-vuduo2-3.13.5-20150317.tar.gz (http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuduo2-3.13.5-20150317.tar.gz)
As always you can either choose to wait for these drivers to be added to the image (usually in the next build ot two), or you can FTP them over manually if you want to try them rite now.
where to FTP them to please
It's not quite that easy,
1. using 7-zip extract the driver file you downloaded to your desktop.
2. Telnet into the receiver and issue the init 4 command to place enigma to sleep.
3. FTP into the receiver and navigate to lib/modules/2.6.18-**/extra. (The red bit corresponds to the kernel version of your image).
4. copy the drivers already on your receiver to a safe place, just in case.
5. Delete the old drivers and Copy the new drivers to the receiver.
6. reboot your receiver.
If the image does boot back up or you experience any strange issues directly after transferring the drivers over either reflash or put the older drivers back using the same procedure as above.
cheers.i think i;ll just wait for an update. ta
More new drivers released today no downloads as of yet though.
update proxy drivers and utils
20150318
- Fix resolution problem when 720P skin is in use
Just about to install ApolloDev-153-20151403 on the Duo2 but I always wait until the New Drivers are incorporated into the image just to be safe :)
update proxy drivers and utils
20150403
- Fix problem in new Gstreamer interface
update drivers
20150406 (http://code.vuplus.com/gitweb/?p=vuplus_openvuplus;a=object;h=20150406)(duo, solo, uno, ultimo)
- Support satip(OE update will follow. Other models are already supported)
update proxy drivers and utils
20150511 (http://code.vuplus.com/gitweb/?p=vuplus_openvuplus;a=object;h=20150511)
- Fix tuner status information
- Fix loop through(solose v2)
- Fix Scart(duo2)
Rob van der Does
13-05-15, 06:59
They are in build 007, which has been released yesterday (via online update)
They are in build 007, which has been released yesterday (via online update)
Rather in build 008
Rob van der Does
13-05-15, 09:59
Yep .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.