ET9000 help

[slasher71]

Hi

Have setup cccam & used the sticky guide to get the white sly card to work with this box
All channels work...except for movies any ideas?

Thanks in advance

Regards

Slasher

[jcm193]

Do you have skysports as well is this open? it sounds to me that you need to enter your boxkey your have to google it for more info.

[slasher71]

Hi Jcm

Thanks for your reply

no I don't have sports, just everything including movies

[slasher71]

sorry forgot to add
Every other channel works fine
checked & double check the boxkey & it is correct

[Sicilian]

Have you run an upto date scan of 28.2?

[Enzo]

Hi,

I have this card not, but have you tried with Scam 3.53/3.59

[Sicilian]

Hi,

I have this card not, but have you tried with Scam 3.53/3.59

Oscam is the way to go with a Sly UK card ;)

[slasher71]

Thxs Sicillian will give Oscam a try

[Enzo]

Ok thanks, but the HD+(German card)and sky Italia works very well with scam,scam is very fast and with oscam all cards run very well

[Enzo]

@ slasher71

Can you please also testing scam,with your card.
Oscam is a bit difficult to configure,but is very good

[jcm193]

I looked at oscam but i would not know where to start,especially sharing with my tm600 in the bedroom

[Enzo]

I looked at oscam but i would not know where to start,especially sharing with my tm600 in the bedroom

Hi,
What is your configuration in oscam and ccam you also tried it?
which card you have?

[jcm193]

No ive not tried oscam its way to complicated for me,ive got a skyuk card Enzo

[Enzo]

in cccam ECM times are too slow, so take many people the scam for select kino.
Or is on the Sky Uk: Sky Movies Box Office.
I don`t no running scam with Sky Movies Box Office

@jcm193

Have you tried with CCAM,when you have oscam,you need (oscam.server and oscam.user) correctly entered.

[jcm193]

Ive not even entered the oscam config and it makes no sense to me at all,cccam works fine on my card except for pick tv,which i never watch anyway

[Enzo]

Ok no problem,and with sharing,have you problem with your card with ccam?
Oscam is just very flexible.

[jcm193]

No problems with cccam i guess oscam is just a little more future proof

[Stanman]

For internal Oscam is pretty easy to configure and there are plenty of dummy configs on the net, google is your friend. One Thing I would advise is to use Filezilla and not DCC for your ftping and changing of permissions.

[slasher71]

I've tried oscam but still can't get the sly card to show movies
Have tried various websites for info but still can't get the card to run with movies

The sly card is in the top slot

when the card is inserted the address shows /dev/sci1
the info bar also shows server /dev/sci1
in cccam.cfg it has BOXKEY: /dev/sci0 ** ** ** **

ecm.info & ecm0.info shows - /dev/sci11

could this be the issue?

[Stanman]

I've tried oscam but still can't get the sly card to show movies
Have tried various websites for info but still can't get the card to run with movies

The sly card is in the top slot

when the card is inserted the address shows /dev/sci1
the info bar also shows server /dev/sci1
in cccam.cfg it has BOXKEY: /dev/sci0 ** ** ** **

ecm.info & ecm0.info shows - /dev/sci11

could this be the issue?

Thats your problem the boxkey is pointing to the wrong card slot it needs to be sci1.

[basilyoung]

There is a lot of chat about sharing in this thread, please aviod it, as its breaching the rules

as far as assisting a card read,via the various methods, to allow viewing of the card, thats OK chaps

Thanks

[slasher71]

Thats your problem the boxkey is pointing to the wrong card slot it needs to be sci1.

I thought sci0 was the top slot & sci1 was the bottom

I was wrong sci0 is the bottom slot

Is this the same for everyone

now it's working fine in the bottom slot with movies :confused:

[basilyoung]

on most recievers this would be correct but for some reason ( not yet checked out by myself ) it appears that its the opposite on the clarke tec 9000, on the 5000 I suspect it will be sci0

[Alias1]

For future reference guys
http://www.world-of-satellite.com/showthread.php?7609-Oscam-setup

[slasher71]

on most recievers this would be correct but for some reason ( not yet checked out by myself ) it appears that its the opposite on the clarke tec 9000, on the 5000 I suspect it will be sci0

Very strange

Not sure why they would do this? it's not logical :confused:

Can't understand how the card was being read in the other slot & everything else working except for the movies :confused:

[Stanman]

Its the same on all ET9000. The card can be read in any slot, your problem was the. BK in cfg file was pointing to the wrong slot, from the one the card was in. Nothing strange in that, box was working fine.

[olerocker]

Hi friends i am kinda new to this site lokks great though and very helpful congrats.
I have one question though, I am using a sly white card in my et9000 with oscam.
Is it safe to use it in the internal reader or is there a chance of burning it.
Thanks for any reply.

[Stanman]

Hi friends i am kinda new to this site lokks great though and very helpful congrats.
I have one question though, I am using a sly white card in my et9000 with oscam.
Is it safe to use it in the internal reader or is there a chance of burning it.
Thanks for any reply.
Stick it in and away you go, been using one for 8 months or there abouts and no problems whatsoever, runs slightly hotter than a DUO but still cool to the touch. I have never OC mine so if you dont wont be a problem.

[olerocker]

Thank you for your reply, no need to overclock