PDA

View Full Version : Vu+Uno CAMS ( hardware not softcams )


Larry-G
29-05-11, 08:25
I recently saw a thread on another forum detailing a problem with CAM units on a Vu+Duo, so i thought i'd test my collection on the Uno i am using and post the results here.

NB all the below cams have been tested and are working on my DM 7020 prior to testing on the Vu+Uno
====

ORIGINAL

seca aston black rev 1.03 NOT DETECTED confirmed with two cams of the same revision
seca aston black rev 1.04 FULLY WORKING confirmed with two cams of the same revision
seca aston black rev 1.05 FULLY WORKING
seca aston black Hardware revision 1.2 software v 1.05 FULLY WORKING
SECA ( mediaguard branded cam ) NOT DETECTED
viaccess black rev 1 NOT DETECTED
viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING
Irdeto 1 freecam ( softcell ver 2.06 ) FULLY WORKING
Irdeto 1 freecam ( FreeCAM 2-019 ) FULLY WORKING
irdeto 2 freecam rev 1.1 ( irdeto common interface ver 01.06 ) P/N 901275 FULLY WORKING
irdeto 2 ( consumer / purple ) (softcell 2.21A / application ver 1.11.003) FULLY WORKING
irdeto 2 ( purple / white ) ( loader ver 3.1 / softcell ver 2.26D ) FULLY WORKING
conax ( technicrypt - technisat cx ) software ver 26.1.5.0.6 interface ver 0x40 FULLY WORKING
conax Telnor CAM-3.03 NOT DETECTED
conax Telnor CAM-2.01 NOT DETECTED
cryptoworks ( phillips ) NOT DETECTED
nagravision SCM v1.0 NOT DETECTED

magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon module rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
T-rex twin module ver 1.0 rev 4.1 ( firecrypt ) FULLY WORKING
T-rex super module rev 4.6 ( firecrypt ) ( PREDASAUR 2.40 ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
diablo 2 light ( diablo 1 rev 2.3 light updated to diablo 2 light via software patch ) ( Ipnosys034 ) FULLY WORKING
Icecrypt blue rev 2.01 ( joker cam 1.17 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
Icecrypt blue rev 2.01 ( joker cam 1.18 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
zeta orange rev 2.01 NOT DETECTED
zeta blue rev 2.01 P/N 1250/2002 FULLY WORKING
matrix reloaded ( mr 1.082 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix revolutions ( mrv 2.24 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix reborn ( neo 4.11 ) HW 1.5 / loader 1.0 FULLY WORKING
Magic module rev 1.04 P/N 8105/2002 FULLY WORKING
Magic module rev 1.05 P/N 8106/2003 ( neo 4.11 ) FULLY WORKING
Free-x tv rev 2.01 PRD-CAM0-0102 P/N 1250/2002 ( icecrypt black clone ) joker 1.17 kamilz FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
AXAS cam model 44Y2 ver 1.55-4 H/W 1.5 S/W Mrb 3.07 loader 1.0 FULLY WORKING
AXAS cam II ( icecrypt black clone ) model 44Y2 ver 1.55-4 NOT DETECTED



I will add to and update this thread as and when i obtain new cams to test. NB all cams here have been tested by my self, none of this information has been taken from any other source.
Larry-G
01-06-11, 12:57
viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING
Larry-G
04-06-11, 18:00
seca aston black rev 1.04 FULLY WORKING
Larry-G
10-06-11, 10:44
diablo 2 light ( diablo 1 rev 2.3 light updated to diablo 2 light via software patch ) ( Ipnosys034 ) FULLY WORKING
Larry-G
15-06-11, 07:59
Irdeto 1 freecam ( softcell ver 2.06 ) FULLY WORKING
Larry-G
15-06-11, 14:50
T-rex twin module rev 1.0/4.1 ( firecrypt ) FULLY WORKING
Larry-G
21-06-11, 14:16
irdeto 2 ( consumer / purple ) (softcell 2.21A / application ver 1.11.003) FULLY WORKING
Larry-G
27-06-11, 14:32
seca aston black rev 1.05 FULLY WORKING
Larry-G
28-06-11, 13:26
cryptoworks ( phillips ) NOT DETECTED
Larry-G
30-06-11, 13:14
T-rex super module rev 4.6 ( firecrypt ) ( PREDASAUR 2.40 ) FULLY WORKING
Larry-G
08-08-11, 16:26
some new additions to the list.

Irdeto 1 freecam ( FreeCAM 2-019 ) FULLY WORKING
Magic Cam rev 1.05 P/N 8106/2003 NOT DETECTED
free-x tv rev 2.01 PRD-CAM0-0102 P/N 1250/2002 ( icecrypt black clone ) NOT DETECTED

I would also once again like to take this opportunity to thank SILVERFOX0786 and BASSETHOUND for their very generous donations of cam modules for inclusion into my collection.

many thanks again fellas it is really appreciated.
Larry-G
16-09-11, 13:03
seca aston black hardware revision 1.2 software v 1.05 FULLY WORKING
Larry-G
27-09-11, 14:09
irdeto 2 freecam rev 1.1 ( irdeto common interface ver 01.06 ) P/N 901275 FULLY WORKING
Larry-G
04-10-11, 16:38
SECA ( mediaguard branded cam ) NOT DETECTED
Larry-G
14-10-11, 16:22
AXAS cam model 44Y2 ver 1.55-4 H/W 1.5 S/W Mrb 3.07 loader 1.0 FULLY WORKING
AXAS cam II ( icecrypt black clone ) model 44Y2 ver 1.55-4 NOT DETECTED
nagravision SCM v1.0 NOT DETECTED
matrix reborn NOT DETECTED POSSIBLY FAULTY NEEDS FURTHER INVESTIGATION
Magic module rev 1.04 P/N 8105/2002 FULLY WORKING
coanx Telnor CAM-3.03 NOT DETECTED
coanx Telnor CAM-2.01 NOT DETECTED
Larry-G
14-10-11, 22:50
small update. just updated the matrix reborn cam with neo 4.11 firmware and it is now fully working in the Uno.
first post updated.
Larry-G
14-10-11, 23:09
update number 2. magic module rev 1.05 P/N 8106/2003 flashed with neo 4.11 firmware ( matrix reborn ) now fully working in Uno

post number 1 updated with this new information.
Larry-G
20-01-12, 12:25
Small update. 3 previously Undetected cam's now fully working after the 18.01.2012 drivers update.

Free-x tv rev 2.01 PRD-CAM0-0102 P/N 1250/2002 ( icecrypt black clone ) joker 1.17 kamilz FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
Icecrypt blue rev 2.01 ( joker cam 1.18 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
Icecrypt blue rev 2.01 ( joker cam 1.17 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
Larry-G
27-01-12, 16:53
zeta blue rev 2.01 P/N 1250/2002 FULLY WORKING