View Full Version : How to setup picons onto usb stick ViX
In this tutorial I am going to show you how to put picons onto usb stick. This is 1 of a few ways of doing this and for me this is easier than unplugging usb plugging back in etc lol
For this you need a usb stick formatted as fat32 or ext3 and the usb to be mounted correctly in device manager as media/usb
You can check if this is the case by going to Menu/Setup/ViX/Devices Manager and should look like this below;
8413
If your usb isnt mounted correctly then press "Green" to setup mounts then highligh usb and use you left and right arrows on your remote to get to media/usb and then press "Green" to save the settings
8414
Download your desired picon set from the link below and extract the file
http://www.world-of-satellite.com/forumdisplay.php?35-Picons
Once usb setup correctly you will need to connect via FTP into the box
For those that don't know how to setup FTP to the box then follow the first few steps of this guide to get your ftp setup
http://www.world-of-satellite.com/showthread.php?8704-How-to-Install-CCcam-MGCamd-Others-on-Duo-Solo-Uno-ET9000-ET5000-ViX&p=64577#post64577
Once connected to your box you should see the screen below (or similar)
8415
Go to media/usb/ and create a folder in there called picon. so it should look like the screen below
8416
Then transfer all the images from the picon set that you downloaded into the picon folder and once complete it should look like so
8417
Reboot the box if needed and the picons will be displayed in the info bar
8422
If you also want the picons to be displayed in the epg then press the epg button on your remote and then menu
If using PIG (Picture in Graphics) then you will need your settings to match below;
84198418
If not using PIG (Picture in Graphics) then you will need your settings to match below;
84208421
And thats it you now have picons setup on your ViX Image :D
Hi,
got all picons setup and running properly on VIX 2.1 but for some reason since VIX 2.0 I have been unable to get them displayed in the EPG. I've got all my settings as yours there but still no joy. Picons show up fine on the channel info. Any ideas?
thanks
Have you a restart after making the changes?
Also def mounted as USB and not SDA1
Yes mate I've restarted a number of times since I've had this issue for a while. Also the USB drive is mounted as USB.
what version of vix did u say you wer on?
I'm on 2.1 now but also had this problem on 2.0
Have u tried updating to 2.2 as the tutorial above was really for 2.2 but should still work with 2.1
Oh I thought that was an older post. I'll leave it be for the moment then as I've got everything else running sweetly and don't wanna stir things up by upgrading.
have you tried just restarting the box and seeing if that brings the picons back in the epg?
Yeah mate restart didn't work. Here's a screenshot of the channel info that shows picons work there (I've changed my skin since the screenshot I posted earlier).
I cant see what is wrong with the settings you posted above they seem to match what i have and the fact that ur picons show in channel infobar suggest that picons are set ok otherwise they wouldnt even show up in there. where are you picons stored anyway? also have you had a look in menu/setup/vix/devices manager and what is the devices in there mounted as?
Picons are stored in /media/usb/picon and I'm attaching a screenshot of my devices...
everything looks perfect mate same as mine. i really dont know what could be the problem. if in doubt u could always try a reflash of the latest image and see if that sorts it if u want. but im not too sure unless someone can see something i am missing lol
ah no worries mate thanks anyway it's not too important. Must be some gremlin in the box. If I find myself a couple hours I might stick 2.2 on there.
cheers
kool well let us know how it goes and ill keep seein if i can figure out whats wrong with it lol
charliesen
05-07-11, 23:12
Have you tried displaying fewer channels in the epg ? I have mine set at 5
Have you tried displaying fewer channels in the epg ? I have mine set at 5
He has, in one of the screen shots on the first page showing the vix epg menu.
Def strange behaviour.
Stuck the USB into the Duo and its coming up FAT16 R/W but if I stick it into the laptop its say FAT32!
Any ideas?
just format it via the devices manager to ext3 or reformat it on ur laptop to fat32
just format it via the devices manager to ext3 or reformat it on ur laptop to fat32
But it already is FAT32 according to the laptop!
But the Duo is saying FAT16 R/W which is baffling me.
try formatting it with this tool
http://www.world-of-satellite.com/showthread.php?45-USB-Format-Tool
see if that makes the duo recognise it as fat32. see if it works with the picons too
Just remembered that I used this same usb to flash the image and it worked so just follwed the above guide and it has worked a treat though one anomaly I have noticed.
I use the rytec uk epg and noticed after install of the picons that the epg was empty.
I had to download the 7 days once again but now all seems well.
Hi redout,
Did you manage to sort this?
I'm experiencing exactly the same behaviour.
My picons are in /media/usb/picon they show up fine when changing channels, but refuse to display within the ViX EPG.
I'm using ViX 2.3 with a Vu Duo.
Have you enabled picons in epg? Go to epg and press menu then settings
Hi Punisher, Thanks for the reply.
Yes I had turned it on and off a number of times and rebooted a few times too.
I have managed to get the picons to display by reducing the number of lines (channels) showed from the default of 11 down to 6. They then magically appeared. It seems that with 10 channels the icons still stay there but with 11 they are gone completely.
So the solution is to reduce the number of channels shown.
If you mount picons via usb , does usb have to remain in usb port on box all the time to work?
If you mount picons via usb , does usb have to remain in usb port on box all the time to work?
Yes it does.
Hi!
I am running following setup;
Devicename: Vu+ Ultimo
Enigma Version: Jun 28 2012
Image Version: 2.4
Frontprozessor Version: VNone
Webinterface Version: 1.6.8
My problem is the other way around, compared to the discussion earlier, regarding the picons. That is, I can see all picons in VIX EPG, but they do not show up in the Channel info. Anyone experienced this, and any ideas to overcome the problem?
Regards,
Johan
Where are ur picons stored?
Picons are stored in /media/usb/picon
As said above, I can see the picons in the VIX EPG just fine, but in the channel info they are not shown. Can e.g. height/width ratio or other things about the pictures themselves matter? What factors can prevent the picture to be seen in the channel info, but still seen in the EPG? I have tried several skins also, but result is always the same.
root@vuultimo:/media/usb/picon# ls -l
-rwxrwxrwx 1 root root 3263 Jul 5 22:48 1_0_19_1BC_D_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2395 Jul 5 22:43 1_0_1_11_3_F_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2319 Jul 5 22:44 1_0_1_15F_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2089 Jul 5 22:46 1_0_1_211_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2491 Jul 5 22:44 1_0_1_21_3_F_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2822 Jul 5 22:44 1_0_1_31_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2384 Jul 5 22:45 1_0_1_51_3_F_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2552 Jul 5 22:45 1_0_1_61_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 3041 Jul 5 22:45 1_0_1_71_3_F_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 2304 Jul 5 22:45 1_0_1_81_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 1525 Jul 5 22:46 1_0_1_A1_2_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 1919 Jul 5 22:47 1_0_1_B2_C_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 1365 Jul 5 22:47 1_0_1_C89_8_0_FFFF0000_0_0_0.png
-rwxrwxrwx 1 root root 1312 Jul 5 22:47 1_0_1_E1_2_0_FFFF0000_0_0_0.png
Which picon set do you use just out of curiosity?
Hi!
I don't use any specific picon set, since I couldn't find any set for free-to-air channels (DVB-T and C) in Finland. I made my own set. That's why I wonder if there's any rules of picture size/ratio etc. in order for it to work. At least the naming of the pictures in the picon directory seems to be correct as they show up in the epg.
/johan
Its going to be the size i think then. What size are your picons? I cant remember what theyre meant to be as not at a computer to check. Maybe someone else can jump on n let you know...
i have the settings like you but now on 3.0 and wont use the hd picons from my usb stick
when you install vix on meboat your picon in media/meoboot/share/enigma/picon
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.