007.4
09-05-11, 10:34
Hi All
I've recently upgraded from a DM7000 to a Vu+ Duo and need to use a Phoenix reader on the rs232 port. Card works at 6MHz.
Using the same working oscam configuration as before, the card does not initialize properly.
I had to change the device location to
device = /dev/ttyS0
to get the port recognised.
Is this port enabled for a card reader in the Vu+? Do I need any additional drivers?
I've done a search but found no answers.
The internal slot does not appear to work at 6MHz either.
[BTW There is a similar problem with the DM7025 - the serial port does not work for a card reader.]
TIA
007.4
I've recently upgraded from a DM7000 to a Vu+ Duo and need to use a Phoenix reader on the rs232 port. Card works at 6MHz.
Using the same working oscam configuration as before, the card does not initialize properly.
I had to change the device location to
device = /dev/ttyS0
to get the port recognised.
Is this port enabled for a card reader in the Vu+? Do I need any additional drivers?
I've done a search but found no answers.
The internal slot does not appear to work at 6MHz either.
[BTW There is a similar problem with the DM7025 - the serial port does not work for a card reader.]
TIA
007.4