PDA

View Full Version : TECKNOMATE patch 14/03/20211 there are both new DW & UR (happy image) in post



reddishd
14-03-11, 12:52
this is the UR Happy Image with lionk to official site.
Here is the lated offerings from Technomate:-


If you want to be happy with your tm800 please read bellow

http://download.for-better.biz/bbs/main.php <<<<This the link you will all you need
====================================
This is the way to do it
Use latest image from download centre please do not use any other images use only UR for this test
Below testing is to give you 100% confidence that there is nothing wrong with tm800 image and hard ware
once you are happy
download anything's you want
download them one at the time until you find what causing the problem
---------------------------------

For 100% full Result

In my experience with tm-800 if instruction fallowed as below there will not be any green screen or freezing or any other faults with latest image
-----------------------------------

SECTION ONE

1-Download by USB and get latest image from download centre only not other places {it might be possible image has been corrupted by different means
2-Do full factory reset .
3-Fallow wizard and download default channel list {if hard disk or wifi leave it for after ignore at this moment }
4-Turn off from rear for one minute
5-Test all functions use c:lines test all channels motor as many functions as you can
when test completed and you are 100% fully satisfied there is nothing wrong no green screen or freezing
6-press on USB button to find hard disk and format it off/on from rear then test all PVR functions working ok
7-use wifi setting .
8-If above has problem continues download latest again by USB ..may be image was not downloaded properly,
---------------------------------------
section 2

why green screen or freezing or menu slow down or not working properly

1-when section one done after use delete channel list by pressing blue button once see menu press red button delete channel list download your channel list
play with receiver if any problem channel list is doing
--if all ok
2-download any plaguing one by one and test each time and add as last one did not show any problem
3-add any thing in add on one by one
4-if there is problem find out which add-on or plagins or any new entry created problem go back and start again.
5-adding cams channel list and more add on of any kind will create memory hung-up in the ram this will create problem
6-turn off/on from rear to dispose of collected ram
7-make sure signal is always above 80%
8-at no signal menus are very slow
---------------

if above creating problem do factory rest and start from section one
--------------------------
I test Linux boxes at least few hours a day I found out why some people getting problems
1-using different channel list from any Linux receivers expecting to work perfect {this is wrong if create problem then no point in using it }
2-Too many cams-add-on-skins Etc. have been saved this will slow down the receiver >>> so delete what you do not want
3-do not download another channel list on the top of exciting one--delete or factory reset first before scan or download
4-turn off tm800 from the back at least 2 or 3 times a week
-----------------------------------------------------------
If you have tm-800 with lots of problems check first
1-check if jtag done {any tm-800 sold after 31-11-10 jtag has been done }
2-check for latest image from download centre
3-after download do as per section one.
----------------------
Latest Image is a total re vamp of all and it is totally different to past image.
please take my advise and download latest image from download centre it is the best till today and test result has been 100% ok


http://download.for-better.biz/bbs/main.php
################################################## #########
#################### New DW image ############################
################################################## #########


Here is the DW image.

The link if from a trusted by Technomate site.

Improvement :
1. New default HD skin
2. Improved PVR function( EXTERNAL USB HARD DISK ONLY {SATA INTERNAL IS TEST VERSION }
3. Fixed deep standby bug
4. Fixed hang-up bug as changing HD skin on network, USB menu
5. Parental Control (Menu -> Setup -> Parental Control)
A. Set default 0000 setup pin code0000 as 0000
B. Made Parental lock Bouquets working (protect services -> Edit bouquets list)
6. When factory reset, it will ask Setup pin code, set in Parental Lock USE 0000
7- Please check ;
Multimedia
1.Stability of general functioning (menu and AV etc.)
2.Multimedia ; MP3, picture album and audio playing in movie file(video is not ready yet)

Hope this helps
PS THIS IMAGE IS ONLY FOE Jtaged STB`s.;):)

Thanks, reddishd.