View Full Version : usals setup help
how do i set it up on this box
ive put in the latitude and longitube in then went onto automatic scan
my dish move west and its been on for 2 hours found nothing
is there guide to setting this up
cheers
silverfox0786
11-03-11, 22:46
menu
setup
service serching
tuner configuration
then set up yout lats on each yuuner u wanna use
basilyoung
11-03-11, 23:02
USALs do depend on the motor/dish being setup correctly
in tuner config, ( menu, setup, tuner config ), how have you got the unit setup, ie; tuner A is set to what?? static dish, or motorized? Tuner B, same question
the tuner with the motor connection, if you have a static dish as a second option, should be B = MOTORIZED and tuner A set to static
tuner B would then need your USAL settings ( most likely best set to simple, rather than advanced )
tuner A if static, should be set to single satellite, ie, at a guess 28 east
baz
ive set tuner a to usals not using tuner b atm
ive set it to simple put my long/lat goes to 1w but no signal try moving west and east no signal what so ever
thought i could have blow the lnb but poped my azbox back and work straight away
my question is do i need to use tuner b instead of a to set usals up
this has got to be the hardest box ive had to set up 5 hours now not 1 sat its found
basilyoung
11-03-11, 23:39
IF you intend having a second dish, the I would recommend Tuner B as your motorized dish, however, if your AZ unit works ok on all sats, then so should the VU
are you sure the dish is actually moving, with the VU ??
check that the positioner option in your tuner config is set to 1.2 disque
if it is, then I would adjust the east west settings by 1 degree incriments
if the dish is not moving, try going to advanced, again put in your usal setting,
and select "extra voltage" as well
in advanced, once your basic settings are in place...you then scroll back to satellites, and select the next sat that you want, ( set all sats to lnb 1 ) and repeat untill you have the sat you require, for quickness, select say 28/19/13 east, and 1 west
use sat finder to see if you are locking on sats, or passing them
baz
thanks for all your help
but i still couldnt get it working
i had to do it manually
its the first time ive had problems with usals
next trying to get cccam working
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.