PDA

View Full Version : Wrong data transmission



tandaman
01-03-11, 14:23
Hi lads I have a friends tm-500 super trying to sort it out for him. Everything installed and newest software for the box 18-2-2011 installed. But when I turn on a channel I get Wrong data transmission on the screen. I then need to diconnect the lnb cable and reinsert it...Any help is appreciated.

Larry-G
01-03-11, 14:25
load a newer bouquet pack. i use the silverfox E1 packs on both my tm600's

tandaman
01-03-11, 15:49
Tried that still nothing

punisher
01-03-11, 16:22
Have u done a rescan?

Larry-G
01-03-11, 17:07
update your satellites.xml file and do a rescan.

tandaman
01-03-11, 17:40
Will try it thanks

Stanman
29-12-11, 22:26
Tandaman, how did your mate sort this?

neil306
30-12-11, 00:48
if you press exit on remote it will go
my experience of this is if you are using a slow motor you get this message even after it finds the channel you have to press exit, it also happens in high winds, eg. if dish is blowing about affecting the signal then you have to turn channel over then back on again
hope this helps

Stanman
30-12-11, 12:43
My issue ismore substantial than that signal is fine.