View Full Version : German HD Transponders not receiving signal
Hi
Gigablue UHD UE 4K (Universal LNB) Openvix 6.4.010 here, While searching for some German channels, I found that some German Transponders on Astra 19° (11494H, 11361H, 11302H, 10832H, 11464H and 12544H) that many channels on those transponders were not showing, (I don't mean that the coded ones were not clearing) and the channels names would fade. My other box (Zgemma h7. openvix 6.4.010) doesn't have this problem. Most of the other HD channels (H or V) seem OK. Do you think its an LNB fault? Any help please?
Note transponder details on working box and recheck on non working box are they the same as channel movement does happen.
Are your channel details upto date when checking Kingofsats for changes.
Note transponder details on working box and recheck on non working box are they the same as channel movement does happen.
Are your channel details upto date when checking Kingofsats for changes.
Thanks for your reply!
AKAIK all channels are up to date.
Below are some (non coded channels)
Gigablue (Openvix 6.4.010, Vix-Night-HD)
11302 H
ORF 1 no work
DF1 work OK
11362 H
ZDF HD no work
ZDF neo work OK
11494 H
Das Erste HD no work
arte HD work OK
SWR BW HD work OK
Changed skin on Gigablue, same problems (tried OpenATV, all channels OK)
All nonworking on Gigablue are working OK on Zgemma H7 (Openvix 6.4.010, Skin: YouVix-Blue) plus working on Viark 4K box (That's my backup to my backup box)
Have you tried swapping boxes over to see if the fault goes with it and might narrow down the issue.
No movement on recent channels i noticed.
Have you tried swapping boxes over to see if the fault goes with it and might narrow down the issue.
No movement on recent channels i noticed.
Swapped cables between tuners on Gigablue, disconnected cable between splitter and Gigablue. Connected cable directly from Diseq to Gigablue, swapped cable between boxes, Gigablue always keeps the same problem. I'm going to try tweaking LNB tomorrow!
Are the signals of the missing stations all horizontal (H)?
How are your tuner settings (set voltage and 22KHz,send disEqC only on satellite change...)?
Are the signals of the missing stations all horizontal (H)?
How are your tuner settings (set voltage and 22KHz,send disEqC only on satellite change...)?
It does seem that the affected channels are "H", however lots of other "H" channels are coming in.
And when the Gigbblue box runs OpenATV the channels come, plus my other boxes are working fine.
Quick update, When playing some of the channels on the PC with VLC, sound and vision come through!
Quick update, When playing some of the channels on the PC with VLC, sound and vision come through!
Another update, Flashed to old image (Openvix 6.3.003) all channels appear to be clearing and behaving, OK now!
Update 20:00 hrs.
Flashed box image Openvix 6.4.009, (6.3.003 had Jedi Maker Xtream acting up) All channels appear to work correctly. I remembered today I had downloaded the one of plugins "ciefpe" a couple of weeks ago, maybe this caused my problems?
Many thanks to catikid and nekrub2 for their help!:)
Might depend if your bouquets automatically update when changes happen.
I used to use Vhannibals and the odd time there was an update to run.
No, I use Jedi and Xtreamity and update manually when get prompted. And update the bouquets by Echannelizer. Thanks again (Our internet has been acting up today as well)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.