PDA

View Full Version : Oscam webiterface not going to the the right Port


ross_37
06-10-23, 20:16
On my SX88 v2 l have upgraded the software from 6.4.004 to 6.4 006 and the upgrade has changed the Oscam configured port from :8895 to :83. I am unable to view the configuration for Oscam

Oscam Config

[webif]
httpport = 8895
httpuser = root
httppwd = xxxxx
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.11.0-192.168.20.255

When selecting Oscam Webinterface from Open webif IP address:83
ross_37
07-10-23, 15:25
I decided to do a complete install starting from scratch with release 6.4.007. Sucessfully loaded into slot 3, scanned 28.2 for channels and then loaded the softcam latest
When opening open webif l was able to see Oscam Webinterface but when selected it load's IP:83

This was a minimal install but Oscam Webinterface goes to IP:83

Is anyone else experience this?
twol
07-10-23, 15:32
I decided to do a complete install starting from scratch with release 6.4.007. Sucessfully loaded into slot 3, scanned 28.2 for channels and then loaded the softcam latest
When opening open webif l was able to see Oscam Webinterface but when selected it load's IP:83

This was a minimal install but Oscam Webinterface goes to IP:83

Is anyone else experience this?

Is installed Oscam from the feeds
ross_37
07-10-23, 16:21
The oscam was downloaded from softcams Plugins Latest
ross_37
09-10-23, 11:32
Resolved my issue by Copying the Oscam latested files to config